The Interactive Database for
Pinouts & Hardware Diagrams.

Interactive diagrams, pin functions and links to technical datasheets for microcontrollers, dev boards, and ICs at a glance.

377+ components available

All Boards, Chips & Connectors

Development platforms, microcontrollers, ICs and standard interfaces

Chip
Texas Instruments

74HC374 Octal Edge-Triggered D-Type Flip-Flop with 3-State Outputs

Octal edge-triggered D-type flip-flop with 3-state true outputs. Data is transferred to outputs on the low-to-high transition of the clock pulse.

Chip
Texas Instruments

ADC0804 8-Bit Microprocessor Compatible A/D Converter

8-bit successive approximation analog-to-digital converter designed to interface directly with microprocessor buses via tri-state outputs and control strobes (~RD, ~WR).

Chip
Texas Instruments

CD4001B CMOS Quad 2-Input NOR Gate

Standard CMOS quad 2-input NOR gate with buffered outputs. Wide supply voltage range from 3V to 18V with high noise immunity.

Chip
Texas Instruments

CD4020B CMOS 14-Stage Binary Ripple Counter

14-stage binary ripple counter with master reset. Outputs available from stages 1 and 4 through 14 (stages 2 and 3 are not pinned out). Suitable for long-delay timers.

Chip
Texas Instruments

CD4040B CMOS 12-Stage Binary Ripple Counter

12-stage binary ripple counter with master reset. Advances one count on the negative-going transition of each clock pulse. Common for frequency dividers and timers.

Chip
Texas Instruments

CD4050B CMOS Hex Non-Inverting Buffer / Converter

Hex non-inverting buffer intended for logic-level conversion. Allowed to have input signal voltages up to 15V exceeding the supply voltage (e.g. 5V to 3.3V translation).

Chip
Texas Instruments

CD4069UB CMOS Hex Unbuffered Inverter

CMOS hex unbuffered inverter constructed with complementary MOS transistors. Single-stage design makes it ideal for linear oscillators, amplifiers, and audio synthesis.

Chip
Texas Instruments

DAC0808 8-Bit Multiplying D/A Converter

Classic 8-bit monolithic digital-to-analog converter featuring high speed multiplying capability (150ns settling time) and direct interface with TTL, DTL, and CMOS logic.

Chip
STMicroelectronics

TEA2025B Stereo Audio Power Amplifier

Monolithic dual audio power amplifier designed for portable radio cassette players and multimedia desktop speakers. Delivers 2.3W per channel in stereo or 4.7W in Bridge-Tied Load (BTL) configuration.

Chip
Texas Instruments

74HC139 Dual 2-to-4 Line Decoder/Demultiplexer

High-speed silicon-gate CMOS dual 2-to-4 line decoder/demultiplexer. Features active-low enable inputs and active-low decoded outputs. Ideal for memory address decoding.

Chip
Texas Instruments

74HC153 Dual 4-to-1 Line Data Selector/Multiplexer

Dual 4-line to 1-line data selector/multiplexer with common select inputs and separate active-low enable inputs for each section.

Chip
Texas Instruments

74HC157 Quad 2-Line to 1-Line Data Selector/Multiplexer

Quad 2-line to 1-line multiplexer with non-inverting outputs, common select input, and common active-low strobe/enable.

Chip
Texas Instruments

74HC161 Synchronous 4-Bit Binary Counter (Asynchronous Clear)

Synchronous presettable 4-bit binary counter with asynchronous master reset, look-ahead carry outputs, and synchronous parallel loading.

Chip
Infineon

1EDN7550B Single-channel high/low-side gate driver

Single-channel high-side and low-side gate driver with high-CMR truly differential inputs (TDI). Output source 4 A/0.85 ohm, sink 8 A/0.35 ohm. PG-SOT23-6 package.

Chip
Microchip

24AA02E48 I2C Serial EEPROM

2-wire I2C serial EEPROM, 1.7V to 5.5V supply. Open-drain SDA bidirectional data pin requires pull-up to VCC; SCL serial clock input.

Frequently Asked Questions & Transparency

Helpful information about data sources, usage, and privacy

Where does the pinout data and technical specification come from?

The pinout data and technical specifications are based on official manufacturer datasheets as well as publicly available documentation and community resources. As PinoutDatabase is an independent project maintained by me as an individual, I strive for high accuracy, though inadvertent mistakes can still happen.

Can I use the graphics and how are they created?

The SVG vector files and PNG graphics are free to download and use for private/personal purposes. Depending on the component, the diagrams are either crafted manually or generated automatically based on package footprint and pin definitions.

Found an error or missing a component? How can I give feedback?

Community feedback is always appreciated! If you spot an error or are missing a specific component, please use the 'Report Issue' button directly on that component's page or send me a message via the contact form.

Is the site free to use and how is privacy handled?

Currently, using PinoutDatabase is completely free and requires no registration. All interactive web tools run entirely client-side inside your browser. Detailed information regarding data processing can be found directly on our Privacy Policy page.