Bauteilfamilie

Operationsverstärker: Pinouts von LM358, TL072 und Co.

Einfach-, Doppel- und Vierfach-OPVs für Audio, Sensorik und Messtechnik.

Operationsverstärker (OPV, englisch Op-Amp) sind die Grundbausteine der Analogtechnik. Mit wenigen Widerständen werden aus ihnen Verstärker, Filter, Komparatoren, Integratoren und Impedanzwandler. Die Auswahl hängt von der Anwendung ab: Der LM358 läuft an einer einzigen Versorgung ab 3 V, der TL072 hat JFET-Eingänge mit sehr kleinem Eingangsstrom, NE5532 und OPA2134 sind rauscharme Audio-OPVs, der OP07 hat eine besonders kleine Offsetspannung, und MCP6002 oder OPA2340 schwingen bis an die Versorgungsgrenzen aus (Rail-to-Rail).

Die gute Nachricht: Die Pinbelegungen sind weitgehend genormt. Doppel-OPVs im 8-poligen Gehäuse haben Ausgang A an Pin 1, die Eingänge A an Pin 2 und 3, V− an Pin 4, die Eingänge B an Pin 5 und 6, Ausgang B an Pin 7 und V+ an Pin 8. Einfach-OPVs wie LM741, TL071 und OP07 legen V+ auf Pin 7 und nutzen zwei der übrigen Pins (1 und 5 oder 1 und 8) für den Offset-Abgleich. Vierfach-OPVs wie LM324 und TL074 haben V+ an Pin 4 und V− an Pin 11.

Damit lässt sich ein Doppel-OPV meist direkt gegen einen anderen tauschen. Die Tabelle zeigt Gehäuse und Versorgungspins aller Typen; prüfe trotzdem Versorgungsbereich und Ausgangshub im Datenblatt.

Übersicht aus den Pinout-Daten

8 von 17 Bauteilen haben GND an Pin 4 und die Versorgung an Pin 8.

BauteilHerstellerGehäusePinsVersorgung
LM741 General Purpose Operational AmplifierTexas Instruments8-Pin DIP / SOIC8VCC 7GND 4
LM358 Low-Power Dual Operational AmplifierTexas Instruments / ON Semi8-Pin DIP / SOIC8VCC 8GND 4
LM324 Low-Power Quad Operational AmplifierTexas Instruments14-Pin DIP / SOIC14VCC 4GND 11
TL071 Low-Noise JFET-Input General-Purpose Op-AmpTexas Instruments8-Pin DIP / SOIC8VCC 7GND 4
TL072 Low-Noise JFET-Input Dual Op-AmpTexas Instruments8-Pin DIP / SOIC8VCC 8GND 4
TL074 Low-Noise JFET-Input Quad Op-AmpTexas Instruments14-Pin DIP / SOIC14VCC 4GND 11
NE5532 Dual High-Performance Low-Noise Op-AmpSignetics / TI8-Pin DIP / SOIC8VCC 8GND 4
OP07 Ultra-Low Offset Voltage Operational AmplifierAnalog Devices / TI8-Pin DIP / SOIC8VCC 7GND 4
CA3140 4.5MHz BiMOS Operational Amplifier with MOSFET InputIntersil / Harris8-Pin DIP / SOIC8VCC 7GND 4
OPA2134 SoundPlus High Performance Audio Op-AmpBurr-Brown / TI8-Pin DIP / SOIC8VCC 8GND 4
OPA1612 Dual SoundPlus Audio Op AmpTexas Instruments8-Pin DIP / SOIC8VCC 8GND 4
OPA2340UA Dual Rail-to-Rail Operational AmplifierTexas Instruments8-Pin DIP / SOIC8VCC 8GND 4
MCP6002 1MHz Low-Power Rail-to-Rail Dual Op-AmpMicrochip Technology8-Pin DIP / SOIC8VCC 8GND 4
MCP6004 1MHz Low-Power Rail-to-Rail Quad Op-AmpMicrochip Technology14-Pin DIP / SOIC14VCC 4GND 11
TLV9062IDR Dual Op AmpTexas Instruments8-Pin DIP / SOIC8VCC 8GND 4
THS3001 420MHz High-Speed Current-Feedback AmplifierTexas Instruments8-Pin DIP / SOIC8–
THS4531A Ultra Low-Power Rail-to-Rail Output Fully Differential AmplifierTexas Instruments8-Pin DIP / SOIC8–

Alle Bauteile (17)

Chip
Texas Instruments

LM741 General Purpose Operational Amplifier

Operational Amplifier, DIP-8/TO-99-8

Chip
Texas Instruments / ON Semi

LM358 Low-Power Dual Operational Amplifier

Low-Power, Dual Operational Amplifiers, DIP-8/SOIC-8/TO-99-8

Chip
Texas Instruments

LM324 Low-Power Quad Operational Amplifier

Low-Power, Quad-Operational Amplifiers, DIP-14/SOIC-14/SSOP-14

Chip
Texas Instruments

TL071 Low-Noise JFET-Input General-Purpose Op-Amp

Single Low-Noise JFET-Input Operational Amplifiers, DIP-8/SOIC-8

Chip
Texas Instruments

TL072 Low-Noise JFET-Input Dual Op-Amp

Dual Low-Noise JFET-Input Operational Amplifiers, DIP-8/SOIC-8

Chip
Texas Instruments

TL074 Low-Noise JFET-Input Quad Op-Amp

Quad Low-Noise JFET-Input Operational Amplifiers, DIP-14/SOIC-14

Chip
Signetics / TI

NE5532 Dual High-Performance Low-Noise Op-Amp

Dual Low-Noise Operational Amplifiers, DIP-8/SOIC-8

Chip
Analog Devices / TI

OP07 Ultra-Low Offset Voltage Operational Amplifier

Very low input offset voltage (75µV max) operational amplifier with low drift and high open-loop gain (300V/mV), making it the classic standard for precision instrumentation.

Chip
Intersil / Harris

CA3140 4.5MHz BiMOS Operational Amplifier with MOSFET Input

BiMOS operational amplifier combining high-voltage PMOS transistors with high-voltage bipolar transistors on a single monolithic chip. Features 1.5 TΩ input impedance and rail-to-rail output swing.

Chip
Burr-Brown / TI

OPA2134 SoundPlus High Performance Audio Op-Amp

Dual SoundPlus High Performance Audio Operational Amplifiers, DIP-8/SOIC-8

Chip
Texas Instruments

OPA1612 Dual SoundPlus Audio Op Amp

Dual bipolar-input audio op amp. 1.1 nV/sqrt(Hz) noise at 1 kHz, 0.000015% THD+N at 1 kHz, 27 V/us slew rate, 40 MHz bandwidth at G=+1, +-2.25 V to +-18 V supply.

Chip
Texas Instruments

OPA2340UA Dual Rail-to-Rail Operational Amplifier

Dual single-supply rail-to-rail CMOS op amp. 5.5 MHz bandwidth, 6 V/us slew rate, 750 uA/channel quiescent current, 2.7 V to 5.5 V supply, -40 to 125 C specified range.

Chip
Microchip Technology

MCP6002 1MHz Low-Power Rail-to-Rail Dual Op-Amp

1MHz, Low-Power Op Amp, DIP-8

Chip
Microchip Technology

MCP6004 1MHz Low-Power Rail-to-Rail Quad Op-Amp

1MHz, Low-Power Op Amp, DIP-14/SOIC-14/TSSOP-14

Chip
Texas Instruments

TLV9062IDR Dual Op Amp

Dual operational amplifier, 8-pin SOIC (D) package, from the TLV9061/TLV9062/TLV9064 family. Pin assignments per datasheet SBOS839N Figure 5-6 and Table 5-3.

Chip
Texas Instruments

THS3001 420MHz High-Speed Current-Feedback Amplifier

High-speed current-feedback op amp: 420MHz bandwidth (G=1, -3dB), 6500V/us slew rate, 40ns settling to 0.1%, 100mA output drive, +/-4.5V to +/-16V supply, -96dBc THD at 1MHz.

Chip
Texas Instruments

THS4531A Ultra Low-Power Rail-to-Rail Output Fully Differential Amplifier

Ultra low-power (250 uA) fully differential amplifier with rail-to-rail output, negative rail input, 36 MHz bandwidth, 200 V/us slew rate, 2.5 V to 5.5 V single supply, and output common-mode control.