Texas Instruments: TI Part Pinouts
Timers, regulators, op-amps, logic, converters and interface chips from TI.
Dallas-based Texas Instruments is one of the largest makers of analog and digital semiconductors. Many electronics classics come from TI or are supplied mainly by TI today: the NE555 timer, the LM317 and LM7805 regulators, the LM358, LM324 and TL072 op-amps, the 74HC logic family and the CD4000 CMOS series that originally came from RCA. The acquisitions of National Semiconductor and Burr-Brown added the LM and OPA parts.
Modules built around TI chips are especially common in maker projects: the ADS1115 16-bit ADC, the INA219 and INA226 current and power monitors, the TCA9548A I2C multiplexer, the TXS0108E and TXB0104 level shifters and the DRV8825 stepper driver. The regulators range from linear types through TPS7A LDOs to switching regulators such as the TPS54331 and TPS63020.
Many of these parts are made by several manufacturers with an identical pinout. The table lists the package, supply pins and interfaces of every TI part in the database; the datasheet is linked on each part page.
Overview from the pinout data
All parts (81)
NE555 Precision Timer
The classic precision timing circuit capable of producing accurate time delays or oscillation in astable or monostable modes.
LM7805 Positive Voltage Regulator
Positive 1A 35V Linear Regulator, Fixed Output 5V, TO-220
LM317 Adjustable Positive Voltage Regulator
1.5A 35V Adjustable Linear Regulator, TO-220
LM358 Low-Power Dual Operational Amplifier
Low-Power, Dual Operational Amplifiers, DIP-8/SOIC-8/TO-99-8
LM741 General Purpose Operational Amplifier
Operational Amplifier, DIP-8/TO-99-8
LM324 Low-Power Quad Operational Amplifier
Low-Power, Quad-Operational Amplifiers, DIP-14/SOIC-14/SSOP-14
TL071 Low-Noise JFET-Input General-Purpose Op-Amp
Single Low-Noise JFET-Input Operational Amplifiers, DIP-8/SOIC-8
TL072 Low-Noise JFET-Input Dual Op-Amp
Dual Low-Noise JFET-Input Operational Amplifiers, DIP-8/SOIC-8
TL074 Low-Noise JFET-Input Quad Op-Amp
Quad Low-Noise JFET-Input Operational Amplifiers, DIP-14/SOIC-14
TL431 Adjustable Precision Shunt Regulator
Three-terminal programmable shunt regulator diode with temperature stability guaranteed over the full operating range. Output voltage can be set to any value between 2.5V and 36V with two external resistors.
TL494 Pulse-Width-Modulation Control Circuit
Fixed-frequency pulse-width-modulation (PWM) control circuit designed primarily for power supply control. Incorporates two error amplifiers, an on-chip adjustable oscillator, dead-time control (DTC) comparator, pulse-steering flip-flop, 5.0V precision regulator, and output control circuits.
LM393 Dual Differential Comparator
Low-Power, Low-Offset Voltage, Dual Comparators, DIP-8/SOIC-8/TO-99-8
LM339 Quad Differential Comparator
Quad Differential Comparators, DIP-14/SOIC-14/TSSOP-14
LM311 Voltage Comparator with Strobe
Voltage Comparator, DIP-8/SOIC-8
LM386 Low Voltage Audio Power Amplifier
Low Voltage Audio Power Amplifier, DIP-8/SOIC-8/SSOP-8
LM556 Dual Precision Timer
Dual Timer, DIP-14/SOIC-14
LM3914 Dot/Bar Display Driver
Monolithic IC that senses analog voltage levels and drives 10 LEDs in a linear dot or bar graph display. Internal voltage reference and precision voltage divider included.
LM35 Precision Centigrade Temperature Sensor (TO-92)
Precision centigrade temperature sensor, TO-92
LM2596 SIMPLE SWITCHER 3A Step-Down Voltage Regulator
3A step-down switching voltage regulator operating at 150 kHz switching frequency, widely available as TO-220-5 IC and adjustable DC-DC buck converter module.
LM2576 3A Step-Down Switching Voltage Regulator
3A step-down (buck) switching regulator operating at 52kHz. Provides high efficiency (up to 88%) with thermal shutdown, current limiting, and external on/off control.
LM2675M-5.0 Simple Switcher 1A Step-Down Voltage Regulator
1A step-down (buck) switching voltage regulator with internal high-side FET, 5.0 V fixed output option, boot-strap capacitor input, feedback pin, and ON/OFF enable. Supply range 6.5 V to 40 V.
LM2940IMP-5.0/NOPB 1-A Low Dropout Linear Regulator
1-A positive low dropout linear regulator, 6 V to 26 V input, typical dropout 0.5 V at 1 A, reverse battery protection, short circuit and thermal overload protection.
LP2950-3.3 Micropower Voltage Regulator
Positive 100mA 30V Linear Micropower Voltage Regulator, Fixed Output 3.3V, TO-92
TPS54331 3-A 28-V Step-Down DC-DC Converter
3-A, 28-V input non-synchronous buck converter with integrated 80-mOhm high-side MOSFET, fixed 570-kHz switching, Eco-mode pulse skipping, and adjustable slow-start.
TPS62160 Step-Down Converter
Synchronous step-down converter, 3-17 V input, 0.9-6 V adjustable output, power good output, 8-pin WSON with exposed thermal pad (DSG package).
TPS63020 Buck-Boost Converter
Buck-boost DC-DC converter, 1.8 V to 5.5 V supply at VIN/VINA, power save mode and sync input, power good output, 14-pin VSON with exposed thermal pad.
TPS7A2033PDBVR Low-dropout linear voltage regulator
Low-dropout linear regulator with enable input. SOT-23-5 (DBV) package. IN supply, OUT regulated output, EN active-high enable with internal 500k ohm pulldown, GND common ground.
MC34063A Universal DC-DC Converter Controller
Monolithic DC-DC converter control circuit containing an internal temperature compensated reference, comparator, duty cycle controlled oscillator with active peak current limit circuit, driver and high current output switch (1.5A peak). Capable of Step-Up (Boost), Step-Down (Buck), and Inverting operation.
74HC00 Quad 2-Input NAND Gate
Quad 2-input NAND gate in high-speed CMOS logic. 2–6V supply. Each gate output is the inverted AND of its two inputs. Pin-compatible with 74LS00 and CD4011B.
74HC04 Hex Inverter
Six independent single-input inverter gates in high-speed CMOS logic. 2–6V supply. Each gate output is the logic complement of its input. Pin-compatible with 74LS04.
74HC08 Quad 2-Input AND Gate
High-speed CMOS quad 2-input AND gate. Pin-compatible upgrade to 74LS08 with lower power consumption and wider voltage range (2V to 6V).
74HC14 Hex Inverting Schmitt Trigger
Six independent Schmitt-trigger inverters in high-speed CMOS. 2–6V supply. Same pin-out as 74HC04 but with hysteresis on each input, making it suitable for noisy or slow-rising signals and oscillator circuits.
74HC74 Dual D-Type Positive-Edge-Triggered Flip-Flop
Dual positive-edge-triggered D-type flip-flop with asynchronous individual set (~PRE) and clear (~CLR) inputs and complementary Q and ~Q outputs.
74HC138 3-to-8 Line Decoder / Demultiplexer
3-to-8 line decoder with active-low outputs. Three enable inputs (two active-low ~G2A/~G2B, one active-high G1) allow easy cascading. Complement of 74HC238 (active-high outputs).
74HC165 8-Bit Parallel-In / Serial-Out Shift Register
8-bit parallel-load shift register. Pull ~PL LOW to latch parallel inputs D0–D7; then clock out serially via Q7 (or its complement ~Q7). ~CE (clock enable, Active Low) gates the clock. Commonly chained for reading multiple buttons or sensors over SPI.
74HC595 8-Bit Serial-In / Parallel-Out Shift Register
8-bit serial-input / parallel-output shift register with 3-state outputs. Data is clocked in serially on SRCLK, then latched to the output pins on a rising edge of RCLK. Commonly chained for expanding digital outputs over SPI.
74HC245 Octal Bus Transceiver with 3-State Outputs
Octal bidirectional bus transceiver with 3-state outputs. DIR controls data direction (HIGH = A→B, LOW = B→A). ~OE (Active Low) disables all outputs to high-impedance. Widely used for 3.3V↔5V level translation.
74HC4051 8-Channel Analog Multiplexer / Demultiplexer
Single 8-channel bidirectional analog switch (multiplexer/demultiplexer). Address pins S0/S1/S2 select one of 8 channels (Y0–Y7) to connect to the common I/O (Z). ~E disables all switches. VEE allows bipolar analog signals; tie to GND for 0–5V operation.
CD74HC4067 16-Channel Analog Multiplexer/Demultiplexer
High-speed CMOS 16-channel analog multiplexer/demultiplexer with low on-resistance (typ. 70 Ohm) and wide analog voltage range. Ideal for data acquisition and signal routing.
CD4001B CMOS Quad 2-Input NOR Gate
Standard CMOS quad 2-input NOR gate with buffered outputs. Wide supply voltage range from 3V to 18V with high noise immunity.
CD4011B Quad 2-Input NAND Gate
Quad 2-input NAND gate in CMOS logic. 3–18V supply. Each gate output is the inverted AND of its two inputs. Pin-compatible with 74HC00.
CD4017B Decade Counter with 10 Decoded Outputs
5-stage Johnson counter with 10 decoded outputs. Advances on rising clock edge. 3–18V supply. Used in LED chasers, sequencers, and frequency dividers.
CD4013B CMOS Dual D-Type Flip-Flop
High-voltage CMOS dual D-type static flip-flop with independent Set, Reset, Clock, and Data inputs operating over a 3V to 18V supply range.
CD4040B CMOS 12-Stage Binary Ripple Counter
12-stage binary ripple counter with master reset. Advances one count on the negative-going transition of each clock pulse. Common for frequency dividers and timers.
CD4046B CMOS Micropower Phase-Locked Loop (PLL)
Micropower phase-locked loop consisting of a linear voltage-controlled oscillator (VCO) and two different phase comparators with common signal-input and comparator-input.
CD4060B CMOS 14-Stage Binary Ripple Counter with Oscillator
14-stage ripple-carry binary counter/divider and oscillator with built-in RC/crystal oscillator section, capable of high-ratio frequency division and long timing delays.
CD4093B Quad 2-Input NAND Schmitt Trigger
CMOS logic integrated circuit consisting of four independent 2-input NAND gates with Schmitt-trigger action on both inputs. Ideal for waveform shaping, noise elimination, astable multivibrators, and monostable pulse generators with wide 3V to 18V operation.
ADS1115 16-Bit 4-Channel Precision ADC Module
Ultra-small, low-power 16-bit precision Analog-to-Digital Converter with internal reference, oscillator, programmable gain amplifier (PGA), and I2C interface.
ADS1220 24-bit 2-kSPS 4-channel delta-sigma ADC with PGA
24-bit, 2 kSPS, 4-channel delta-sigma ADC with low-noise PGA (gain up to 128), SPI interface, excitation current sources, temperature sensor and internal/external clock.
ADS131M04 4-Channel Delta-Sigma ADC
4-channel analog-to-digital converter with differential analog inputs, serial data interface (SCLK, DIN, DOUT, CS, DRDY), master clock input, and on-chip digital LDO.
ADC0804 8-Bit Microprocessor Compatible A/D Converter
8-bit successive approximation analog-to-digital converter designed to interface directly with microprocessor buses via tri-state outputs and control strobes (~RD, ~WR).
DAC0808 8-Bit Multiplying D/A Converter
Classic 8-bit monolithic digital-to-analog converter featuring high speed multiplying capability (150ns settling time) and direct interface with TTL, DTL, and CMOS logic.
DAC8563SDGSR Dual 16-Bit Buffered Voltage-Output DAC
Dual-channel 16-bit low-power buffered voltage-output DAC with 2.5-V 4-ppm/C internal reference, 50-MHz three-wire SPI interface, rail-to-rail output, 2.7 V to 5.5 V supply.
INA219 High-Side Current & Power Sensor Module
Bidirectional current and power monitor with I2C-compatible interface, capable of measuring high-side voltages up to +26V and currents up to 3.2A with 0.1 ohm shunt.
INA226 Precision Current/Power Monitor
Bidirectional current, voltage, and power monitor with I2C/SMBus interface and a programmable alert pin, offering higher resolution and accuracy than the popular INA219.
INA3221AIRGVR Triple-Channel Current and Bus Voltage Monitor
Three-channel high-side current and bus voltage monitor with I2C/SMBus interface, 13-bit ADC, 0-26V bus range, 2.7-5.5V supply, critical/warning/PV/TC alert outputs, -40 to +125 C.
INA128UA Precision Instrumentation Amplifier
Precision low-power instrumentation amplifier with 50uV max offset, 0.5uV/C max drift, 120dB min CMR, gain 1 to 10000 set by external RG, supply +/-2.25V to +/-18V.
INA333 Micro-Power Zero-Drift Rail-to-Rail Instrumentation Amplifier
Micro-power (50 uA) zero-drift rail-to-rail instrumentation amplifier, 1.8 V to 5.5 V supply, gain 1 to 1000 set by external RG (G = 1 + 100k/RG), RFI filtered inputs.
OPA2134 SoundPlus High Performance Audio Op-Amp
Dual SoundPlus High Performance Audio Operational Amplifiers, DIP-8/SOIC-8
OPA1612 Dual SoundPlus Audio Op Amp
Dual bipolar-input audio op amp. 1.1 nV/sqrt(Hz) noise at 1 kHz, 0.000015% THD+N at 1 kHz, 27 V/us slew rate, 40 MHz bandwidth at G=+1, +-2.25 V to +-18 V supply.
OPA2340UA Dual Rail-to-Rail Operational Amplifier
Dual single-supply rail-to-rail CMOS op amp. 5.5 MHz bandwidth, 6 V/us slew rate, 750 uA/channel quiescent current, 2.7 V to 5.5 V supply, -40 to 125 C specified range.
TLV9062IDR Dual Op Amp
Dual operational amplifier, 8-pin SOIC (D) package, from the TLV9061/TLV9062/TLV9064 family. Pin assignments per datasheet SBOS839N Figure 5-6 and Table 5-3.
THS3001 420MHz High-Speed Current-Feedback Amplifier
High-speed current-feedback op amp: 420MHz bandwidth (G=1, -3dB), 6500V/us slew rate, 40ns settling to 0.1%, 100mA output drive, +/-4.5V to +/-16V supply, -96dBc THD at 1MHz.
THS4531A Ultra Low-Power Rail-to-Rail Output Fully Differential Amplifier
Ultra low-power (250 uA) fully differential amplifier with rail-to-rail output, negative rail input, 36 MHz bandwidth, 200 V/us slew rate, 2.5 V to 5.5 V single supply, and output common-mode control.
MAX3232 3.0V-5.5V Dual RS-232 Transceiver
Two-channel line driver and receiver with ±15-kV ESD protection and internal charge pump for 3.0V to 5.5V operation. Meets EIA/TIA-232-F standards while operating directly from 3.3V microcontroller logic without external high voltage supplies.
SN65HVD230 CAN Transceiver
3.3V CAN transceiver with RS mode select (high speed, low power, slope control) and VCC/2 Vref output. Pin 5 and 8 differ on HVD232 (NC).
ISO1050 isolated CAN transceiver
Isolated CAN transceiver with digital-side VCC1 (3 to 5.5 V) and transceiver-side VCC2 (5 V), CAN bus lines CANH/CANL, and separate GND1/GND2 references. DUB 8-pin package.
TXS0108E 8-Bit Bidirectional Voltage-Level Translator
8-bit non-inverting bidirectional logic voltage level translator with automatic direction sensing and output enable (OE). Allows seamless communication between mixed-voltage systems (e.g. 1.8V/3.3V microcontrollers and 5V sensors/peripherals) across high-speed I2C, SPI, and UART buses.
TXB0104PWR 4-bit bidirectional voltage-level translator
4-bit bidirectional voltage-level translator with VCCA (1.2 V to 3.6 V) and VCCB (1.65 V to 5.5 V) supplies, OE tri-state enable. TSSOP-14 (PW) package.
SN74LVC8T245PWR 8-bit Dual-Supply Bus Transceiver
8-bit noninverting dual-supply bus transceiver with direction control and output enable. VCCA and VCCB 1.65V to 5.5V. 3-state outputs.
TCA9548A 8-Channel I2C Multiplexer
8-channel bidirectional I2C/SMBus switch with reset, used to resolve address conflicts between identical I2C sensor breakouts by isolating each device on its own sub-bus.
TCA9534 8-bit I2C-bus and SMBus I/O expander
Low-voltage 8-bit I2C/SMBus I/O expander with interrupt output, 3 address pins and push-pull P-port I/O, 16-pin TSSOP package.
TLC5940 16-Channel LED Driver with Dot Correction
16-channel constant-current LED driver with 12-bit PWM grayscale control and 6-bit dot correction per channel. Supports daisy-chaining via serial interface for large LED arrays.
TLC59116 16-Channel FM+ I2C-Bus Constant-Current LED Sink Driver
16-channel I2C LED sink driver, 97-kHz 8-bit PWM per output, 190-Hz group PWM, 5-120 mA constant current set by REXT, 17 V output tolerance, 3-5.5 V supply.
LP5009 9-channel I2C RGB LED driver
9-channel constant-current sink LED driver with 12-bit 29-kHz PWM per channel, I2C interface, VCC 2.7-5.5 V, up to 35 mA per channel, integrated color mixing and brightness control.
DRV8825 Stepper Motor Controller (StepStick)
High-current microstepping bipolar stepper driver with built-in indexing translator, supporting up to 2.5A peak per coil, 45V motor supply, and 1/32 microstepping.
L293D Quadruple Half-H Drivers with Internal Flyback Diodes
Quadruple Half-H motor driver IC with internal flyback protection diodes, providing four independently controlled half-bridge outputs rated 600mA each. The D suffix indicates built-in suppression diodes, no external diodes needed for inductive loads.
SN754410 Quadruple Half-H Motor Driver
Quadruple high-current half-H driver designed to provide bidirectional drive currents of up to 1A at voltages from 4.5V to 36V. Pin-compatible higher-current modern alternative to the popular L293D with internal output clamp diodes for inductive transient suppression.
ULN2003A High-Voltage High-Current Darlington Transistor Array
High Voltage, High Current Darlington Transistor Arrays, SOIC16/SOIC16W/DIP16/TSSOP16
BQ24074 LiPo Charger with Power Path Management
Single-cell Li-Ion/LiPo linear charger with autonomous power-path management, allowing the system to run directly from USB/DC input while simultaneously charging the battery.
BQ25895RTWR I2C Single-Cell Li-Ion Battery Charger with Boost
I2C-controlled single-cell Li-ion charger with USB input, MaxCharge D+/D- adapter support, ICO, and 4.5-5.5 V battery boost on PMID up to 3.1 A. WQFN-24 with PowerPAD.