SPI Flash: Serial NOR Flash Memory Pinouts
W25Q and MX25L memory in SOIC-8, WSON-8 and SOIC-16 with standard and Quad SPI pin assignments.
Serial NOR flash stores firmware, bootloaders, BIOS images and data in microcontroller projects. Almost every manufacturer follows the same 8-pin layout: pin 1 is chip select (/CS), pin 2 the data output DO, pin 3 write protect (/WP), pin 4 GND, pin 5 the data input DI, pin 6 the clock CLK, pin 7 /HOLD or /RESET and pin 8 VCC. That is why a Winbond W25Q32 and a Macronix MX25L can usually replace each other directly.
In Dual and Quad SPI mode, DI, DO, /WP and /HOLD become the bidirectional data lines IO0 to IO3, quadrupling throughput. The 16-pin SOIC versions of large devices put the same signals on different pins and leave several pins unconnected, so they are listed separately.
Mind the supply voltage: Winbond parts marked "JW" are 1.8 V devices that can be damaged at 3.3 V, while "JV" parts run at 3.3 V. The voltage has to match when reading a chip with a CH341A programmer or a test clip. The table shows the package and supply pins of every device.
Overview from the pinout data
10 of 16 parts have GND on pin 4 and the supply on pin 8.
| Part | Manufacturer | Package | Pins | Supply | Interfaces |
|---|---|---|---|---|---|
| W25Q80DVSNIG 8Mbit Serial Flash Memory with Dual/Quad SPI | Winbond | 8-Pin DIP / SOIC | 8 | VCC 8GND 4 | – |
| W25Q32JV 32Mbit SPI NOR Flash Memory | Winbond Electronics | 8-Pin DIP / SOIC | 8 | VCC 8GND 4 | SPI |
| W25Q64JVSSIQ 64Mbit Serial NOR Flash (SPI/Dual/Quad) | Winbond | 8-Pin DIP / SOIC | 8 | VCC 8GND 4 | – |
| Winbond W25Q128JWS (SOIC-8 / WSON-8) | Winbond Electronics | 8-Pin DIP / SOIC | 8 | VCC 8GND 4 | SPI |
| Winbond W25Q128JW-IM (SOIC-8 / WSON-8) | Winbond Electronics | 8-Pin DIP / SOIC | 8 | VCC 8GND 4 | SPI |
| Winbond W25Q128JWF (SOIC-16) | Winbond Electronics | 16-Pin DIP / SOIC | 16 | VCC 2GND 10 | SPI |
| Winbond W25Q128JWF-IM (SOIC-16) | Winbond Electronics | 16-Pin DIP / SOIC | 16 | VCC 2GND 10 | SPI |
| Winbond W25Q256JW (WSON-8) | Winbond Electronics | 8-Pin DIP / SOIC | 8 | VCC 8GND 4 | SPI |
| Winbond W25Q256JW-IM (WSON-8) | Winbond Electronics | 8-Pin DIP / SOIC | 8 | VCC 8GND 4 | SPI |
| Winbond W25Q256JWF (SOIC-16) | Winbond Electronics | 16-Pin DIP / SOIC | 16 | VCC 2GND 10 | SPI |
| Winbond W25Q256JWF-IM (SOIC-16) | Winbond Electronics | 16-Pin DIP / SOIC | 16 | VCC 2GND 10 | SPI |
| MX25L6433F Serial Flash Memory | Macronix | 8-Pin DIP / SOIC | 8 | VCC 8GND 4 | – |
| Macronix MX25L25645G (SOP-8 / WSON-8) | Macronix | 8-Pin DIP / SOIC | 8 | VCC 8GND 4 | SPI |
| Macronix MX25L25645G-08G Factory Mode (SOP-8 / WSON-8) | Macronix | 8-Pin DIP / SOIC | 8 | VCC 8GND 4 | SPI |
| Macronix MX25L25645G (SOP-16) | Macronix | 16-Pin DIP / SOIC | 16 | VCC 2GND 10 | SPI |
| Macronix MX25L25645GM-08G Factory Mode (SOP-16) | Macronix | 16-Pin DIP / SOIC | 16 | VCC 2GND 10 | SPI |
All parts (16)
W25Q80DVSNIG 8Mbit Serial Flash Memory with Dual/Quad SPI
8M-bit serial flash memory with standard, dual and quad SPI interface in 8-pin SOIC 150-mil package (code SN).
W25Q32JV 32Mbit SPI NOR Flash Memory
3V, 32M-bit (4M-byte) Serial NOR Flash memory with dual/quad SPI, used for external firmware/data storage on ESP32, Arduino and FPGA boards.
W25Q64JVSSIQ 64Mbit Serial NOR Flash (SPI/Dual/Quad)
64Mbit serial NOR flash with Standard, Dual and Quad SPI interface, 8-pin SOIC 208-mil package.
Winbond W25Q128JWS (SOIC-8 / WSON-8)
1.8V 128M-bit (16M-byte) Serial NOR Flash memory with Dual/Quad SPI in 8-pin SOIC 208-mil and 8-pad WSON packages. Standard IQ series with factory-fixed Quad Enable (QE=1) and JEDEC ID 6018h.
Winbond W25Q128JW-IM (SOIC-8 / WSON-8)
1.8V 128M-bit (16M-byte) Serial NOR Flash memory in 8-pin SOIC and WSON packages. IM variant with programmable QE=0 default, active /HOLD or /RESET pin functionality on Pin 7, and JEDEC Device ID 8018h.
Winbond W25Q128JWF (SOIC-16)
1.8V 128M-bit (16M-byte) Serial NOR Flash memory with Dual/Quad SPI in 16-pin SOIC 300-mil package. Standard IQ series with factory-fixed Quad Enable (QE=1), dedicated hardware /RESET pin on Pin 3, and JEDEC ID 6018h.
Winbond W25Q128JWF-IM (SOIC-16)
1.8V 128M-bit (16M-byte) Serial NOR Flash memory in 16-pin SOIC 300-mil. IM variant with programmable QE=0 default, /HOLD or /RESET on Pin 1, dedicated hardware /RESET on Pin 3, and JEDEC Device ID 8018h.
Winbond W25Q256JW (WSON-8)
1.8V 256M-bit (32M-byte) Serial NOR Flash memory with Dual/Quad SPI in 8-pad WSON package (6x5mm / 8x6mm). Standard IQ series with factory-fixed Quad Enable (QE=1) and JEDEC ID 6019h.
Winbond W25Q256JW-IM (WSON-8)
1.8V 256M-bit (32M-byte) Serial NOR Flash memory with Dual/Quad SPI in 8-pad WSON package. Ordering option IM features programmable QE=0 default, active /HOLD or /RESET function on Pin 7, and JEDEC Device ID 8019h.
Winbond W25Q256JWF (SOIC-16)
1.8V 256M-bit (32M-byte) Serial NOR Flash memory with Dual/Quad SPI in 16-pin SOIC 300-mil package. Standard IQ series with factory-fixed Quad Enable (QE=1), dedicated hardware /RESET input (Pin 3), and JEDEC ID 6019h.
Winbond W25Q256JWF-IM (SOIC-16)
1.8V 256M-bit (32M-byte) Serial NOR Flash memory in 16-pin SOIC 300-mil. IM variant with programmable QE=0, /HOLD or /RESET on Pin 1, dedicated hardware /RESET on Pin 3, and JEDEC Device ID 8019h.
MX25L6433F Serial Flash Memory
64M-bit serial Flash memory with SPI, dual I/O and quad I/O support, +3.0V supply. Pin list from the 8-pin SOP (200mil) package in the datasheet.
Macronix MX25L25645G (SOP-8 / WSON-8)
3V 256M-bit (32M-byte) CMOS MXSMIO Multi-I/O Serial NOR Flash in 8-pin SOP 200-mil and 8-land WSON packages. Supports Single/Dual/Quad I/O, QPI, DTR mode up to 133MHz, JEDEC ID C2h 2019h.
Macronix MX25L25645G-08G Factory Mode (SOP-8 / WSON-8)
3V 256M-bit Serial NOR Flash in 8-pin SOP/WSON with Factory Mode Support (-08G). Features high-speed Factory Mode programming (0.16ms page program) and erase throughput, DTR mode up to 133MHz, JEDEC ID C2h 2019h.
Macronix MX25L25645G (SOP-16)
3V 256M-bit (32M-byte) CMOS MXSMIO Multi-I/O Serial NOR Flash in 16-pin SOP 300-mil package. Features a dedicated hardware RESET# input on Pin 3 and NC/SIO3 on Pin 1.
Macronix MX25L25645GM-08G Factory Mode (SOP-16)
3V 256M-bit (32M-byte) Serial NOR Flash in 16-pin SOP 300-mil with Factory Mode Support (-08G). Features dedicated RESET# (Pin 3), NC/SIO3 (Pin 1), and high-speed Factory Mode programming/erase.