The Interactive Database for
Pinouts & Hardware Diagrams.
Interactive diagrams, pin functions and links to technical datasheets for microcontrollers, dev boards, and ICs at a glance.
All Boards, Chips & Connectors
Development platforms, microcontrollers, ICs and standard interfaces
Winbond W25Q256JWF-IM (SOIC-16)
1.8V 256M-bit (32M-byte) Serial NOR Flash memory in 16-pin SOIC 300-mil. IM variant with programmable QE=0, /HOLD or /RESET on Pin 1, dedicated hardware /RESET on Pin 3, and JEDEC Device ID 8019h.
78L05 5V 100mA Linear Voltage Regulator
Three-terminal positive linear voltage regulator with fixed 5V output and 100mA output current capability. Internal current-limiting and thermal shutdown make it remarkably rugged.
ATtiny2313 20-Pin 8-Bit AVR Microcontroller
20-pin low-power CMOS 8-bit AVR microcontroller with 2KB In-System Programmable Flash, 128 bytes EEPROM, 128 bytes SRAM, full duplex USART, and SPI master/slave.
ICL8038 Precision Waveform Generator / VCO
Monolithic waveform generator capable of generating simultaneous sine, square, triangular, sawtooth and pulse waveforms with minimum external components.
LM2576 3A Step-Down Switching Voltage Regulator
3A step-down (buck) switching regulator operating at 52kHz. Provides high efficiency (up to 88%) with thermal shutdown, current limiting, and external on/off control.
PIC12F675 8-Pin Flash-Based 8-Bit CMOS Microcontroller
Popular 8-pin CMOS microcontroller with 1.75KB Flash memory, 64 bytes RAM, 128 bytes EEPROM, 4-channel 10-bit ADC, internal 4MHz oscillator, and analog comparator.
PIC18F2550 28-Pin High-Performance USB Microcontroller
28-pin high-performance USB 2.0 Full-Speed microcontroller with 32KB Flash, 2048 bytes RAM, 256 bytes EEPROM, 10-bit ADC, CCP/PWM, and nanoWatt power management.
PIC18F4550 40-Pin High-Performance USB Microcontroller
40-pin flagship USB 2.0 microcontroller with 32KB Flash, 2048 bytes RAM, 256 bytes EEPROM, 13-channel 10-bit ADC, Streaming Parallel Port (SPP), and hardware USB transceiver.
TM1637 2-Wire Serial 7-Segment LED Driver Controller
Dedicated LED drive control circuit with keyboard scan interface and 2-wire serial interface (CLK, DIO). Commonly used to drive 4-digit or 6-digit 7-segment clock displays.
WS2811 3-Channel Constant Current LED Driver IC
3-channel constant-current LED driver IC with single-wire NZR communication protocol. Drives RGB LED strips and pixels with 256 grayscale levels per channel.
XR-2206 Monolithic Function Generator IC
Monolithic function generator IC capable of producing high-quality sine, square, triangle, ramp, and pulse waveforms of high-stability and accuracy from 0.01 Hz to over 1 MHz.
CA3140 4.5MHz BiMOS Operational Amplifier with MOSFET Input
BiMOS operational amplifier combining high-voltage PMOS transistors with high-voltage bipolar transistors on a single monolithic chip. Features 1.5 TΩ input impedance and rail-to-rail output swing.
CD40106B CMOS Hex Schmitt-Trigger Inverter
Six independent inverter circuits with Schmitt-trigger input action. The hysteresis provides high noise immunity and clean square-wave outputs from slowly changing analog inputs.
CD4046B CMOS Micropower Phase-Locked Loop (PLL)
Micropower phase-locked loop consisting of a linear voltage-controlled oscillator (VCO) and two different phase comparators with common signal-input and comparator-input.
LM1875 20W Hi-Fi Audio Power Amplifier
Monolithic power amplifier offering very low distortion (0.015% THD) and high-quality performance for consumer audio applications. Capable of delivering 20W into a 4Ω or 8Ω load.
Frequently Asked Questions & Transparency
Helpful information about data sources, usage, and privacy
Where does the pinout data and technical specification come from?
The pinout data and technical specifications are based on official manufacturer datasheets as well as publicly available documentation and community resources. As PinoutDatabase is an independent project maintained by me as an individual, I strive for high accuracy, though inadvertent mistakes can still happen.
Can I use the graphics and how are they created?
The SVG vector files and PNG graphics are free to download and use for private/personal purposes. Depending on the component, the diagrams are either crafted manually or generated automatically based on package footprint and pin definitions.
Found an error or missing a component? How can I give feedback?
Community feedback is always appreciated! If you spot an error or are missing a specific component, please use the 'Report Issue' button directly on that component's page or send me a message via the contact form.
Is the site free to use and how is privacy handled?
Currently, using PinoutDatabase is completely free and requires no registration. All interactive web tools run entirely client-side inside your browser. Detailed information regarding data processing can be found directly on our Privacy Policy page.