Pinouts & Pin References
for ICs & Semiconductors.
Pinout diagrams for timers, op-amps, logic gates, voltage regulators, and driver ICs.
All Boards, Chips & Connectors
Development platforms, microcontrollers, ICs and standard interfaces
CD4017B Decade Counter with 10 Decoded Outputs
5-stage Johnson counter with 10 decoded outputs. Advances on rising clock edge. 3–18V supply. Used in LED chasers, sequencers, and frequency dividers.
CD4066B Quad Bilateral Analog Switch
Four independent bidirectional analog switches. Each switch passes analog or digital signals in both directions when the control input is HIGH. 3–18V supply, Ron typically 80Ω.
CH340G USB to Serial UART Bridge Controller
USB serial converter, UART, SOIC-16
DHT11 Humidity and Temperature Sensor Module
3.3V to 5.5V, temperature and humidity module, DHT11
DHT22 / AM2302 Digital Humidity and Temperature Sensor
Capacitive humidity and temperature sensor with a single-wire proprietary digital interface (NOT I2C). 3.3–5.5V supply. Accuracy: ±2% RH, ±0.5°C. Requires a 10kΩ pull-up on the DATA line.
DS1307 64 x 8 Serial Real-Time Clock (I2C)
64 x 8, Serial, I2C Real-time clock, 4.5V to 5.5V VCC, 0°C to +70°C, DIP-8
DS3231 Extremely Accurate I2C Integrated RTC/TCXO/Crystal
Extremely Accurate I2C-Integrated RTC/TCXO/Crystal SOIC-16
FT232RL USB to Serial UART Interface IC
USB to Serial Interface, SSOP-28
IRF540N 100V Single N-Channel HEXFET Power MOSFET
Advanced HEXFET Power MOSFET utilizing advanced processing techniques to achieve extremely low on-resistance (44 mOhm) and fast switching speeds up to 100V and 33A continuous drain current.
IRLZ44N 55V Logic-Level N-Channel HEXFET Power MOSFET
5th Generation HEXFET logic-level gate drive power MOSFET fully specified at 4V and 5V gate drive for direct microcontroller driving (Arduino, ESP32, Raspberry Pi) with 47A rating.
L293 Quadruple Half-H Drivers
Quadruple Half-H motor driver IC providing four independently controlled half-bridge outputs rated 600mA each; no internal flyback diodes (add external diodes for inductive loads).
L298N Dual Full-Bridge Driver
Dual full-bridge motor driver in Multiwatt-15 package, rated for up to 46V and 2A continuous per bridge (4A peak). No internal flyback diodes, add external diodes for inductive loads.
LM311 Voltage Comparator with Strobe
Voltage Comparator, DIP-8/SOIC-8
LM317 Adjustable Positive Voltage Regulator
1.5A 35V Adjustable Linear Regulator, TO-220
LM324 Low-Power Quad Operational Amplifier
Low-Power, Quad-Operational Amplifiers, DIP-14/SOIC-14/SSOP-14
Frequently Asked Questions & Transparency
Helpful information about data sources, usage, and privacy
Where does the pinout data and technical specification come from?
The pinout data and technical specifications are based on official manufacturer datasheets as well as publicly available documentation and community resources. As PinoutDatabase is an independent project maintained by me as an individual, I strive for high accuracy, though inadvertent mistakes can still happen.
Can I use the graphics and how are they created?
The SVG vector files and PNG graphics are free to download and use for private/personal purposes. Depending on the component, the diagrams are either crafted manually or generated automatically based on package footprint and pin definitions.
Found an error or missing a component? How can I give feedback?
Community feedback is always appreciated! If you spot an error or are missing a specific component, please use the 'Report Issue' button directly on that component's page or send me a message via the contact form.
Is the site free to use and how is privacy handled?
Currently, using PinoutDatabase is completely free and requires no registration. All interactive web tools run entirely client-side inside your browser. Detailed information regarding data processing can be found directly on our Privacy Policy page.