SPI-Pins: MOSI, MISO, SCK und CS
Die SPI-Leitungen von Boards, Mikrocontrollern, Speichern und Modulen, direkt aus den Pinout-Daten.
SPI (Serial Peripheral Interface) ist ein schneller, synchroner Bus mit vier Leitungen. Der Controller gibt mit SCK den Takt vor, schickt Daten über MOSI (neu: COPI) und liest über MISO (neu: CIPO). Jedes Gerät hat eine eigene Chip-Select-Leitung (CS oder SS), die aktiv low ist. Weil SPI ohne Adressen und ohne Pull-ups auskommt, erreicht der Bus problemlos mehrere Megahertz und ist die erste Wahl für Flash-Speicher, SD-Karten, Displays, ADCs und Funkmodule.
Die Tabelle zeigt für jedes Bauteil, welche Pins MOSI, MISO, SCK und CS sind. Hersteller benennen die Leitungen unterschiedlich: Am Speicherchip heißen sie oft SI, SO, DI und DO, am Display D1 und D0, an der SD-Karte CMD und DAT0. Wichtig ist immer die Richtung aus Sicht des Bauteils: Der Dateneingang des Speichers (DI oder SI) kommt an MOSI des Controllers.
Bei Boards mit frei zuweisbaren Pins wie Raspberry Pi Pico, ESP32 oder STM32 stehen die ersten Möglichkeiten in der Tabelle. Ein Klick auf ein Bauteil öffnet das vollständige Pinout mit allen Funktionen und dem Datenblatt.
SPI-Pins je Bauteil
| Bauteil | MOSI / COPI | MISO / CIPO | SCK | CS / SS |
|---|---|---|---|---|
| Arduino Uno R3Arduino | 26 · D11~4 · COPI | 27 · D121 · CIPO | 28 · D133 · SCK | 25 · D10~ |
| Arduino Nano V3Arduino | 14 · ~D114 · COPI | 15 · D121 · CIPO | 16 · D133 · SCK | 13 · ~D10 |
| Arduino Mega 2560 R3Arduino | 32 · D514 · COPI | 31 · D501 · CIPO | 33 · D523 · SCK | 34 · D53 |
| Arduino Pro Mini (ATmega328P)SparkFun / Arduino | 23 · ~D11 | 22 · D12 | 21 · D13 | 24 · ~D10 |
| ESP32 DevKit V1 (38-Pin)Espressif Systems | 18 · CMD21 · IO2336 · D1 | 27 · IO19 | 28 · IO1837 · D038 · CLK | 29 · IO5 |
| ESP32-S3 DevKitC-1 (44-Pin)Espressif Systems | 17 · 1135 | 19 · 1333 · 37 | 18 · 1234 · 3638 · 48+1 | – |
| NodeMCU V2 (ESP8266 / ESP-12E)Espressif Systems | 6 · SD125 · D7 | 8 · SD024 · D6 | 9 · CLK23 · D5 | 7 · CMD26 · D8 |
| Raspberry Pi Pico (RP2040)Raspberry Pi Ltd | 5 · GP310 · GP715 · GP11+3 | 1 · GP06 · GP411 · GP8+3 | 4 · GP29 · GP614 · GP10+3 | 2 · GP17 · GP512 · GP9+2 |
| Raspberry Pi Pico W (Wi-Fi & Bluetooth)Raspberry Pi Ltd | 5 · GP310 · GP715 · GP11+3 | 1 · GP06 · GP411 · GP8+3 | 4 · GP29 · GP614 · GP10+3 | 2 · GP17 · GP512 · GP9+2 |
| Raspberry Pi 4 Model BRaspberry Pi Ltd | 3 · GPIO28 · GPIO1419 · GPIO10+2 | 21 · GPIO929 · GPIO533 · GPIO13+1 | 5 · GPIO310 · GPIO1523 · GPIO11+1 | 7 · GPIO411 · GPIO1712 · GPIO18+8 |
| Raspberry Pi 5Raspberry Pi Ltd | 3 · GPIO28 · GPIO1419 · GPIO10+2 | 21 · GPIO929 · GPIO533 · GPIO13+1 | 5 · GPIO310 · GPIO1523 · GPIO11+1 | 7 · GPIO411 · GPIO1712 · GPIO18+8 |
| STM32F103C8T6 'Blue Pill' BoardSTMicroelectronics / Generic | 4 · PB1513 · PB529 · PA7 | 3 · PB1412 · PB430 · PA6 | 2 · PB1311 · PB331 · PA5 | 1 · PB1210 · PA1532 · PA4 |
| PJRC Teensy 4.0 (ARM Cortex-M7)PJRC | 13 · 112426+1 | 14 · 1234 | 20 · 132739 · 37 | 12 · 1037 · 36 |
| ATmega328P 8-Bit AVR Microcontroller (DIP-28)Microchip / Atmel | 17 · PB3 | 18 · PB4 | 19 · PB5 | 16 · PB2 |
| ATmega328P 8-Bit AVR MicrocontrollerMicrochip / Atmel | 15 · PB3 | 16 · PB4 | 17 · PB5 | 14 · PB2 |
| ATmega32U4 8-Bit Microcontroller with USB (TQFP-44)Microchip / Atmel | 10 · PB2 | 11 · PB3 | 9 · PB1 | 8 · PB0 |
| ATtiny85 8-Bit AVR Microcontroller (DIP-8)Microchip / Atmel | 5 · AREF/PB0 | 6 · PB1 | 7 · PB2 | – |
| ATtiny84 8-Bit AVR Microcontroller (DIP-14)Microchip / Atmel | 6 · PA7 | 7 · PA6 | 8 · PA59 · PA4 | – |
| ATtiny13 8-Bit AVR Microcontroller (DIP-8)Microchip / Atmel | 5 · PB0 | 6 · PB1 | 7 · PB2 | – |
| PIC16F886 28-Pin Flash Microcontroller with nanoWatt (DIP-28)Microchip Technology | 15 · RC416 · RC5 | – | 14 · RC3 | 7 · RA5 |
| BME280 Environmental Sensor ModuleBosch Sensortec | 4 · SDA | 6 · SDO | 3 · SCL | 5 · CSB |
| BMP280 Digital Barometric Pressure SensorBosch Sensortec | 4 · SDA | 6 · SDO | 3 · SCL | – |
| MAX31855 Cold-Junction Compensated Thermocouple-to-Digital ConverterAnalog Devices | – | 7 · SO | 5 · SCK | – |
| MAX6675 K-Thermocouple-to-Digital ConverterMaxim Integrated / Analog Devices | – | 5 · SO7 · SO | 3 · SCK5 · SCK | 4 · CS6 · CS |
| MCP3008 8-Channel 10-Bit ADC with SPI InterfaceMicrochip Technology | 11 · DIN | 12 · DOUT | 13 · CLK | 10 · ~CS/SHDN |
| MCP4921 12-Bit DAC with SPI InterfaceMicrochip Technology | 4 · SDI | – | 3 · SCK | – |
| MCP23S17 16-Bit I/O Expander with SPI InterfaceMicrochip Technology | 13 · SI | 14 · SO | 12 · SCK | 11 · ~CS |
| MAX7219 8-Digit LED Display DriverMaxim Integrated / Analog Devices | 1 · DIN | 24 · DOUT | 13 · CLK | 12 · LOAD |
| TLC5940 16-Channel LED Driver with Dot CorrectionTexas Instruments | 26 · SIN | 17 · SOUT | 25 · SCLK | – |
| nRF24L01+ 2.4GHz Wireless Transceiver ModuleNordic Semiconductor | 6 · MOSI | 7 · MISO | 5 · SCK | 4 · CSN |
| RC522 13.56 MHz RFID / NFC Reader Module (MFRC522)NXP Semiconductors / Generic | 3 · MOSI | 4 · MISO | 2 · SCK | 1 · SDA |
| SSD1306 0.96" I2C / SPI OLED Display ModuleSolomon Systech / Generic | 4 · D1 | – | 3 · D0 | 7 · CS |
| SD Card InterfaceSD Association | 2 · CMD | 7 · DAT0 | 5 · CLK | 1 · CD/DAT3 |
| microSD Card InterfaceSD Association | 3 · CMD | 7 · DAT0 | 5 · CLK | 2 · CD/DAT3 |
| 25LC256 / 25LCxxx SPI Serial EEPROM FamilyMicrochip Technology | 5 · SI | 2 · SO | 6 · SCK | 1 · CS |
| W25Q32JV 32Mbit SPI NOR Flash MemoryWinbond Electronics | 5 · DI (IO0) | 2 · DO (IO1) | 6 · CLK | 1 · /CS |
| Winbond W25Q128JWS (SOIC-8 / WSON-8)Winbond Electronics | 5 · DI (IO0) | 2 · DO (IO1) | 6 · CLK | 1 · /CS |
| Winbond W25Q256JW (WSON-8)Winbond Electronics | 5 · DI (IO0) | 2 · DO (IO1) | 6 · CLK | 1 · /CS |
| Macronix MX25L25645G (SOP-8 / WSON-8)Macronix | 5 · SI / SIO0 | 2 · SO / SIO1 | 6 · SCLK | 1 · CS# |
Pin-Nummer · Pin-Name. „+n“ = weitere Pins mit derselben Funktion.
Alle Bauteile (39)
Arduino Uno R3
The flagship microcontroller board based on the ATmega328P featuring 14 digital I/O pins (6 PWM), 6 analog inputs, 16 MHz quartz crystal, USB connection, power jack, and ICSP header.
Arduino Nano V3
Compact, breadboard-friendly 8-bit AVR development board based on the ATmega328P with 30-pin dual-inline layout, mini-USB / USB-C, 8 analog inputs, and onboard 5V regulator.
Arduino Mega 2560 R3
Microcontroller board based on the ATmega2560 featuring 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 hardware UART serial ports, a 16 MHz crystal oscillator, USB connection, a power jack, an ICSP header, and a reset button.
Arduino Pro Mini (ATmega328P)
Minimalist 8-bit AVR microcontroller board based on the ATmega328P running at 16 MHz (5V) or 8 MHz (3.3V) with no onboard USB, optimized for permanent installation and low power.
ESP32 DevKit V1 (38-Pin)
Widely used 2.4 GHz Wi-Fi and Bluetooth development board powered by the dual-core Tensilica Xtensa 32-bit LX6 microprocessor with 38 total pins.
ESP32-S3 DevKitC-1 (44-Pin)
Next-generation 2.4 GHz Wi-Fi and Bluetooth 5 (LE) development board powered by the dual-core Xtensa 32-bit LX7 microprocessor with AI vector instructions and USB-OTG.
NodeMCU V2 (ESP8266 / ESP-12E)
Popular Wi-Fi development board powered by the ESP8266 32-bit Tensilica L106 microcontroller running at 80/160 MHz, with integrated USB-UART, 4MB Flash, and 30 breadboard-friendly pins.
Raspberry Pi Pico (RP2040)
High-performance microcontroller board built around the Raspberry Pi RP2040 dual-core ARM Cortex-M0+ processor at 133 MHz with 2MB QSPI flash, 26 multifunction GPIOs, 3 ADCs, and Programmable I/O (PIO).
Raspberry Pi Pico W (Wi-Fi & Bluetooth)
High-performance wireless microcontroller board built around the RP2040 dual-core ARM Cortex-M0+ processor and an Infineon CYW43439 wireless chip supporting 2.4GHz 802.11n Wi-Fi 4 and Bluetooth 5.2 (BLE). Features 26 multifunction GPIOs, 3 ADC channels, 2MB onboard flash, and 8 Programmable I/O (PIO) state machines.
Raspberry Pi 4 Model B
Popular single-board computer featuring a 1.5 GHz 64-bit quad-core ARM Cortex-A72 processor (Broadcom BCM2711), dual 4K micro-HDMI, Gigabit Ethernet, USB 3.0, and 40-pin GPIO header.
Raspberry Pi 5
Latest single-board computer featuring a 2.4 GHz 64-bit quad-core ARM Cortex-A76 processor (Broadcom BCM2712), dual micro-HDMI, Gigabit Ethernet, USB 3.0, PCIe 2.0 x1, and 40-pin GPIO header.
STM32F103C8T6 'Blue Pill' Board
Popular low-cost 32-bit ARM Cortex-M3 development board featuring 72 MHz clock, 64KB Flash, 20KB SRAM, USB 2.0 Full Speed, and 40 breadboard-friendly pins.
PJRC Teensy 4.0 (ARM Cortex-M7)
Ultra high-performance development board featuring an ARM Cortex-M7 processor at 600 MHz (NXP i.MX RT1062), 2048K Flash, 1024K RAM, 40 total I/O pins, and hardware floating-point support.
ATmega328P 8-Bit AVR Microcontroller (DIP-28)
20MHz, 32kB Flash, 2kB SRAM, 1kB EEPROM, DIP-28
ATmega328P 8-Bit AVR Microcontroller
High performance, low power 8-bit AVR RISC-based microcontroller with 32KB flash, standard on Arduino Nano and Uno.
ATmega32U4 8-Bit Microcontroller with USB (TQFP-44)
16MHz, 32kB Flash, 2.5kB SRAM, 1kB EEPROM, USB 2.0, TQFP-44
ATtiny85 8-Bit AVR Microcontroller (DIP-8)
20MHz, 8kB Flash, 512B SRAM, 512B EEPROM, debugWIRE, DIP-8
ATtiny84 8-Bit AVR Microcontroller (DIP-14)
20MHz, 8kB Flash, 512B SRAM, 512B EEPROM, debugWIRE, DIP-14
ATtiny13 8-Bit AVR Microcontroller (DIP-8)
20MHz, 1kB Flash, 64B SRAM, 64B EEPROM, debugWIRE, DIP-8
PIC16F886 28-Pin Flash Microcontroller with nanoWatt (DIP-28)
8K Flash, 256B SRAM, 256B EEPROM, XLP, DIP28
BME280 Environmental Sensor Module
Precision digital environmental sensor measuring relative humidity, barometric pressure, and ambient temperature via I2C and SPI interfaces.
BMP280 Digital Barometric Pressure Sensor
High-precision, low-power digital barometric pressure and temperature sensor with I2C/SPI interface, commonly used for altitude estimation and weather stations.
MAX31855 Cold-Junction Compensated Thermocouple-to-Digital Converter
Precision thermocouple-to-digital converter with a built-in 14-bit analog-to-digital converter (ADC) and cold-junction compensation. Resolves temperatures from -270°C to +1800°C with 0.25°C resolution via a read-only SPI-compatible interface.
MAX6675 K-Thermocouple-to-Digital Converter
Cold-junction-compensated K-thermocouple-to-digital converter with 12-bit SPI read-only output resolving temperatures from 0°C to +1024°C with 0.25°C resolution.
MCP3008 8-Channel 10-Bit ADC with SPI Interface
Popular 8-channel 10-bit analog-to-digital converter (ADC) with SPI serial interface, 200 ksps sampling rate at 5V, and programmable pseudo-differential inputs.
MCP4921 12-Bit DAC with SPI Interface
Single-channel 12-bit Digital-to-Analog Converter (DAC) with an internal output amplifier and high-speed SPI serial interface (up to 20 MHz). Features user-selectable gain (1x or 2x) and selectable external voltage reference input.
MCP23S17 16-Bit I/O Expander with SPI Interface
16-bit general purpose parallel I/O port expander with high-speed 10 MHz SPI interface, hardware address pins for sharing the same SPI bus, and interrupt outputs.
MAX7219 8-Digit LED Display Driver
Compact, serial input/output common-cathode display driver interfacing microprocessors to 7-segment numeric LED displays up to 8 digits, bar-graph displays, or 64 individual LEDs.
TLC5940 16-Channel LED Driver with Dot Correction
16-channel constant-current LED driver with 12-bit PWM grayscale control and 6-bit dot correction per channel. Supports daisy-chaining via serial interface for large LED arrays.
nRF24L01+ 2.4GHz Wireless Transceiver Module
Ultra low-power 2Mbps 2.4 GHz RF transceiver with Enhanced ShockBurst hardware protocol accelerator and 2x4 (8-pin) male header.
RC522 13.56 MHz RFID / NFC Reader Module (MFRC522)
Popular contactless 13.56 MHz RFID reader/writer module based on the MFRC522 IC, supporting ISO/IEC 14443 A / MIFARE cards via SPI interface.
SSD1306 0.96" I2C / SPI OLED Display Module
Standard monochrome 128x64 dot matrix OLED display module driven by the SSD1306 controller with built-in charge pump and support for 4-pin I2C and 7-pin SPI pinouts.
SD Card Interface
Standard 9-pin full-size Secure Digital (SD/SDHC/SDXC) memory card interface and host socket supporting SDIO 4-bit parallel bus mode and 1-bit SPI serial bus mode with physical write-protect lock switch.
microSD Card Interface
Standard 8-pin microSD memory card interface supporting SDIO 4-bit parallel bus mode and 1-bit SPI serial bus mode for microcontrollers and embedded systems.
25LC256 / 25LCxxx SPI Serial EEPROM Family
SPI Serial EEPROM family (25LC010A–25LC1024), 1.8–5.5V, DIP-8/SOIC-8/TSSOP-8. Pinout identical across the family.
W25Q32JV 32Mbit SPI NOR Flash Memory
3V, 32M-bit (4M-byte) Serial NOR Flash memory with dual/quad SPI, used for external firmware/data storage on ESP32, Arduino and FPGA boards.
Winbond W25Q128JWS (SOIC-8 / WSON-8)
1.8V 128M-bit (16M-byte) Serial NOR Flash memory with Dual/Quad SPI in 8-pin SOIC 208-mil and 8-pad WSON packages. Standard IQ series with factory-fixed Quad Enable (QE=1) and JEDEC ID 6018h.
Winbond W25Q256JW (WSON-8)
1.8V 256M-bit (32M-byte) Serial NOR Flash memory with Dual/Quad SPI in 8-pad WSON package (6x5mm / 8x6mm). Standard IQ series with factory-fixed Quad Enable (QE=1) and JEDEC ID 6019h.
Macronix MX25L25645G (SOP-8 / WSON-8)
3V 256M-bit (32M-byte) CMOS MXSMIO Multi-I/O Serial NOR Flash in 8-pin SOP 200-mil and 8-land WSON packages. Supports Single/Dual/Quad I/O, QPI, DTR mode up to 133MHz, JEDEC ID C2h 2019h.