Die interaktive Datenbank für
Pinouts & Pin-Belegungen.

Interaktive Diagramme, Pin-Funktionen und technische Datenblätter für Mikrocontroller, Entwicklungsboards und ICs auf einen Blick.

Bereits 276+ Bauteile verfügbar

Alle Boards, Chips & Stecker

Entwicklungsplattformen, Mikrocontroller, ICs und Standard-Schnittstellen

Connector
JST (Japan Solderless Terminal Mfg. Co.)

JST-PH 2-Pin Battery Connector (2.0mm Pitch)

2.0mm pitch, 2-position wire-to-board connector, the de-facto standard for single-cell LiPo/Li-Ion battery packs on hobbyist electronics and charge modules such as the TP4056.

Chip
Texas Instruments / National Semiconductor

LM3914 Dot/Bar Display Driver

Monolithic IC that senses analog voltage levels and drives 10 LEDs in a linear dot or bar graph display. Internal voltage reference and precision voltage divider included.

Chip
Maxim Integrated (Analog Devices)

MAX98357A I2S Class-D Mono Amplifier

3W Class-D mono audio amplifier with a digital I2S/PDM input and integrated DAC, requiring no analog audio input, commonly paired with the ESP32/Raspberry Pi for I2S speaker output.

Connector
HDMI Forum / HDMI Licensing Administrator

Micro HDMI (Type D) 19-Pin Interface

Miniaturized 19-pin HDMI connector (Type D) with the same electrical signal assignment as HDMI Type-A, used on cameras, tablets, and single-board computers like the Raspberry Pi Zero and Pi 4.

Connector
USB Implementers Forum (USB-IF)

Micro-USB 3.0 Type-B (10-Pin)

10-pin SuperSpeed USB 3.0 Micro-B connector combining a standard 5-pin USB 2.0 section with an additional 5-pin SuperSpeed section, commonly found on portable external hard drives.

Connector
VESA (Video Electronics Standards Association)

Mini DisplayPort (mDP) 20-Pin Interface

Miniaturized 20-pin DisplayPort connector introduced by Apple and later standardized by VESA, electrically identical to full-size DisplayPort and reused as the physical connector for Thunderbolt 1 and 2.

Connector
USB-IF (USB Implementers Forum)

Mini-USB Type-B 5-Pin Interface

Compact 5-pin USB 2.0 connector commonly found on older digital cameras, GPS devices, MP3 players, and game controllers. Succeeded by Micro-USB.

Chip
NXP Semiconductors

PCF8563 Real-Time Clock/Calendar

Low-power CMOS Real-Time Clock/Calendar with I2C interface, programmable clock output, alarm and timer functions, backed by a 32.768kHz crystal oscillator.

Chip
NXP Semiconductors

PCF8575 16-Bit I2C I/O Expander

Remote 16-bit I2C-bus general purpose parallel input/output expander with interrupt output, offering quasi-bidirectional I/O across two 8-bit ports (P0, P1), the 16-bit sibling of the PCF8574.

Connector
PCI-SIG (Molex Mini-Fit Jr. Style)

PCIe 6-Pin GPU Power Connector

6-pin auxiliary power connector defined by the PCI Express Power Supply Specification, supplying up to 75W (3x +12V, 3x GND) to graphics cards in addition to the PCIe slot's own 75W.

Connector
IBM / DIN

PS/2 (Mini-DIN 6) Keyboard/Mouse Connector

6-pin Mini-DIN connector introduced with the IBM PS/2 for keyboard and mouse interfaces. Uses synchronous serial protocol with clock and data lines. Purple = keyboard, green = mouse.

Connector
Centronics / IEEE 1284

Parallel Port (DB-25 / LPT Interface)

Standard 25-pin D-Sub parallel interface for printers and peripherals. Pin 1 is Strobe, pins 2–9 are bidirectional 8-bit data lines (SPP/EPP/ECP modes), pins 10–13 and 15 are status inputs, pins 14/16/17 are control outputs, and pins 18–25 are signal ground.

Connector
Radio Corporation of America (RCA)

RCA (Phono) Composite Connector

Single-conductor friction-fit coaxial connector, colour-coded yellow for composite video or red/white for stereo analog audio, ubiquitous on consumer AV equipment.

Connector
TIA / EIA (Telecommunications Industry Association)

RJ11 6P4C Modular Connector (Telephone)

6-position 4-contact modular connector used for analog telephone lines, DSL connections, and fax machines. Smaller than RJ45 with 6mm width.

Chip
Sensirion AG

SHT31-D Digital Temperature & Humidity Sensor

High-accuracy, fully calibrated digital I2C temperature and humidity sensor with two selectable addresses and an ALERT pin for humidity/temperature threshold monitoring.

Häufige Fragen & Transparenz

Wissenswertes zu Datenquellen, Nutzung und Datenschutz

Woher stammen die Pinout-Daten und Spezifikationen?

Die Pinout-Daten und technischen Angaben basieren auf den Datenblättern der jeweiligen Hersteller sowie frei zugänglichen Dokumentationen und öffentlichen Quellen. Da PinoutDatabase ein unabhängiges Projekt ist, das ich als Einzelperson pflege, gebe ich mein Bestes für hohe Genauigkeit, Fehler können aber natürlich vorkommen.

Darf ich die Grafiken nutzen und wie werden sie erstellt?

Die SVG-Vektordateien und PNG-Grafiken dürfen für private Zwecke frei heruntergeladen und verwendet werden. Die Diagramme erstelle ich je nach Bauteil entweder manuell oder generiere sie automatisiert anhand der jeweiligen Gehäuse-Bauform und Pinbelegung.

Fehler entdeckt oder ein Bauteil fehlt? Wie kann ich Feedback geben?

Feedback aus der Community ist sehr willkommen! Wenn du einen Fehler entdeckst oder ein bestimmtes Bauteil vermisst, nutze einfach den 'Fehler melden'-Button direkt auf der jeweiligen Bauteilseite oder schreibe mir eine Nachricht über das Kontaktformular.

Ist die Nutzung kostenlos und wie steht es um den Datenschutz?

Aktuell ist die Nutzung von PinoutDatabase komplett kostenlos und ohne Registrierung möglich. Alle interaktiven Web-Tools laufen rein clientseitig in deinem Browser. Ausführliche Details zur Datenverarbeitung findest du direkt auf der Datenschutzseite.