Pinouts & Pin References
for Connectors & Ports.

Pinout diagrams for USB-C, HDMI, DisplayPort, Ethernet RJ45, SATA, M.2, ATX & audio jacks.

276+ components available

All Boards, Chips & Connectors

Development platforms, microcontrollers, ICs and standard interfaces

Connector
Intel / Formfactors.org

4-Pin PWM PC Fan Connector

Standard 4-pin 2.54mm pitch polarized motherboard connector for PC cooling fans featuring Ground, +12V DC power, Tachometer RPM feedback pulse, and 25 kHz PWM speed control.

Connector
Intel / Molex (Mini-Fit Jr.)

ATX 24-Pin Motherboard Power Supply

Standard 24-pin dual-row power connector defined in ATX12V 2.0+ specifications providing +3.3V, +5V, +12V, -12V, +5VSB standby power, PS_ON# power switch, and PWR_OK signal.

Connector
USB-IF (USB Implementers Forum)

Micro-USB Type-B 5-Pin Interface

Compact 5-pin USB 2.0 connector with dedicated OTG ID pin for dynamic host/device mode negotiation.

Connector
PCI-SIG

PCI Express 8-Pin Power Connector

Standard 8-pin PCIe power connector for high-performance graphics cards (GPUs). Delivers up to 150W of +12V power via 3 main +12V rails, 3 Ground rails, and 2 Sense detection pins.

Connector
SD Association

SD Card Interface

Standard 9-pin full-size Secure Digital (SD/SDHC/SDXC) memory card interface and host socket supporting SDIO 4-bit parallel bus mode and 1-bit SPI serial bus mode with physical write-protect lock switch.

Connector
SATA-IO (Serial ATA International Organization)

Serial ATA (SATA) 15-Pin Power Connector

Standard 15-pin power interface for SATA drives delivering +3.3V, +5V, +12V DC power lines with staggered pre-charge contacts for hot-plugging.

Connector
IBM / VESA

VGA (DE-15 / D-Sub 15-Pin Interface)

Standard 15-pin 3-row D-Sub connector for analog RGB component video signals, horizontal/vertical synchronization, and DDC2B (I2C) display communication.

Connector
CTIA / OMTP (Telecommunications Standard)

3.5mm TRRS 4-Pole Audio/Headset Jack

Standard 3.5mm (1/8") 4-conductor miniature audio connector for stereo audio output and microphone input (CTIA standard: Left, Right, Ground, Mic).

Connector
Apple Inc.

Apple Lightning Connector

Proprietary 8-pin reversible connector used for Apple iOS devices (iPhone, iPad, iPod) carrying power (VBUS), high-speed differential USB data, and accessory control signals.

Connector
SSIF / Intel

EPS12V 8-Pin CPU Power Connector

Standard 8-pin EPS12V motherboard power connector delivering high-current +12V DC power directly to the CPU VRM voltage regulator module (up to 336W).

Connector
TIA / EIA (Telecommunications Industry Association)

RJ45 8P8C Modular Connector (Ethernet)

8-position 8-contact modular connector for twisted pair Ethernet networking (10Base-T, 100Base-TX, 1000Base-T Gigabit, and Power over Ethernet / PoE).

Connector
EIA / TIA (Electronic Industries Alliance)

RS-232 Serial Port DB9 (DE-9)

Standard 9-pin D-Sub connector for asynchronous serial data communication (RS-232 / EIA-232) and industrial CAN bus interfaces.

Connector
SATA-IO (Serial ATA International Organization)

Serial ATA (SATA) 7-Pin Data Connector

Standard 7-pin L-shaped interface for high-speed serial storage devices (HDDs, SSDs, optical drives) up to SATA Revision 3.0 (6 Gbit/s).

Connector
SD Association

microSD Card Interface

Standard 8-pin microSD memory card interface supporting SDIO 4-bit parallel bus mode and 1-bit SPI serial bus mode for microcontrollers and embedded systems.

Connector
Molex

Molex 4-Pin LP4 Power Connector

Standard 4-pin LP4 peripheral power connector used for desktop PC drives, liquid cooling pumps, fans, and internal hardware (+12V and +5V rails).

Frequently Asked Questions & Transparency

Helpful information about data sources, usage, and privacy

Where does the pinout data and technical specification come from?

The pinout data and technical specifications are based on official manufacturer datasheets as well as publicly available documentation and community resources. As PinoutDatabase is an independent project maintained by me as an individual, I strive for high accuracy, though inadvertent mistakes can still happen.

Can I use the graphics and how are they created?

The SVG vector files and PNG graphics are free to download and use for private/personal purposes. Depending on the component, the diagrams are either crafted manually or generated automatically based on package footprint and pin definitions.

Found an error or missing a component? How can I give feedback?

Community feedback is always appreciated! If you spot an error or are missing a specific component, please use the 'Report Issue' button directly on that component's page or send me a message via the contact form.

Is the site free to use and how is privacy handled?

Currently, using PinoutDatabase is completely free and requires no registration. All interactive web tools run entirely client-side inside your browser. Detailed information regarding data processing can be found directly on our Privacy Policy page.