MCP6004 1MHz Low-Power Rail-to-Rail Quad Op-Amp
1MHz, Low-Power Op Amp, DIP-14/SOIC-14/TSSOP-14
Aliase:MCP6004, Quad Rail-to-Rail
DIP-14 Top View
14 Pins
Pin-Tabelle14
| Pin | Signal / Name | Typ | Alternative Funktionen |
|---|---|---|---|
| 1 | OUT A | Analog | Amplifier Output, Channel A — rail-to-rail output |
| 2 | INA- | Analog | Inverting Input (-), Channel A |
| 3 | INA+ | Analog | Non-Inverting Input (+), Channel A — rail-to-rail input range (0V to VDD) |
| 4 | VDD | Power | Positive Supply Voltage (+1.8V to +6.0V; add 100nF bypass cap to VSS near pin) |
| 5 | INB+ | Analog | Non-Inverting Input (+), Channel B |
| 6 | INB- | Analog | Inverting Input (-), Channel B |
| 7 | OUT B | Analog | Amplifier Output, Channel B — rail-to-rail output |
| 8 | OUT C | Analog | Amplifier Output, Channel C — rail-to-rail output |
| 9 | INC- | Analog | Inverting Input (-), Channel C |
| 10 | INC+ | Analog | Non-Inverting Input (+), Channel C |
| 11 | VSS | Ground | Negative Supply / Ground (0V for single-supply operation) |
| 12 | IND+ | Analog | Non-Inverting Input (+), Channel D |
| 13 | IND- | Analog | Inverting Input (-), Channel D |
| 14 | OUT D | Analog | Amplifier Output, Channel D — rail-to-rail output |