Pinouts & Pin References
for ICs & Semiconductors.
Pinout diagrams for timers, op-amps, logic gates, voltage regulators, and driver ICs.
All Boards, Chips & Connectors
Development platforms, microcontrollers, ICs and standard interfaces
TLV9062IDR Dual Op Amp
Dual operational amplifier, 8-pin SOIC (D) package, from the TLV9061/TLV9062/TLV9064 family. Pin assignments per datasheet SBOS839N Figure 5-6 and Table 5-3.
TPS54331 3-A 28-V Step-Down DC-DC Converter
3-A, 28-V input non-synchronous buck converter with integrated 80-mOhm high-side MOSFET, fixed 570-kHz switching, Eco-mode pulse skipping, and adjustable slow-start.
TPS62160 Step-Down Converter
Synchronous step-down converter, 3-17 V input, 0.9-6 V adjustable output, power good output, 8-pin WSON with exposed thermal pad (DSG package).
TPS63020 Buck-Boost Converter
Buck-boost DC-DC converter, 1.8 V to 5.5 V supply at VIN/VINA, power save mode and sync input, power good output, 14-pin VSON with exposed thermal pad.
TPS7A2033PDBVR Low-dropout linear voltage regulator
Low-dropout linear regulator with enable input. SOT-23-5 (DBV) package. IN supply, OUT regulated output, EN active-high enable with internal 500k ohm pulldown, GND common ground.
TXB0104PWR 4-bit bidirectional voltage-level translator
4-bit bidirectional voltage-level translator with VCCA (1.2 V to 3.6 V) and VCCB (1.65 V to 5.5 V) supplies, OE tri-state enable. TSSOP-14 (PW) package.
W25Q64JVSSIQ 64Mbit Serial NOR Flash (SPI/Dual/Quad)
64Mbit serial NOR flash with Standard, Dual and Quad SPI interface, 8-pin SOIC 208-mil package.
W25Q80DVSNIG 8Mbit Serial Flash Memory with Dual/Quad SPI
8M-bit serial flash memory with standard, dual and quad SPI interface in 8-pin SOIC 150-mil package (code SN).
nRF52811 QFN48 Bluetooth LE SoC pinout
Nordic nRF52811 Bluetooth Low Energy SoC pin assignment for the QFN48 6x6mm package, including GPIO, 32 MHz and 32.768 kHz crystal pins, SWD, RF antenna and regulator pins.
nRF7002 Wi-Fi 6 companion IC
Nordic nRF7002 dual-band (2.4/5 GHz) Wi-Fi 6 companion IC with QSPI/SPI host interface, coexistence interface and integrated DCDC, QFN 6x6 mm package.
ATmega328P 8-Bit AVR Microcontroller (DIP-28)
20MHz, 32kB Flash, 2kB SRAM, 1kB EEPROM, DIP-28
LP2950-3.3 Micropower Voltage Regulator
Positive 100mA 30V Linear Micropower Voltage Regulator, Fixed Output 3.3V, TO-92
MCP2551 High-Speed CAN Transceiver
High-Speed CAN Transceiver, 1Mbps, 5V supply, DIP-8
LM741 General Purpose Operational Amplifier
Operational Amplifier, DIP-8/TO-99-8
LM393 Dual Differential Comparator
Low-Power, Low-Offset Voltage, Dual Comparators, DIP-8/SOIC-8/TO-99-8
Frequently Asked Questions & Transparency
Helpful information about data sources, usage, and privacy
Where does the pinout data and technical specification come from?
The pinout data and technical specifications are based on official manufacturer datasheets as well as publicly available documentation and community resources. As PinoutDatabase is an independent project maintained by me as an individual, I strive for high accuracy, though inadvertent mistakes can still happen.
Can I use the graphics and how are they created?
The SVG vector files and PNG graphics are free to download and use for private/personal purposes. Depending on the component, the diagrams are either crafted manually or generated automatically based on package footprint and pin definitions.
Found an error or missing a component? How can I give feedback?
Community feedback is always appreciated! If you spot an error or are missing a specific component, please use the 'Report Issue' button directly on that component's page or send me a message via the contact form.
Is the site free to use and how is privacy handled?
Currently, using PinoutDatabase is completely free and requires no registration. All interactive web tools run entirely client-side inside your browser. Detailed information regarding data processing can be found directly on our Privacy Policy page.