Die interaktive Datenbank für
Pinouts & Pin-Belegungen.
Interaktive Diagramme, Pin-Funktionen und technische Datenblätter für Mikrocontroller, Entwicklungsboards und ICs auf einen Blick.
Alle Boards, Chips & Stecker
Entwicklungsplattformen, Mikrocontroller, ICs und Standard-Schnittstellen
ATX12V 4-Pin CPU Power Connector (P4)
4-pin auxiliary +12V connector defined by the ATX12V specification, supplying dedicated power to the CPU voltage regulator on motherboards, the predecessor to the 8-pin EPS12V connector.
BC547 NPN General Purpose Transistor
General purpose NPN silicon transistor for switching and amplifier applications. Max 45V VCE, 100mA IC, 500mW. European standard equivalent to 2N3904.
BMP280 Digital Barometric Pressure Sensor
High-precision, low-power digital barometric pressure and temperature sensor with I2C/SPI interface, commonly used for altitude estimation and weather stations.
BNC Coaxial Connector
Bayonet-locking RF coaxial connector with 50 Ohm or 75 Ohm impedance. Used for oscilloscope probes, test equipment, composite video, CCTV, 10BASE2 Ethernet, and RF applications up to 4 GHz.
BQ24074 LiPo Charger with Power Path Management
Single-cell Li-Ion/LiPo linear charger with autonomous power-path management, allowing the system to run directly from USB/DC input while simultaneously charging the battery.
CD74HC4067 16-Channel Analog Multiplexer/Demultiplexer
High-speed CMOS 16-channel analog multiplexer/demultiplexer with low on-resistance (typ. 70 Ohm) and wide analog voltage range. Ideal for data acquisition and signal routing.
DC Barrel Power Jack (5.5x2.1mm)
Standard coaxial DC power jack (5.5mm outer / 2.1mm inner diameter, center-positive) used to supply external power to boards and adapters. Common breadboard-mount versions add a third normally-closed switch contact for power-source detection.
DIN-5 (180) MIDI Connector
5-pin 180-degree DIN connector used for MIDI (Musical Instrument Digital Interface) communication at 31.25 kBaud. Only pins 2, 4, 5 are used for MIDI; pins 1, 3 reserved.
DVI-D Dual Link Digital Video Connector
Dual-link DVI-D connector with all 24 digital signal pins populated for two TMDS links. Supports resolutions up to 2560x1600 at 60Hz by doubling the available bandwidth.
DVI-D Single Link Digital Video Connector
Digital-only DVI connector with 24 signal pins plus 1 ground blade for single-link TMDS signaling. Supports resolutions up to 1920x1200 at 60Hz (single link) or 2560x1600 (dual link).
DVI-I Dual Link Integrated (Digital + Analog) Video Connector
Full-featured 29-pin DVI connector with dual TMDS links and analog VGA signals. Supports digital resolutions up to 2560x1600 at 60Hz and analog VGA via passive adapter.
DVI-I Single Link Integrated (Digital + Analog) Video Connector
Integrated DVI connector carrying both digital TMDS and analog VGA signals. 24 digital pins plus 5 analog pins (4 analog contacts + 1 ground blade). Supports single-link resolutions up to 1920x1200 at 60Hz.
IDC 40-Pin ATA/IDE Ribbon Header
40-pin insulation-displacement (IDC) header for Parallel ATA (PATA/IDE) ribbon cables, carrying a 16-bit data bus and control signals between the host controller and hard disk / optical drives.
INA226 Precision Current/Power Monitor
Bidirectional current, voltage, and power monitor with I2C/SMBus interface and a programmable alert pin, offering higher resolution and accuracy than the popular INA219.
IRF3205 55V Single N-Channel HEXFET Power MOSFET
High-current N-channel HEXFET Power MOSFET with extremely low on-resistance (8 mOhm typ.) for high-efficiency switching. 55V VDSS, 110A continuous drain current.
Häufige Fragen & Transparenz
Wissenswertes zu Datenquellen, Nutzung und Datenschutz
Woher stammen die Pinout-Daten und Spezifikationen?
Die Pinout-Daten und technischen Angaben basieren auf den Datenblättern der jeweiligen Hersteller sowie frei zugänglichen Dokumentationen und öffentlichen Quellen. Da PinoutDatabase ein unabhängiges Projekt ist, das ich als Einzelperson pflege, gebe ich mein Bestes für hohe Genauigkeit, Fehler können aber natürlich vorkommen.
Darf ich die Grafiken nutzen und wie werden sie erstellt?
Die SVG-Vektordateien und PNG-Grafiken dürfen für private Zwecke frei heruntergeladen und verwendet werden. Die Diagramme erstelle ich je nach Bauteil entweder manuell oder generiere sie automatisiert anhand der jeweiligen Gehäuse-Bauform und Pinbelegung.
Fehler entdeckt oder ein Bauteil fehlt? Wie kann ich Feedback geben?
Feedback aus der Community ist sehr willkommen! Wenn du einen Fehler entdeckst oder ein bestimmtes Bauteil vermisst, nutze einfach den 'Fehler melden'-Button direkt auf der jeweiligen Bauteilseite oder schreibe mir eine Nachricht über das Kontaktformular.
Ist die Nutzung kostenlos und wie steht es um den Datenschutz?
Aktuell ist die Nutzung von PinoutDatabase komplett kostenlos und ohne Registrierung möglich. Alle interaktiven Web-Tools laufen rein clientseitig in deinem Browser. Ausführliche Details zur Datenverarbeitung findest du direkt auf der Datenschutzseite.