Analog Devices & Maxim: MAX, DS and LT Chip Pinouts
Interface chips, real-time clocks, sensors, converters and precision analog parts.
Massachusetts-based Analog Devices specialises in precision analog and signal processing. Through the acquisitions of Linear Technology (2017) and Maxim Integrated (2021), the LT and LTC regulators as well as the MAX and DS parts now belong to ADI. This page therefore lists chips that many people still know under their old manufacturer name.
The former Maxim and Dallas types are especially common in maker projects: the MAX232 RS-232 level shifter, the MAX485 RS-485 transceiver, the MAX7219 LED driver for 7-segment displays and matrices, the MAX31855 and MAX6675 thermocouple converters, the DS1307 and DS3231 real-time clocks and the DS18B20 1-Wire temperature sensor. The classic ADI range contributes the OP07 precision op-amp, the AD8421 instrumentation amplifier, converters such as the AD7685 and AD5693R and the ADuM digital isolators.
The LT3045 is among the lowest-noise LDOs available, and the LT3080 can be paralleled and adjusted down to 0 V. The table lists the package, supply pins and interfaces of every part; the datasheet is linked on each part page.
Overview from the pinout data
All parts (24)
MAX232 Dual EIA-232 Driver/Receiver with Charge Pump
Dual RS232 driver/receiver, 5V supply, 120kb/s, 0C-70C
MAX485 Low-Power RS-485 / RS-422 Transceiver
Low-power transceiver for RS-485 and RS-422 communication with one driver and one receiver, supporting data rates up to 2.5 Mbps over differential balanced lines.
MAX7219 8-Digit LED Display Driver
Compact, serial input/output common-cathode display driver interfacing microprocessors to 7-segment numeric LED displays up to 8 digits, bar-graph displays, or 64 individual LEDs.
MAX31855 Cold-Junction Compensated Thermocouple-to-Digital Converter
Precision thermocouple-to-digital converter with a built-in 14-bit analog-to-digital converter (ADC) and cold-junction compensation. Resolves temperatures from -270°C to +1800°C with 0.25°C resolution via a read-only SPI-compatible interface.
MAX6675 K-Thermocouple-to-Digital Converter
Cold-junction-compensated K-thermocouple-to-digital converter with 12-bit SPI read-only output resolving temperatures from 0°C to +1024°C with 0.25°C resolution.
MAX98357A I2S Class-D Mono Amplifier
3W Class-D mono audio amplifier with a digital I2S/PDM input and integrated DAC, requiring no analog audio input, commonly paired with the ESP32/Raspberry Pi for I2S speaker output.
MAX17055 1-Cell Fuel Gauge with ModelGauge m5 EZ
7uA 1-cell battery fuel gauge with ModelGauge m5 EZ algorithm, I2C/SMBus-style 2-wire serial interface, ALRT open-drain alert, thermistor bias input and Kelvin sense resistor pins.
DS1307 64 x 8 Serial Real-Time Clock (I2C)
64 x 8, Serial, I2C Real-time clock, 4.5V to 5.5V VCC, 0°C to +70°C, DIP-8
DS3231 Extremely Accurate I2C Integrated RTC/TCXO/Crystal
Extremely Accurate I2C-Integrated RTC/TCXO/Crystal SOIC-16
DS1302 Trickle-Charge Timekeeping RTC
Trickle-charge timekeeping chip containing a real-time clock/calendar and 31 bytes of static RAM. Communicates with microprocessors via a simple 3-wire SPI-like synchronous serial interface (CE, SCLK, I/O) and operates down to 2.0V.
DS18B20 Programmable Resolution 1-Wire Digital Thermometer
Programmable Resolution 1-Wire Digital Thermometer TO-92
OP07 Ultra-Low Offset Voltage Operational Amplifier
Very low input offset voltage (75µV max) operational amplifier with low drift and high open-loop gain (300V/mV), making it the classic standard for precision instrumentation.
AD8421 Gain-Set Differential Amplifier
Amplifier with RG gain-set terminals, G = 1 + (9.9 kOhm / RG), REF terminal for output level shift, +VS/-VS supplies. Shown in 8-lead SOIC, MSOP and LFCSP packages.
AD7685 16-bit SAR ADC
16-bit SAR ADC with pseudo-differential analog input (IN+/IN-), external reference REF, and serial interface (CNV, SCK, SDI, SDO). VIO sets the digital interface supply.
AD7173-8 Analog-to-Digital Converter
Multichannel sigma-delta ADC with 16 analog inputs, cross point mux, internal 2.5 V reference, serial interface (SCLK, DIN, DOUT/RDY, ~CS), AVDD1/AVDD2/IOVDD supplies, exposed pad to AVSS.
AD5693R I2C Voltage-Output DAC
Rail-to-rail voltage-output DAC with I2C serial interface, 2.7 V to 5.5 V supply, VLOGIC digital supply option, and internal reference output on VREF. 10-lead MSOP pinout.
ADG1408 8:1 analog multiplexer
ADG1408 8-channel analog multiplexer, single drain D, 3-bit address A0-A2 with active high enable EN, dual or single supply operation (VSS/VDD).
ADM3053 Isolated CAN Transceiver
Isolated CAN transceiver with iCoupler data isolation and isoPower isolated DC-DC supply. Slope control on RS; standby when RS is high. 20 pins.
ADuM1200/ADuM1201 Digital Isolator
Dual-channel digital isolator with reinforced insulation rated 560 VPEAK per IEC 60747-17. Ambient range -40C to +105C, or -40C to +125C for W automotive grades.
LT3045 Ultralow Noise 500mA LDO Regulator
Ultralow noise, high PSRR 500mA linear regulator with programmable output via SET pin, current limit via ILIM, power good via PG/PGFB, and EN/UV enable. Input 2V to 20V, output 0V to 15V.
LT3080 Linear Regulator
Linear regulator with VCONTROL, IN, OUT and SET pins. Absolute max 40V on VCONTROL and IN, Tjmax 125C, indefinite output short-circuit duration. Pin 9 exposed pad is OUT.
LTC3622 Dual Step-Down Regulator
Dual synchronous step-down DC/DC regulator with Burst Mode/pulse-skip control, external sync, 180 degree phase select, programmable current limit, and INTVCC LDO. 14-lead DFN.
TMP36 Low Voltage Precision Analog Temperature Sensor
Low Voltage Temperature Sensor, SOIC-8
TMC2209 SilentStepStick Stepper Motor Driver
Ultra-silent motor driver IC for two-phase stepper motors with StealthChop2, SpreadCycle, CoolStep, StallGuard4 sensorless homing, and UART single-wire tuning.