MCP6002 1MHz Low-Power Rail-to-Rail Dual Op-Amp
1MHz, Low-Power Op Amp, DIP-8
Aliase:MCP6002, Microchip OpAmp
DIP-8 Top View
8 Pins
Pinout Table8
| Pin | Signal / Name | Type | Alternative Functions |
|---|---|---|---|
| 1 | OUT A | Analog | Amplifier Output, Channel A — rail-to-rail output; drives within 25mV of each supply rail |
| 2 | INA- | Analog | Inverting Input (-), Channel A |
| 3 | INA+ | Analog | Non-Inverting Input (+), Channel A — rail-to-rail input range (0V to VDD) |
| 4 | VSS | Ground | Negative Supply / Ground (0V for single-supply operation; +1.8V to +6.0V range) |
| 5 | INB+ | Analog | Non-Inverting Input (+), Channel B — rail-to-rail input range (0V to VDD) |
| 6 | INB- | Analog | Inverting Input (-), Channel B |
| 7 | OUT B | Analog | Amplifier Output, Channel B — rail-to-rail output; drives within 25mV of each supply rail |
| 8 | VDD | Power | Positive Supply Voltage (+1.8V to +6.0V; add 100nF bypass cap to VSS near pin) |