Op-Amps: Pinouts of LM358, TL072 and More
Single, dual and quad operational amplifiers for audio, sensing and measurement.
Operational amplifiers (op-amps) are the building blocks of analog electronics. With a few resistors they become amplifiers, filters, comparators, integrators and buffers. The right choice depends on the job: the LM358 runs from a single supply down to 3 V, the TL072 has JFET inputs with tiny input current, the NE5532 and OPA2134 are low-noise audio op-amps, the OP07 has a particularly low offset voltage, and the MCP6002 or OPA2340 swing all the way to the supply rails (rail-to-rail).
The good news: the pinouts are largely standardised. Dual op-amps in 8-pin packages have output A on pin 1, inputs A on pins 2 and 3, V− on pin 4, inputs B on pins 5 and 6, output B on pin 7 and V+ on pin 8. Single op-amps such as the LM741, TL071 and OP07 put V+ on pin 7 and use two of the remaining pins (1 and 5, or 1 and 8) for offset nulling. Quad op-amps such as the LM324 and TL074 have V+ on pin 4 and V− on pin 11.
That means one dual op-amp can usually replace another directly. The table shows the package and supply pins of every type; still check supply range and output swing in the datasheet.
Overview from the pinout data
8 of 17 parts have GND on pin 4 and the supply on pin 8.
| Part | Manufacturer | Package | Pins | Supply |
|---|---|---|---|---|
| LM741 General Purpose Operational Amplifier | Texas Instruments | 8-Pin DIP / SOIC | 8 | VCC 7GND 4 |
| LM358 Low-Power Dual Operational Amplifier | Texas Instruments / ON Semi | 8-Pin DIP / SOIC | 8 | VCC 8GND 4 |
| LM324 Low-Power Quad Operational Amplifier | Texas Instruments | 14-Pin DIP / SOIC | 14 | VCC 4GND 11 |
| TL071 Low-Noise JFET-Input General-Purpose Op-Amp | Texas Instruments | 8-Pin DIP / SOIC | 8 | VCC 7GND 4 |
| TL072 Low-Noise JFET-Input Dual Op-Amp | Texas Instruments | 8-Pin DIP / SOIC | 8 | VCC 8GND 4 |
| TL074 Low-Noise JFET-Input Quad Op-Amp | Texas Instruments | 14-Pin DIP / SOIC | 14 | VCC 4GND 11 |
| NE5532 Dual High-Performance Low-Noise Op-Amp | Signetics / TI | 8-Pin DIP / SOIC | 8 | VCC 8GND 4 |
| OP07 Ultra-Low Offset Voltage Operational Amplifier | Analog Devices / TI | 8-Pin DIP / SOIC | 8 | VCC 7GND 4 |
| CA3140 4.5MHz BiMOS Operational Amplifier with MOSFET Input | Intersil / Harris | 8-Pin DIP / SOIC | 8 | VCC 7GND 4 |
| OPA2134 SoundPlus High Performance Audio Op-Amp | Burr-Brown / TI | 8-Pin DIP / SOIC | 8 | VCC 8GND 4 |
| OPA1612 Dual SoundPlus Audio Op Amp | Texas Instruments | 8-Pin DIP / SOIC | 8 | VCC 8GND 4 |
| OPA2340UA Dual Rail-to-Rail Operational Amplifier | Texas Instruments | 8-Pin DIP / SOIC | 8 | VCC 8GND 4 |
| MCP6002 1MHz Low-Power Rail-to-Rail Dual Op-Amp | Microchip Technology | 8-Pin DIP / SOIC | 8 | VCC 8GND 4 |
| MCP6004 1MHz Low-Power Rail-to-Rail Quad Op-Amp | Microchip Technology | 14-Pin DIP / SOIC | 14 | VCC 4GND 11 |
| TLV9062IDR Dual Op Amp | Texas Instruments | 8-Pin DIP / SOIC | 8 | VCC 8GND 4 |
| THS3001 420MHz High-Speed Current-Feedback Amplifier | Texas Instruments | 8-Pin DIP / SOIC | 8 | – |
| THS4531A Ultra Low-Power Rail-to-Rail Output Fully Differential Amplifier | Texas Instruments | 8-Pin DIP / SOIC | 8 | – |
All parts (17)
LM741 General Purpose Operational Amplifier
Operational Amplifier, DIP-8/TO-99-8
LM358 Low-Power Dual Operational Amplifier
Low-Power, Dual Operational Amplifiers, DIP-8/SOIC-8/TO-99-8
LM324 Low-Power Quad Operational Amplifier
Low-Power, Quad-Operational Amplifiers, DIP-14/SOIC-14/SSOP-14
TL071 Low-Noise JFET-Input General-Purpose Op-Amp
Single Low-Noise JFET-Input Operational Amplifiers, DIP-8/SOIC-8
TL072 Low-Noise JFET-Input Dual Op-Amp
Dual Low-Noise JFET-Input Operational Amplifiers, DIP-8/SOIC-8
TL074 Low-Noise JFET-Input Quad Op-Amp
Quad Low-Noise JFET-Input Operational Amplifiers, DIP-14/SOIC-14
NE5532 Dual High-Performance Low-Noise Op-Amp
Dual Low-Noise Operational Amplifiers, DIP-8/SOIC-8
OP07 Ultra-Low Offset Voltage Operational Amplifier
Very low input offset voltage (75µV max) operational amplifier with low drift and high open-loop gain (300V/mV), making it the classic standard for precision instrumentation.
CA3140 4.5MHz BiMOS Operational Amplifier with MOSFET Input
BiMOS operational amplifier combining high-voltage PMOS transistors with high-voltage bipolar transistors on a single monolithic chip. Features 1.5 TΩ input impedance and rail-to-rail output swing.
OPA2134 SoundPlus High Performance Audio Op-Amp
Dual SoundPlus High Performance Audio Operational Amplifiers, DIP-8/SOIC-8
OPA1612 Dual SoundPlus Audio Op Amp
Dual bipolar-input audio op amp. 1.1 nV/sqrt(Hz) noise at 1 kHz, 0.000015% THD+N at 1 kHz, 27 V/us slew rate, 40 MHz bandwidth at G=+1, +-2.25 V to +-18 V supply.
OPA2340UA Dual Rail-to-Rail Operational Amplifier
Dual single-supply rail-to-rail CMOS op amp. 5.5 MHz bandwidth, 6 V/us slew rate, 750 uA/channel quiescent current, 2.7 V to 5.5 V supply, -40 to 125 C specified range.
MCP6002 1MHz Low-Power Rail-to-Rail Dual Op-Amp
1MHz, Low-Power Op Amp, DIP-8
MCP6004 1MHz Low-Power Rail-to-Rail Quad Op-Amp
1MHz, Low-Power Op Amp, DIP-14/SOIC-14/TSSOP-14
TLV9062IDR Dual Op Amp
Dual operational amplifier, 8-pin SOIC (D) package, from the TLV9061/TLV9062/TLV9064 family. Pin assignments per datasheet SBOS839N Figure 5-6 and Table 5-3.
THS3001 420MHz High-Speed Current-Feedback Amplifier
High-speed current-feedback op amp: 420MHz bandwidth (G=1, -3dB), 6500V/us slew rate, 40ns settling to 0.1%, 100mA output drive, +/-4.5V to +/-16V supply, -96dBc THD at 1MHz.
THS4531A Ultra Low-Power Rail-to-Rail Output Fully Differential Amplifier
Ultra low-power (250 uA) fully differential amplifier with rail-to-rail output, negative rail input, 36 MHz bandwidth, 200 V/us slew rate, 2.5 V to 5.5 V single supply, and output common-mode control.