Pinouts & Pin-Belegungen
für Module & Breakouts.
Pin-Belegungen und Spezifikationen für Funk-, Treiber-, Display- und Computer-on-Modules (SMARC, NRF24, ESP-01, A4988, OLEDs).
Alle Boards, Chips & Stecker
Entwicklungsplattformen, Mikrocontroller, ICs und Standard-Schnittstellen
Raspberry Pi Compute Module 5 (CM5 / CM5Lite)
High-performance System-on-Module powered by Broadcom BCM2712 quad-core Cortex-A76 @ 2.4GHz and RP1 I/O controller, up to 16GB LPDDR4x-4267, optional eMMC, PCIe Gen2 x1, Gigabit Ethernet, dual 4Kp60 HDMI, dual 4-lane MIPI, dual USB 3.0 via two 100-pin Hirose DF40 connectors.
COM Express Type 10 (Rev. 3.0) Pinout
PICMG COM Express COM.0 R3.0 Type 10 pinout specification for Mini (84×55 mm) and Compact modules featuring a 220-pin mezzanine connector (Rows A & B).
COM Express Type 6 (Rev. 3.0) Pinout
PICMG COM Express COM.0 R3.0 Type 6 pinout specification for Compact (95×95 mm) and Basic (125×95 mm) modules featuring 440 pins across two mezzanine connectors (Rows A, B, C, D).
COM Express Type 7 (Rev. 3.0) Pinout
PICMG COM Express COM.0 R3.0 Type 7 server-grade pinout specification for Basic (125×95 mm) and Extended (155×110 mm) modules featuring up to four 10GbE (10GBASE-KR) interfaces and 32 PCI Express lanes across two mezzanine connectors.
OSM Size-0 (Rev. 1.2) Pinout
SGeT Open Standard Module (OSM) V1.2 Size-0 (Zero, 30×15 mm) pinout specification with 188 LGA solder contacts for ultra-compact embedded IoT modules.
OSM Size-L (Rev. 1.2) Pinout
SGeT Open Standard Module (OSM) V1.2 Size-L (Large, 45×45 mm) pinout specification with 662 LGA solder contacts featuring up to 5x Ethernet, PCIe x4, LVDS and extensive high-speed interfaces.
OSM Size-M (Rev. 1.2) Pinout
SGeT Open Standard Module (OSM) V1.2 Size-M (Medium, 30×45 mm) pinout specification with 476 LGA solder contacts featuring dual eDP, UFS, PCIe, triple Ethernet and advanced I/O.
OSM Size-S (Rev. 1.2) Pinout
SGeT Open Standard Module (OSM) V1.2 Size-S (Small, 30×30 mm) pinout specification with 332 LGA solder contacts featuring MIPI CSI/DSI, PCIe, RGB, USB and dual Ethernet.
Raspberry Pi Compute Module 4 (CM4 / CM4Lite)
System-on-Module powered by Broadcom BCM2711 quad-core Cortex-A72 @ 1.5GHz, up to 8GB LPDDR4, optional eMMC, PCIe Gen2 x1, Gigabit Ethernet, dual HDMI 4Kp60, via two 100-pin Hirose DF40 board-to-board connectors.
SMARC 2.2 Computer-on-Module Pinout
Standardized 314-pin edge connector pinout specification for Smart Mobility ARChitecture (SMARC 2.2) Computer-on-Modules (82x50mm & 82x80mm). Defines LVDS/eDP/DSI, HDMI/DP++, 4x PCIe, 2x GBE, 6x USB 2.0/3.2, 4x MIPI-CSI, SATA, SPI/eSPI/QSPI, audio, serial and power management signals.
Raspberry Pi Compute Module 3+ (CM3+ / CM3 / CM1)
Standard DDR2-SODIMM 200-pin System on Module powered by Broadcom BCM2837B0 64-bit quad-core Cortex-A53 @ 1.2GHz, 1GB LPDDR2 RAM, and optional 8GB/16GB/32GB eMMC Flash (or Lite). Pin-compatible with CM1 and CM3.
Raspberry Pi Compute Module 4S (CM4S)
Drop-in upgrade for CM1/CM3/CM3+ SODIMM carrier boards featuring the Raspberry Pi 4 BCM2711 quad-core Cortex-A72 @ 1.5GHz processor, up to 8GB LPDDR4-3200 SDRAM, and eMMC in the 200-pin SODIMM form factor.
Raspberry Pi Compute Module Zero (CM0 / CM0Lite)
Compact 39mm x 33mm System-on-Module based on Raspberry Pi Zero 2 W with RP3A0 SiP (quad-core 64-bit BCM2837 @ 1GHz, 512MB LPDDR2, optional 8GB/16GB eMMC or Lite) featuring 132 castellated edge pins at 1mm pitch.
ESP8266 ESP-01 / ESP-01S Wi-Fi Module
Ultra-compact 2.4 GHz Wi-Fi module with integrated TCP/IP stack, 32-bit Tensilica MCU, and 2x4 (8-pin) 2.54mm pitch header.
RC522 13.56 MHz RFID / NFC Reader Module (MFRC522)
Popular contactless 13.56 MHz RFID reader/writer module based on the MFRC522 IC, supporting ISO/IEC 14443 A / MIFARE cards via SPI interface.
Häufige Fragen & Transparenz
Wissenswertes zu Datenquellen, Nutzung und Datenschutz
Woher stammen die Pinout-Daten und Spezifikationen?
Die Pinout-Daten und technischen Angaben basieren auf den Datenblättern der jeweiligen Hersteller sowie frei zugänglichen Dokumentationen und öffentlichen Quellen. Da PinoutDatabase ein unabhängiges Projekt ist, das ich als Einzelperson pflege, gebe ich mein Bestes für hohe Genauigkeit, Fehler können aber natürlich vorkommen.
Darf ich die Grafiken nutzen und wie werden sie erstellt?
Die SVG-Vektordateien und PNG-Grafiken dürfen für private Zwecke frei heruntergeladen und verwendet werden. Die Diagramme erstelle ich je nach Bauteil entweder manuell oder generiere sie automatisiert anhand der jeweiligen Gehäuse-Bauform und Pinbelegung.
Fehler entdeckt oder ein Bauteil fehlt? Wie kann ich Feedback geben?
Feedback aus der Community ist sehr willkommen! Wenn du einen Fehler entdeckst oder ein bestimmtes Bauteil vermisst, nutze einfach den 'Fehler melden'-Button direkt auf der jeweiligen Bauteilseite oder schreibe mir eine Nachricht über das Kontaktformular.
Ist die Nutzung kostenlos und wie steht es um den Datenschutz?
Aktuell ist die Nutzung von PinoutDatabase komplett kostenlos und ohne Registrierung möglich. Alle interaktiven Web-Tools laufen rein clientseitig in deinem Browser. Ausführliche Details zur Datenverarbeitung findest du direkt auf der Datenschutzseite.