Hersteller

Espressif: Pinouts von ESP32 und ESP8266

WLAN- und Bluetooth-Mikrocontroller als Entwicklungsboard, Modul und nackter Chip.

Espressif Systems aus Shanghai hat mit dem ESP8266 im Jahr 2014 WLAN für Bastelprojekte erschwinglich gemacht. Der Nachfolger ESP32 ergänzte einen zweiten Prozessorkern, Bluetooth und viele Peripherie-Einheiten und ist heute einer der meistgenutzten Mikrocontroller für vernetzte Geräte. Inzwischen gibt es mehrere Familien: ESP32-S2 und S3 mit nativem USB, ESP32-S3 zusätzlich mit Vektorbefehlen für KI-Anwendungen, ESP32-C3 und C6 mit RISC-V-Kern, der C6 mit WLAN 6, Thread und Zigbee.

Auf dieser Seite stehen sowohl Boards als auch Chips. Für Projekte auf dem Steckbrett sind die Boards wichtig: ESP32 DevKit V1, ESP32-S3 DevKitC-1, NodeMCU mit ESP8266, das kleine ESP-01 und das XIAO ESP32-C3. Wer eine eigene Platine entwirft, braucht die Pinouts der Chips selbst.

Beim ESP32 lohnt der Blick auf die Strapping-Pins: GPIO0, GPIO2, GPIO12 und GPIO15 bestimmen beim Start Bootmodus und Flash-Spannung und sollten nicht beliebig beschaltet werden. Die GPIOs 6 bis 11 sind beim klassischen ESP32 mit dem internen Flash verbunden. Die Tabelle zeigt Gehäuse und Schnittstellen aller Espressif-Bauteile.

Übersicht aus den Pinout-Daten

BauteilGehäusePinsVersorgungSchnittstellen
ESP32 DevKit V1 (38-Pin)Board38VCC 1, 19GND 14, 20, 26ADCDACI2CSPIUART
ESP32-S3 DevKitC-1 (44-Pin)Board44VCC 1, 2, 21GND 22, 23, 43ADCSPIUART
NodeMCU V2 (ESP8266 / ESP-12E)Board30VCC 11, 15, 21GND 10, 14, 22ADCI2CSPIUART
ESP8266 ESP-01 / ESP-01S Wi-Fi ModuleHeader8VCC 8GND 1UART
Seeed Studio XIAO ESP32-C3 Development BoardBoard14VCC 1, 3GND 2ADCI2CSPIUART
ESP32-D0WD-V3 Wi-Fi/BT SoCQFP / QFN48VCC 1, 3, 4–
ESP32-S2FH4 Wi-Fi MCUQFP / QFN57VCC 1, 3, 4GND 57–
ESP32-S3FN8 Wi-Fi/BLE SoCQFP / QFN57VCC 2, 3, 20GND 57–
ESP32-C3FH4 Wi-Fi/BLE SoCQFP / QFN33VCC 2, 3, 11GND 33–
ESP32-C6FH4 Wi-Fi 6 BLE SoCQFP / QFN41VCC 2, 3, 5GND 41–

Alle Bauteile (10)

Board
Espressif Systems

ESP32 DevKit V1 (38-Pin)

Widely used 2.4 GHz Wi-Fi and Bluetooth development board powered by the dual-core Tensilica Xtensa 32-bit LX6 microprocessor with 38 total pins.

Board
Espressif Systems

ESP32-S3 DevKitC-1 (44-Pin)

Next-generation 2.4 GHz Wi-Fi and Bluetooth 5 (LE) development board powered by the dual-core Xtensa 32-bit LX7 microprocessor with AI vector instructions and USB-OTG.

Board
Espressif Systems

NodeMCU V2 (ESP8266 / ESP-12E)

Popular Wi-Fi development board powered by the ESP8266 32-bit Tensilica L106 microcontroller running at 80/160 MHz, with integrated USB-UART, 4MB Flash, and 30 breadboard-friendly pins.

Module
Espressif Systems / Ai-Thinker

ESP8266 ESP-01 / ESP-01S Wi-Fi Module

Ultra-compact 2.4 GHz Wi-Fi module with integrated TCP/IP stack, 32-bit Tensilica MCU, and 2x4 (8-pin) 2.54mm pitch header.

Board
Seeed Studio / Espressif

Seeed Studio XIAO ESP32-C3 Development Board

Thumb-sized (21 x 17.5 mm) IoT development board powered by the Espressif ESP32-C3 32-bit RISC-V single-core processor at up to 160 MHz. Features 2.4GHz Wi-Fi 4, Bluetooth 5.0 (BLE), integrated battery charging management, USB-C, and 14 breadboard-friendly GPIO pins.

Chip
Espressif

ESP32-D0WD-V3 Wi-Fi/BT SoC

Espressif ESP32 dual-core Wi-Fi/Bluetooth SoC in QFN48 5x5mm. Provides GPIO matrix, ADC, DAC, touch, SD/SDIO, Ethernet MAC, UART and SPI/I2S pins.

Chip
Espressif

ESP32-S2FH4 Wi-Fi MCU

ESP32-S2 series Wi-Fi MCU in QFN56 7x7mm: GPIO matrix, ADC, DAC, touch, USB OTG, SPI, UART, I2C, I2S, TWAI, LEDC, JTAG. Exposed ground pad 57.

Chip
Espressif

ESP32-S3FN8 Wi-Fi/BLE SoC

ESP32-S3 dual-core Wi-Fi and Bluetooth LE SoC with GPIO matrix, IO MUX, RTC IO, SPI flash interface, USB and JTAG, in QFN56 7x7mm package.

Chip
Espressif

ESP32-C3FH4 Wi-Fi/BLE SoC

RISC-V Wi-Fi and Bluetooth LE SoC with in-package flash. QFN32 5x5mm pinout with IO MUX (F0-F2) and GPIO Matrix peripheral routing.

Chip
Espressif

ESP32-C6FH4 Wi-Fi 6 BLE SoC

ESP32-C6 series Wi-Fi 6, Bluetooth LE and 802.15.4 SoC. QFN40 5x5mm pinout with IO MUX, GPIO matrix and peripheral pin assignment.