Pinouts & Pin-Belegungen
für ICs & Halbleiter.

Pinout-Übersichten für Timer, Operationsverstärker, Logikgatter, Spannungswandler und Treiber-ICs.

Bereits 377+ Bauteile verfügbar

Alle Boards, Chips & Stecker

Entwicklungsplattformen, Mikrocontroller, ICs und Standard-Schnittstellen

Chip
Texas Instruments

CD4050B CMOS Hex Non-Inverting Buffer / Converter

Hex non-inverting buffer intended for logic-level conversion. Allowed to have input signal voltages up to 15V exceeding the supply voltage (e.g. 5V to 3.3V translation).

Chip
Texas Instruments

CD4069UB CMOS Hex Unbuffered Inverter

CMOS hex unbuffered inverter constructed with complementary MOS transistors. Single-stage design makes it ideal for linear oscillators, amplifiers, and audio synthesis.

Chip
Texas Instruments

DAC0808 8-Bit Multiplying D/A Converter

Classic 8-bit monolithic digital-to-analog converter featuring high speed multiplying capability (150ns settling time) and direct interface with TTL, DTL, and CMOS logic.

Chip
STMicroelectronics

TEA2025B Stereo Audio Power Amplifier

Monolithic dual audio power amplifier designed for portable radio cassette players and multimedia desktop speakers. Delivers 2.3W per channel in stereo or 4.7W in Bridge-Tied Load (BTL) configuration.

Chip
Texas Instruments

74HC139 Dual 2-to-4 Line Decoder/Demultiplexer

High-speed silicon-gate CMOS dual 2-to-4 line decoder/demultiplexer. Features active-low enable inputs and active-low decoded outputs. Ideal for memory address decoding.

Chip
Texas Instruments

74HC153 Dual 4-to-1 Line Data Selector/Multiplexer

Dual 4-line to 1-line data selector/multiplexer with common select inputs and separate active-low enable inputs for each section.

Chip
Texas Instruments

74HC157 Quad 2-Line to 1-Line Data Selector/Multiplexer

Quad 2-line to 1-line multiplexer with non-inverting outputs, common select input, and common active-low strobe/enable.

Chip
Texas Instruments

74HC161 Synchronous 4-Bit Binary Counter (Asynchronous Clear)

Synchronous presettable 4-bit binary counter with asynchronous master reset, look-ahead carry outputs, and synchronous parallel loading.

Chip
Infineon

1EDN7550B Single-channel high/low-side gate driver

Single-channel high-side and low-side gate driver with high-CMR truly differential inputs (TDI). Output source 4 A/0.85 ohm, sink 8 A/0.35 ohm. PG-SOT23-6 package.

Chip
Microchip

24AA02E48 I2C Serial EEPROM

2-wire I2C serial EEPROM, 1.7V to 5.5V supply. Open-drain SDA bidirectional data pin requires pull-up to VCC; SCL serial clock input.

Chip
Infineon

2EDL8023G3CXTMA1 120 V High and Low Side Gate Driver

120 V boot, 3 A/4 A junction-isolated high-side and low-side gate driver IC, 2EDL8x2x family. Source 3 A/4 A, sink 5 A high-side and 6 A low-side. TTL inputs.

Chip
Analog Devices

AD5693R I2C Voltage-Output DAC

Rail-to-rail voltage-output DAC with I2C serial interface, 2.7 V to 5.5 V supply, VLOGIC digital supply option, and internal reference output on VREF. 10-lead MSOP pinout.

Chip
Analog Devices

AD7173-8 Analog-to-Digital Converter

Multichannel sigma-delta ADC with 16 analog inputs, cross point mux, internal 2.5 V reference, serial interface (SCLK, DIN, DOUT/RDY, ~CS), AVDD1/AVDD2/IOVDD supplies, exposed pad to AVSS.

Chip
Analog Devices

AD7685 16-bit SAR ADC

16-bit SAR ADC with pseudo-differential analog input (IN+/IN-), external reference REF, and serial interface (CNV, SCK, SDI, SDO). VIO sets the digital interface supply.

Chip
Analog Devices

AD8421 Gain-Set Differential Amplifier

Amplifier with RG gain-set terminals, G = 1 + (9.9 kOhm / RG), REF terminal for output level shift, +VS/-VS supplies. Shown in 8-lead SOIC, MSOP and LFCSP packages.

Häufige Fragen & Transparenz

Wissenswertes zu Datenquellen, Nutzung und Datenschutz

Woher stammen die Pinout-Daten und Spezifikationen?

Die Pinout-Daten und technischen Angaben basieren auf den Datenblättern der jeweiligen Hersteller sowie frei zugänglichen Dokumentationen und öffentlichen Quellen. Da PinoutDatabase ein unabhängiges Projekt ist, das ich als Einzelperson pflege, gebe ich mein Bestes für hohe Genauigkeit, Fehler können aber natürlich vorkommen.

Darf ich die Grafiken nutzen und wie werden sie erstellt?

Die SVG-Vektordateien und PNG-Grafiken dürfen für private Zwecke frei heruntergeladen und verwendet werden. Die Diagramme erstelle ich je nach Bauteil entweder manuell oder generiere sie automatisiert anhand der jeweiligen Gehäuse-Bauform und Pinbelegung.

Fehler entdeckt oder ein Bauteil fehlt? Wie kann ich Feedback geben?

Feedback aus der Community ist sehr willkommen! Wenn du einen Fehler entdeckst oder ein bestimmtes Bauteil vermisst, nutze einfach den 'Fehler melden'-Button direkt auf der jeweiligen Bauteilseite oder schreibe mir eine Nachricht über das Kontaktformular.

Ist die Nutzung kostenlos und wie steht es um den Datenschutz?

Aktuell ist die Nutzung von PinoutDatabase komplett kostenlos und ohne Registrierung möglich. Alle interaktiven Web-Tools laufen rein clientseitig in deinem Browser. Ausführliche Details zur Datenverarbeitung findest du direkt auf der Datenschutzseite.