Manufacturer

Espressif: ESP32 and ESP8266 Pinouts

Wi-Fi and Bluetooth microcontrollers as development boards, modules and bare chips.

Shanghai-based Espressif Systems made Wi-Fi affordable for hobby projects with the ESP8266 in 2014. Its successor, the ESP32, added a second core, Bluetooth and many peripherals, and is now one of the most widely used microcontrollers for connected devices. Several families exist today: the ESP32-S2 and S3 with native USB, the S3 also with vector instructions for AI workloads, and the ESP32-C3 and C6 with a RISC-V core, the C6 adding Wi-Fi 6, Thread and Zigbee.

This page lists both boards and chips. For breadboard projects the boards matter: ESP32 DevKit V1, ESP32-S3 DevKitC-1, NodeMCU with the ESP8266, the tiny ESP-01 and the XIAO ESP32-C3. Anyone designing their own PCB needs the pinouts of the chips themselves.

On the ESP32, keep an eye on the strapping pins: GPIO0, GPIO2, GPIO12 and GPIO15 set the boot mode and flash voltage at startup and should not be wired arbitrarily. GPIOs 6 to 11 connect to the internal flash on the classic ESP32. The table lists the package and interfaces of every Espressif part.

Overview from the pinout data

PartPackagePinsSupplyInterfaces
ESP32 DevKit V1 (38-Pin)Board38VCC 1, 19GND 14, 20, 26ADCDACI2CSPIUART
ESP32-S3 DevKitC-1 (44-Pin)Board44VCC 1, 2, 21GND 22, 23, 43ADCSPIUART
NodeMCU V2 (ESP8266 / ESP-12E)Board30VCC 11, 15, 21GND 10, 14, 22ADCI2CSPIUART
ESP8266 ESP-01 / ESP-01S Wi-Fi ModuleHeader8VCC 8GND 1UART
Seeed Studio XIAO ESP32-C3 Development BoardBoard14VCC 1, 3GND 2ADCI2CSPIUART
ESP32-D0WD-V3 Wi-Fi/BT SoCQFP / QFN48VCC 1, 3, 4–
ESP32-S2FH4 Wi-Fi MCUQFP / QFN57VCC 1, 3, 4GND 57–
ESP32-S3FN8 Wi-Fi/BLE SoCQFP / QFN57VCC 2, 3, 20GND 57–
ESP32-C3FH4 Wi-Fi/BLE SoCQFP / QFN33VCC 2, 3, 11GND 33–
ESP32-C6FH4 Wi-Fi 6 BLE SoCQFP / QFN41VCC 2, 3, 5GND 41–

All parts (10)

Board
Espressif Systems

ESP32 DevKit V1 (38-Pin)

Widely used 2.4 GHz Wi-Fi and Bluetooth development board powered by the dual-core Tensilica Xtensa 32-bit LX6 microprocessor with 38 total pins.

Board
Espressif Systems

ESP32-S3 DevKitC-1 (44-Pin)

Next-generation 2.4 GHz Wi-Fi and Bluetooth 5 (LE) development board powered by the dual-core Xtensa 32-bit LX7 microprocessor with AI vector instructions and USB-OTG.

Board
Espressif Systems

NodeMCU V2 (ESP8266 / ESP-12E)

Popular Wi-Fi development board powered by the ESP8266 32-bit Tensilica L106 microcontroller running at 80/160 MHz, with integrated USB-UART, 4MB Flash, and 30 breadboard-friendly pins.

Module
Espressif Systems / Ai-Thinker

ESP8266 ESP-01 / ESP-01S Wi-Fi Module

Ultra-compact 2.4 GHz Wi-Fi module with integrated TCP/IP stack, 32-bit Tensilica MCU, and 2x4 (8-pin) 2.54mm pitch header.

Board
Seeed Studio / Espressif

Seeed Studio XIAO ESP32-C3 Development Board

Thumb-sized (21 x 17.5 mm) IoT development board powered by the Espressif ESP32-C3 32-bit RISC-V single-core processor at up to 160 MHz. Features 2.4GHz Wi-Fi 4, Bluetooth 5.0 (BLE), integrated battery charging management, USB-C, and 14 breadboard-friendly GPIO pins.

Chip
Espressif

ESP32-D0WD-V3 Wi-Fi/BT SoC

Espressif ESP32 dual-core Wi-Fi/Bluetooth SoC in QFN48 5x5mm. Provides GPIO matrix, ADC, DAC, touch, SD/SDIO, Ethernet MAC, UART and SPI/I2S pins.

Chip
Espressif

ESP32-S2FH4 Wi-Fi MCU

ESP32-S2 series Wi-Fi MCU in QFN56 7x7mm: GPIO matrix, ADC, DAC, touch, USB OTG, SPI, UART, I2C, I2S, TWAI, LEDC, JTAG. Exposed ground pad 57.

Chip
Espressif

ESP32-S3FN8 Wi-Fi/BLE SoC

ESP32-S3 dual-core Wi-Fi and Bluetooth LE SoC with GPIO matrix, IO MUX, RTC IO, SPI flash interface, USB and JTAG, in QFN56 7x7mm package.

Chip
Espressif

ESP32-C3FH4 Wi-Fi/BLE SoC

RISC-V Wi-Fi and Bluetooth LE SoC with in-package flash. QFN32 5x5mm pinout with IO MUX (F0-F2) and GPIO Matrix peripheral routing.

Chip
Espressif

ESP32-C6FH4 Wi-Fi 6 BLE SoC

ESP32-C6 series Wi-Fi 6, Bluetooth LE and 802.15.4 SoC. QFN40 5x5mm pinout with IO MUX, GPIO matrix and peripheral pin assignment.