I2C-Pins: SDA und SCL auf einen Blick
Die I2C-Leitungen von Boards, Mikrocontrollern, Sensoren und Steckern, direkt aus den Pinout-Daten.
I2C (Inter-Integrated Circuit, auch IIC oder TWI) verbindet einen Controller mit vielen Bausteinen über nur zwei Leitungen: SDA trägt die Daten, SCL den Takt. Beide Leitungen sind Open-Drain und brauchen Pull-up-Widerstände nach VCC, typisch 4,7 kΩ bei 100 kHz und 2,2 kΩ bei 400 kHz. Jeder Teilnehmer hat eine 7-Bit-Adresse, deshalb lassen sich Sensoren, EEPROMs, Echtzeituhren und Displays parallel an denselben Bus hängen.
Die Tabelle zeigt für jedes Bauteil, an welchen Pins SDA und SCL liegen. Bei Boards wie dem Raspberry Pi Pico oder dem Raspberry Pi 4 lassen sich die I2C-Funktionen auf mehrere GPIOs legen; dann stehen die ersten Möglichkeiten in der Tabelle und die Anzahl weiterer Pins dahinter. Auch Bildschirmanschlüsse tauchen auf: HDMI, DVI und VGA übertragen die Monitor-Kennung (EDID) über den DDC-Kanal, der elektrisch ein I2C-Bus ist.
Achte beim Verdrahten auf die Spannung. Ein 5-V-Arduino und ein 3,3-V-Sensor brauchen einen Pegelwandler, wenn die Pull-ups nach 5 V gehen. Ein Klick auf ein Bauteil öffnet das vollständige Pinout mit allen Alternativfunktionen und Datenblatt.
I2C-Pins je Bauteil
| Bauteil | SDA | SCL |
|---|---|---|
| Arduino Uno R3Arduino | 13 · A431 · SDA | 14 · A532 · SCL |
| Arduino Nano V3Arduino | 23 · A4 | 24 · A5 |
| Arduino Mega 2560 R3Arduino | 26 · D20 / SDA49 · D20 / SDA | 25 · D21 / SCL50 · D21 / SCL |
| Arduino Pro Mini (ATmega328P)SparkFun / Arduino | 25 · A4 | 26 · A5 |
| ESP32 DevKit V1 (38-Pin)Espressif Systems | 25 · IO21 | 22 · IO22 |
| NodeMCU V2 (ESP8266 / ESP-12E)Espressif Systems | 18 · D2 | 17 · D1 |
| Seeed Studio XIAO ESP32-C3 Development BoardSeeed Studio / Espressif | 12 · D4 | 13 · D5 |
| Raspberry Pi Pico (RP2040)Raspberry Pi Ltd | 1 · GP04 · GP26 · GP4+9 | 2 · GP15 · GP37 · GP5+9 |
| Raspberry Pi Pico W (Wi-Fi & Bluetooth)Raspberry Pi Ltd | 1 · GP04 · GP26 · GP4+10 | 2 · GP15 · GP37 · GP5+9 |
| Raspberry Pi 4 Model BRaspberry Pi Ltd | 3 · GPIO215 · GPIO2219 · GPIO10+5 | 5 · GPIO316 · GPIO2321 · GPIO9+6 |
| Raspberry Pi 5Raspberry Pi Ltd | 3 · GPIO215 · GPIO2219 · GPIO10+4 | 5 · GPIO316 · GPIO2321 · GPIO9+5 |
| STM32F103C8T6 'Blue Pill' BoardSTMicroelectronics / Generic | 15 · PB717 · PB925 · PB11 | 14 · PB616 · PB826 · PB10 |
| PJRC Teensy 4.0 (ARM Cortex-M7)PJRC | 24 · 1725 · 1825 | 23 · 1626 · 1924 |
| ATmega328P 8-Bit AVR Microcontroller (DIP-28)Microchip / Atmel | 27 · PC4 | 28 · PC5 |
| ATmega328P 8-Bit AVR MicrocontrollerMicrochip / Atmel | 27 · PC4 | 28 · PC5 |
| ATmega32U4 8-Bit Microcontroller with USB (TQFP-44)Microchip / Atmel | 19 · PD1 | 18 · PD0 |
| ATtiny85 8-Bit AVR Microcontroller (DIP-8)Microchip / Atmel | 5 · AREF/PB0 | 7 · PB2 |
| ATtiny84 8-Bit AVR Microcontroller (DIP-14)Microchip / Atmel | 6 · PA7 | 9 · PA4 |
| PIC16F886 28-Pin Flash Microcontroller with nanoWatt (DIP-28)Microchip Technology | 15 · RC4 | 14 · RC3 |
| BME280 Environmental Sensor ModuleBosch Sensortec | 4 · SDA | 3 · SCL |
| BMP280 Digital Barometric Pressure SensorBosch Sensortec | 4 · SDA | 3 · SCL |
| AHT20 Digital Temperature & Humidity SensorASAIR (Guangzhou Aosong Electronics) | 2 · SDA | 4 · SCL |
| SHT31-D Digital Temperature & Humidity SensorSensirion AG | 4 · SDA | 3 · SCL |
| BH1750FVI Digital Ambient Light Sensor (GY-302)ROHM Semiconductor | 4 · SDA | 3 · SCL |
| MPU-6050 6-Axis MotionTracking IMU (GY-521)TDK InvenSense | 4 · SDA5 · XDA | 3 · SCL6 · XCL |
| VL53L0X Time-of-Flight (ToF) Distance SensorSTMicroelectronics | 4 · SDA | 3 · SCL |
| INA219 High-Side Current & Power Sensor ModuleTexas Instruments | 4 · SDA | 3 · SCL |
| INA226 Precision Current/Power MonitorTexas Instruments | 5 · SDA | 6 · SCL |
| ADS1115 16-Bit 4-Channel Precision ADC ModuleTexas Instruments | 4 · SDA | 3 · SCL |
| PCF8591 8-Bit 4-Channel ADC and 1-Channel DAC (I2C)NXP Semiconductors | 9 · SDA | 10 · SCL |
| MCP4725 12-Bit DAC with I2C Interface and EEPROMMicrochip Technology | 4 · SDA | 5 · SCL |
| DS1307 64 x 8 Serial Real-Time Clock (I2C)Maxim Integrated / Analog Devices | 5 · SDA | 6 · SCL |
| DS3231 Extremely Accurate I2C Integrated RTC/TCXO/CrystalMaxim Integrated / Analog Devices | 15 · SDA | 16 · SCL |
| PCF8563 Real-Time Clock/CalendarNXP Semiconductors | 5 · SDA | 6 · SCL |
| MCP23017 16-Bit I/O Expander with I2C InterfaceMicrochip Technology | 13 · SDA | 12 · SCL |
| PCF8574 Remote 8-Bit I/O Expander for I2C BusNXP Semiconductors / Texas Instruments | 15 · SDA | 14 · SCL |
| PCF8575 16-Bit I2C I/O ExpanderNXP Semiconductors | 23 · SDA | 22 · SCL |
| TCA9548A 8-Channel I2C MultiplexerTexas Instruments | 6 · SD08 · SD110 · SD2+6 | 7 · SC09 · SC111 · SC2+6 |
| PCA9685 16-Channel 12-Bit PWM / Servo DriverNXP Semiconductors / Adafruit | 4 · SDA | 3 · SCL |
| SSD1306 0.96" I2C / SPI OLED Display ModuleSolomon Systech / Generic | 4 · SDA | 3 · SCL |
| 24LC16B 16Kb I2C Serial EEPROMMicrochip Technology | 5 · SDA | 6 · SCL |
| 24LC256 256Kb I2C Compatible 2-Wire Serial EEPROMMicrochip Technology | 5 · SDA | 6 · SCL |
| AT24C32 32-Kbit I2C Serial EEPROMMicrochip / Atmel | 5 · SDA | 6 · SCL |
| HDMI Type-A 19-Pin InterfaceHDMI Forum / HDMI Licensing Administrator | 16 · SDA | 15 · SCL |
| Micro HDMI (Type D) 19-Pin InterfaceHDMI Forum / HDMI Licensing Administrator | 16 · SDA | 15 · SCL |
| DVI-D Single Link Digital Video ConnectorDDWG (Digital Display Working Group) | 7 · DDC DATA | 6 · DDC CLK |
| DVI-I Single Link Integrated (Digital + Analog) Video ConnectorDDWG (Digital Display Working Group) | 7 · DDC DATA | 6 · DDC CLK |
| VGA (DE-15 / D-Sub 15-Pin Interface)IBM / VESA | 12 · SDA | 15 · SCL |
| M.2 (NGFF) Key M Connector (NVMe SSD)PCI-SIG | 42 · SMB_DATA | 40 · SMB_CLK |
Pin-Nummer · Pin-Name. „+n“ = weitere Pins mit derselben Funktion.
Alle Bauteile (49)
Arduino Uno R3
The flagship microcontroller board based on the ATmega328P featuring 14 digital I/O pins (6 PWM), 6 analog inputs, 16 MHz quartz crystal, USB connection, power jack, and ICSP header.
Arduino Nano V3
Compact, breadboard-friendly 8-bit AVR development board based on the ATmega328P with 30-pin dual-inline layout, mini-USB / USB-C, 8 analog inputs, and onboard 5V regulator.
Arduino Mega 2560 R3
Microcontroller board based on the ATmega2560 featuring 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 hardware UART serial ports, a 16 MHz crystal oscillator, USB connection, a power jack, an ICSP header, and a reset button.
Arduino Pro Mini (ATmega328P)
Minimalist 8-bit AVR microcontroller board based on the ATmega328P running at 16 MHz (5V) or 8 MHz (3.3V) with no onboard USB, optimized for permanent installation and low power.
ESP32 DevKit V1 (38-Pin)
Widely used 2.4 GHz Wi-Fi and Bluetooth development board powered by the dual-core Tensilica Xtensa 32-bit LX6 microprocessor with 38 total pins.
NodeMCU V2 (ESP8266 / ESP-12E)
Popular Wi-Fi development board powered by the ESP8266 32-bit Tensilica L106 microcontroller running at 80/160 MHz, with integrated USB-UART, 4MB Flash, and 30 breadboard-friendly pins.
Seeed Studio XIAO ESP32-C3 Development Board
Thumb-sized (21 x 17.5 mm) IoT development board powered by the Espressif ESP32-C3 32-bit RISC-V single-core processor at up to 160 MHz. Features 2.4GHz Wi-Fi 4, Bluetooth 5.0 (BLE), integrated battery charging management, USB-C, and 14 breadboard-friendly GPIO pins.
Raspberry Pi Pico (RP2040)
High-performance microcontroller board built around the Raspberry Pi RP2040 dual-core ARM Cortex-M0+ processor at 133 MHz with 2MB QSPI flash, 26 multifunction GPIOs, 3 ADCs, and Programmable I/O (PIO).
Raspberry Pi Pico W (Wi-Fi & Bluetooth)
High-performance wireless microcontroller board built around the RP2040 dual-core ARM Cortex-M0+ processor and an Infineon CYW43439 wireless chip supporting 2.4GHz 802.11n Wi-Fi 4 and Bluetooth 5.2 (BLE). Features 26 multifunction GPIOs, 3 ADC channels, 2MB onboard flash, and 8 Programmable I/O (PIO) state machines.
Raspberry Pi 4 Model B
Popular single-board computer featuring a 1.5 GHz 64-bit quad-core ARM Cortex-A72 processor (Broadcom BCM2711), dual 4K micro-HDMI, Gigabit Ethernet, USB 3.0, and 40-pin GPIO header.
Raspberry Pi 5
Latest single-board computer featuring a 2.4 GHz 64-bit quad-core ARM Cortex-A76 processor (Broadcom BCM2712), dual micro-HDMI, Gigabit Ethernet, USB 3.0, PCIe 2.0 x1, and 40-pin GPIO header.
STM32F103C8T6 'Blue Pill' Board
Popular low-cost 32-bit ARM Cortex-M3 development board featuring 72 MHz clock, 64KB Flash, 20KB SRAM, USB 2.0 Full Speed, and 40 breadboard-friendly pins.
PJRC Teensy 4.0 (ARM Cortex-M7)
Ultra high-performance development board featuring an ARM Cortex-M7 processor at 600 MHz (NXP i.MX RT1062), 2048K Flash, 1024K RAM, 40 total I/O pins, and hardware floating-point support.
ATmega328P 8-Bit AVR Microcontroller (DIP-28)
20MHz, 32kB Flash, 2kB SRAM, 1kB EEPROM, DIP-28
ATmega328P 8-Bit AVR Microcontroller
High performance, low power 8-bit AVR RISC-based microcontroller with 32KB flash, standard on Arduino Nano and Uno.
ATmega32U4 8-Bit Microcontroller with USB (TQFP-44)
16MHz, 32kB Flash, 2.5kB SRAM, 1kB EEPROM, USB 2.0, TQFP-44
ATtiny85 8-Bit AVR Microcontroller (DIP-8)
20MHz, 8kB Flash, 512B SRAM, 512B EEPROM, debugWIRE, DIP-8
ATtiny84 8-Bit AVR Microcontroller (DIP-14)
20MHz, 8kB Flash, 512B SRAM, 512B EEPROM, debugWIRE, DIP-14
PIC16F886 28-Pin Flash Microcontroller with nanoWatt (DIP-28)
8K Flash, 256B SRAM, 256B EEPROM, XLP, DIP28
BME280 Environmental Sensor Module
Precision digital environmental sensor measuring relative humidity, barometric pressure, and ambient temperature via I2C and SPI interfaces.
BMP280 Digital Barometric Pressure Sensor
High-precision, low-power digital barometric pressure and temperature sensor with I2C/SPI interface, commonly used for altitude estimation and weather stations.
AHT20 Digital Temperature & Humidity Sensor
Digital I2C temperature and humidity sensor with factory calibration and low power consumption, widely used as a modern successor to the DHT11/DHT22 series.
SHT31-D Digital Temperature & Humidity Sensor
High-accuracy, fully calibrated digital I2C temperature and humidity sensor with two selectable addresses and an ALERT pin for humidity/temperature threshold monitoring.
BH1750FVI Digital Ambient Light Sensor (GY-302)
Digital 16-bit ambient light sensor IC with I2C bus interface for illuminance measurements from 1 to 65535 lx with human eye spectral response.
MPU-6050 6-Axis MotionTracking IMU (GY-521)
Widely used 6-axis MotionTracking device combining a 3-axis gyroscope and a 3-axis accelerometer with an onboard Digital Motion Processor (DMP) and auxiliary I2C master.
VL53L0X Time-of-Flight (ToF) Distance Sensor
Laser-ranging Time-of-Flight (ToF) sensor module measuring absolute distances up to 2 meters independent of target reflectance and color.
INA219 High-Side Current & Power Sensor Module
Bidirectional current and power monitor with I2C-compatible interface, capable of measuring high-side voltages up to +26V and currents up to 3.2A with 0.1 ohm shunt.
INA226 Precision Current/Power Monitor
Bidirectional current, voltage, and power monitor with I2C/SMBus interface and a programmable alert pin, offering higher resolution and accuracy than the popular INA219.
ADS1115 16-Bit 4-Channel Precision ADC Module
Ultra-small, low-power 16-bit precision Analog-to-Digital Converter with internal reference, oscillator, programmable gain amplifier (PGA), and I2C interface.
PCF8591 8-Bit 4-Channel ADC and 1-Channel DAC (I2C)
Single-chip, single-supply low-power 8-bit data acquisition device with four analog inputs, one analog output (DAC), and an I2C-bus interface.
MCP4725 12-Bit DAC with I2C Interface and EEPROM
Low-power, high accuracy, single channel, 12-bit voltage output Digital-to-Analog Converter (DAC) with integrated non-volatile EEPROM and 2-wire I2C interface. Stores power-on reset output settings directly in on-board EEPROM.
DS1307 64 x 8 Serial Real-Time Clock (I2C)
64 x 8, Serial, I2C Real-time clock, 4.5V to 5.5V VCC, 0°C to +70°C, DIP-8
DS3231 Extremely Accurate I2C Integrated RTC/TCXO/Crystal
Extremely Accurate I2C-Integrated RTC/TCXO/Crystal SOIC-16
PCF8563 Real-Time Clock/Calendar
Low-power CMOS Real-Time Clock/Calendar with I2C interface, programmable clock output, alarm and timer functions, backed by a 32.768kHz crystal oscillator.
MCP23017 16-Bit I/O Expander with I2C Interface
16-bit general purpose parallel I/O port expander with high-speed I2C interface (up to 1.7 MHz), configurable interrupt output pins, and 100k internal pull-ups.
PCF8574 Remote 8-Bit I/O Expander for I2C Bus
General-purpose 8-bit quasi-bidirectional I/O expander for the two-line bidirectional I2C-bus with open-drain interrupt output, widely used in HD44780 LCD I2C backpacks.
PCF8575 16-Bit I2C I/O Expander
Remote 16-bit I2C-bus general purpose parallel input/output expander with interrupt output, offering quasi-bidirectional I/O across two 8-bit ports (P0, P1), the 16-bit sibling of the PCF8574.
TCA9548A 8-Channel I2C Multiplexer
8-channel bidirectional I2C/SMBus switch with reset, used to resolve address conflicts between identical I2C sensor breakouts by isolating each device on its own sub-bus.
PCA9685 16-Channel 12-Bit PWM / Servo Driver
I2C-bus controlled 16-channel LED and PWM controller optimized for RGB/RGBA color backlighting and 12-bit servo motor control up to 1.6 kHz.
SSD1306 0.96" I2C / SPI OLED Display Module
Standard monochrome 128x64 dot matrix OLED display module driven by the SSD1306 controller with built-in charge pump and support for 4-pin I2C and 7-pin SPI pinouts.
24LC16B 16Kb I2C Serial EEPROM
I2C Serial EEPROM, 16Kb (2048 x 8), 2.5–5.5V, DIP-8/SOIC-8/TSSOP-8. Address pins A0–A2 are No Connect (NC), block addressing is handled internally via the I2C address byte.
24LC256 256Kb I2C Compatible 2-Wire Serial EEPROM
I2C Serial EEPROM, 256Kb (32768 x 8), 2.5–5.5V, DIP-8/SOIC-8/TSSOP-8/DFN-8. Up to 8 devices on one bus via A0–A2 address pins.
AT24C32 32-Kbit I2C Serial EEPROM
32-Kbit (4096 x 8) serial I2C EEPROM with hardware write protection, 32-byte page write, and 1 million write endurance. Commonly paired with DS3231 RTC modules.
HDMI Type-A 19-Pin Interface
Standard 19-pin interface for uncompressed digital audio and video transmission (TMDS / FRL), Consumer Electronics Control (CEC), and DDC/HDCP display communication.
Micro HDMI (Type D) 19-Pin Interface
Miniaturized 19-pin HDMI connector (Type D) with the same electrical signal assignment as HDMI Type-A, used on cameras, tablets, and single-board computers like the Raspberry Pi Zero and Pi 4.
DVI-D Single Link Digital Video Connector
Digital-only DVI connector with 24 signal pins plus 1 ground blade for single-link TMDS signaling. Supports resolutions up to 1920x1200 at 60Hz (single link) or 2560x1600 (dual link).
DVI-I Single Link Integrated (Digital + Analog) Video Connector
Integrated DVI connector carrying both digital TMDS and analog VGA signals. 24 digital pins plus 5 analog pins (4 analog contacts + 1 ground blade). Supports single-link resolutions up to 1920x1200 at 60Hz.
VGA (DE-15 / D-Sub 15-Pin Interface)
Standard 15-pin 3-row D-Sub connector for analog RGB component video signals, horizontal/vertical synchronization, and DDC2B (I2C) display communication.
M.2 (NGFF) Key M Connector (NVMe SSD)
Standard 75-position M.2 Key M edge connector interface (notch at pins 59-66) supporting PCIe 3.0/4.0/5.0 x4 lanes, SATA III, SMBus, and 3.3V power for high-performance NVMe Solid-State Drives.