The Interactive Database for
Pinouts & Hardware Diagrams.
Interactive diagrams, pin functions and links to technical datasheets for microcontrollers, dev boards, and ICs at a glance.
All Boards, Chips & Connectors
Development platforms, microcontrollers, ICs and standard interfaces
74HC4052 Dual 4-Channel Analog Multiplexer / Demultiplexer
Dual 4-channel analog multiplexer/demultiplexer with common channel select logic and active-low enable. Supports bidirectional signal routing of digital and analog voltages up to 10V with low ON resistance and break-before-make switching.
74HC4053 Triple 2-Channel Analog Multiplexer / Demultiplexer
Triple 2-channel analog multiplexer/demultiplexer (three independent SPDT analog switches) with three separate digital select inputs and a common enable input. Designed for analog and digital signal switching up to 10V peak-to-peak.
74HC151 8-Input Data Selector / Multiplexer
High-speed silicon-gate CMOS 8-channel data selector/multiplexer. Decodes 3 binary address inputs (S0, S1, S2) to select one of eight data sources (D0 through D7) with complementary true (Y) and inverted (~W) outputs.
JST-XH 4-Pin 2.54mm Wire-to-Board Connector
Standard 4-pin 2.54mm (0.1 inch) pitch wire-to-board polarized disconnectable connector. Universally utilized for 3D printer stepper motor wiring, endstops, I2C/UART interconnect cables, and 3S LiPo battery balancing ports with a 3A current rating.
TL494 Pulse-Width-Modulation Control Circuit
Fixed-frequency pulse-width-modulation (PWM) control circuit designed primarily for power supply control. Incorporates two error amplifiers, an on-chip adjustable oscillator, dead-time control (DTC) comparator, pulse-steering flip-flop, 5.0V precision regulator, and output control circuits.
CD4026B Decade Counter with 7-Segment Output
5-stage Johnson decade counter and an output decoder that converts Johnson code to 7-segment decoded outputs (a through g) capable of driving common-cathode numeric LED displays directly without external decoders.
DS1302 Trickle-Charge Timekeeping RTC
Trickle-charge timekeeping chip containing a real-time clock/calendar and 31 bytes of static RAM. Communicates with microprocessors via a simple 3-wire SPI-like synchronous serial interface (CE, SCLK, I/O) and operates down to 2.0V.
MAX31855 Cold-Junction Compensated Thermocouple-to-Digital Converter
Precision thermocouple-to-digital converter with a built-in 14-bit analog-to-digital converter (ADC) and cold-junction compensation. Resolves temperatures from -270°C to +1800°C with 0.25°C resolution via a read-only SPI-compatible interface.
2N7000 60V 200mA N-Channel Enhancement Mode MOSFET
N-channel enhancement mode field-effect transistor produced using high cell density, DMOS technology. Ideal for low-voltage, low-current switching applications such as small servo motor controls and power MOSFET gate drivers.
ATmega16 40-Pin 8-Bit AVR Microcontroller
40-pin high-performance low-power 8-bit AVR microcontroller with 16KB In-System Programmable Flash, 1KB SRAM, 512 bytes EEPROM, 8-channel 10-bit ADC, JTAG interface, and 32 I/O lines.
ATmega32 40-Pin 8-Bit AVR Microcontroller
40-pin AVR microcontroller with 32KB In-System Programmable Flash, 2KB SRAM, 1KB EEPROM, 8-channel 10-bit ADC, JTAG interface, hardware multiplier, and 32 I/O lines.
ATmega8 28-Pin 8-Bit AVR Microcontroller
Classic 28-pin AVR RISC microcontroller with 8KB Flash, 1KB SRAM, 512 bytes EEPROM, 6-channel 10-bit ADC, USART, SPI, I2C (TWI), and 3 PWM channels. Original MCU of the Arduino NG/Severino.
CD4093B Quad 2-Input NAND Schmitt Trigger
CMOS logic integrated circuit consisting of four independent 2-input NAND gates with Schmitt-trigger action on both inputs. Ideal for waveform shaping, noise elimination, astable multivibrators, and monostable pulse generators with wide 3V to 18V operation.
ICL7660 Switched-Capacitor Voltage Inverter
Monolithic CMOS switched-capacitor voltage converter that converts a positive input voltage (+1.5V to +10.0V) to an equivalent negative output voltage (-1.5V to -10.0V) with 99.9% conversion efficiency, requiring only two external capacitors.
MC34063A Universal DC-DC Converter Controller
Monolithic DC-DC converter control circuit containing an internal temperature compensated reference, comparator, duty cycle controlled oscillator with active peak current limit circuit, driver and high current output switch (1.5A peak). Capable of Step-Up (Boost), Step-Down (Buck), and Inverting operation.
Frequently Asked Questions & Transparency
Helpful information about data sources, usage, and privacy
Where does the pinout data and technical specification come from?
The pinout data and technical specifications are based on official manufacturer datasheets as well as publicly available documentation and community resources. As PinoutDatabase is an independent project maintained by me as an individual, I strive for high accuracy, though inadvertent mistakes can still happen.
Can I use the graphics and how are they created?
The SVG vector files and PNG graphics are free to download and use for private/personal purposes. Depending on the component, the diagrams are either crafted manually or generated automatically based on package footprint and pin definitions.
Found an error or missing a component? How can I give feedback?
Community feedback is always appreciated! If you spot an error or are missing a specific component, please use the 'Report Issue' button directly on that component's page or send me a message via the contact form.
Is the site free to use and how is privacy handled?
Currently, using PinoutDatabase is completely free and requires no registration. All interactive web tools run entirely client-side inside your browser. Detailed information regarding data processing can be found directly on our Privacy Policy page.