Pinouts & Pin References
for ICs & Semiconductors.

Pinout diagrams for timers, op-amps, logic gates, voltage regulators, and driver ICs.

377+ components available

All Boards, Chips & Connectors

Development platforms, microcontrollers, ICs and standard interfaces

Chip
Texas Instruments

CD4050B CMOS Hex Non-Inverting Buffer / Converter

Hex non-inverting buffer intended for logic-level conversion. Allowed to have input signal voltages up to 15V exceeding the supply voltage (e.g. 5V to 3.3V translation).

Chip
Texas Instruments

CD4069UB CMOS Hex Unbuffered Inverter

CMOS hex unbuffered inverter constructed with complementary MOS transistors. Single-stage design makes it ideal for linear oscillators, amplifiers, and audio synthesis.

Chip
Texas Instruments

DAC0808 8-Bit Multiplying D/A Converter

Classic 8-bit monolithic digital-to-analog converter featuring high speed multiplying capability (150ns settling time) and direct interface with TTL, DTL, and CMOS logic.

Chip
STMicroelectronics

TEA2025B Stereo Audio Power Amplifier

Monolithic dual audio power amplifier designed for portable radio cassette players and multimedia desktop speakers. Delivers 2.3W per channel in stereo or 4.7W in Bridge-Tied Load (BTL) configuration.

Chip
Texas Instruments

74HC139 Dual 2-to-4 Line Decoder/Demultiplexer

High-speed silicon-gate CMOS dual 2-to-4 line decoder/demultiplexer. Features active-low enable inputs and active-low decoded outputs. Ideal for memory address decoding.

Chip
Texas Instruments

74HC153 Dual 4-to-1 Line Data Selector/Multiplexer

Dual 4-line to 1-line data selector/multiplexer with common select inputs and separate active-low enable inputs for each section.

Chip
Texas Instruments

74HC157 Quad 2-Line to 1-Line Data Selector/Multiplexer

Quad 2-line to 1-line multiplexer with non-inverting outputs, common select input, and common active-low strobe/enable.

Chip
Texas Instruments

74HC161 Synchronous 4-Bit Binary Counter (Asynchronous Clear)

Synchronous presettable 4-bit binary counter with asynchronous master reset, look-ahead carry outputs, and synchronous parallel loading.

Chip
Infineon

1EDN7550B Single-channel high/low-side gate driver

Single-channel high-side and low-side gate driver with high-CMR truly differential inputs (TDI). Output source 4 A/0.85 ohm, sink 8 A/0.35 ohm. PG-SOT23-6 package.

Chip
Microchip

24AA02E48 I2C Serial EEPROM

2-wire I2C serial EEPROM, 1.7V to 5.5V supply. Open-drain SDA bidirectional data pin requires pull-up to VCC; SCL serial clock input.

Chip
Infineon

2EDL8023G3CXTMA1 120 V High and Low Side Gate Driver

120 V boot, 3 A/4 A junction-isolated high-side and low-side gate driver IC, 2EDL8x2x family. Source 3 A/4 A, sink 5 A high-side and 6 A low-side. TTL inputs.

Chip
Analog Devices

AD5693R I2C Voltage-Output DAC

Rail-to-rail voltage-output DAC with I2C serial interface, 2.7 V to 5.5 V supply, VLOGIC digital supply option, and internal reference output on VREF. 10-lead MSOP pinout.

Chip
Analog Devices

AD7173-8 Analog-to-Digital Converter

Multichannel sigma-delta ADC with 16 analog inputs, cross point mux, internal 2.5 V reference, serial interface (SCLK, DIN, DOUT/RDY, ~CS), AVDD1/AVDD2/IOVDD supplies, exposed pad to AVSS.

Chip
Analog Devices

AD7685 16-bit SAR ADC

16-bit SAR ADC with pseudo-differential analog input (IN+/IN-), external reference REF, and serial interface (CNV, SCK, SDI, SDO). VIO sets the digital interface supply.

Chip
Analog Devices

AD8421 Gain-Set Differential Amplifier

Amplifier with RG gain-set terminals, G = 1 + (9.9 kOhm / RG), REF terminal for output level shift, +VS/-VS supplies. Shown in 8-lead SOIC, MSOP and LFCSP packages.

Frequently Asked Questions & Transparency

Helpful information about data sources, usage, and privacy

Where does the pinout data and technical specification come from?

The pinout data and technical specifications are based on official manufacturer datasheets as well as publicly available documentation and community resources. As PinoutDatabase is an independent project maintained by me as an individual, I strive for high accuracy, though inadvertent mistakes can still happen.

Can I use the graphics and how are they created?

The SVG vector files and PNG graphics are free to download and use for private/personal purposes. Depending on the component, the diagrams are either crafted manually or generated automatically based on package footprint and pin definitions.

Found an error or missing a component? How can I give feedback?

Community feedback is always appreciated! If you spot an error or are missing a specific component, please use the 'Report Issue' button directly on that component's page or send me a message via the contact form.

Is the site free to use and how is privacy handled?

Currently, using PinoutDatabase is completely free and requires no registration. All interactive web tools run entirely client-side inside your browser. Detailed information regarding data processing can be found directly on our Privacy Policy page.