Die interaktive Datenbank für
Pinouts & Pin-Belegungen.
Interaktive Diagramme, Pin-Funktionen und technische Datenblätter für Mikrocontroller, Entwicklungsboards und ICs auf einen Blick.
Alle Boards, Chips & Stecker
Entwicklungsplattformen, Mikrocontroller, ICs und Standard-Schnittstellen
Raspberry Pi Compute Module Zero (CM0 / CM0Lite)
Compact 39mm x 33mm System-on-Module based on Raspberry Pi Zero 2 W with RP3A0 SiP (quad-core 64-bit BCM2837 @ 1GHz, 512MB LPDDR2, optional 8GB/16GB eMMC or Lite) featuring 132 castellated edge pins at 1mm pitch.
USB 2.0 Type-A Connector & Receptacle
Standard 4-contact USB 2.0 Type-A connector. Supports High-Speed (480 Mbps), Full-Speed (12 Mbps), and Low-Speed (1.5 Mbps) data transfer with 5V VBUS power delivery up to 500mA (2.5W).
MCP4725 12-Bit DAC with I2C Interface and EEPROM
Low-power, high accuracy, single channel, 12-bit voltage output Digital-to-Analog Converter (DAC) with integrated non-volatile EEPROM and 2-wire I2C interface. Stores power-on reset output settings directly in on-board EEPROM.
TXS0108E 8-Bit Bidirectional Voltage-Level Translator
8-bit non-inverting bidirectional logic voltage level translator with automatic direction sensing and output enable (OE). Allows seamless communication between mixed-voltage systems (e.g. 1.8V/3.3V microcontrollers and 5V sensors/peripherals) across high-speed I2C, SPI, and UART buses.
MCP4921 12-Bit DAC with SPI Interface
Single-channel 12-bit Digital-to-Analog Converter (DAC) with an internal output amplifier and high-speed SPI serial interface (up to 20 MHz). Features user-selectable gain (1x or 2x) and selectable external voltage reference input.
Macronix MX25L25645G (SOP-16)
3V 256M-bit (32M-byte) CMOS MXSMIO Multi-I/O Serial NOR Flash in 16-pin SOP 300-mil package. Features a dedicated hardware RESET# input on Pin 3 and NC/SIO3 on Pin 1.
Macronix MX25L25645G (SOP-8 / WSON-8)
3V 256M-bit (32M-byte) CMOS MXSMIO Multi-I/O Serial NOR Flash in 8-pin SOP 200-mil and 8-land WSON packages. Supports Single/Dual/Quad I/O, QPI, DTR mode up to 133MHz, JEDEC ID C2h 2019h.
OBD-II (SAE J1962) 16-Pin Vehicle Diagnostic Port
Standardized 16-pin diagnostic link connector (DLC) mandatory on all passenger vehicles in the US and Europe. Provides access to automotive bus communication including ISO 11898 High-Speed CAN, ISO 9141 K-Line, SAE J1850 PWM/VPW, and permanent +12V battery power.
PT2399 CMOS Echo / Delay Audio Processor
Single-chip CMOS echo and audio delay processor utilizing internal 44Kbit digital RAM with integrated ADC, DAC, and operational amplifiers. Widely used in guitar pedals, synthesizers, and karaoke equipment.
Winbond W25Q128JWF (SOIC-16)
1.8V 128M-bit (16M-byte) Serial NOR Flash memory with Dual/Quad SPI in 16-pin SOIC 300-mil package. Standard IQ series with factory-fixed Quad Enable (QE=1), dedicated hardware /RESET pin on Pin 3, and JEDEC ID 6018h.
Winbond W25Q128JWS (SOIC-8 / WSON-8)
1.8V 128M-bit (16M-byte) Serial NOR Flash memory with Dual/Quad SPI in 8-pin SOIC 208-mil and 8-pad WSON packages. Standard IQ series with factory-fixed Quad Enable (QE=1) and JEDEC ID 6018h.
Winbond W25Q256JW (WSON-8)
1.8V 256M-bit (32M-byte) Serial NOR Flash memory with Dual/Quad SPI in 8-pad WSON package (6x5mm / 8x6mm). Standard IQ series with factory-fixed Quad Enable (QE=1) and JEDEC ID 6019h.
Winbond W25Q256JWF (SOIC-16)
1.8V 256M-bit (32M-byte) Serial NOR Flash memory with Dual/Quad SPI in 16-pin SOIC 300-mil package. Standard IQ series with factory-fixed Quad Enable (QE=1), dedicated hardware /RESET input (Pin 3), and JEDEC ID 6019h.
MAX3232 3.0V-5.5V Dual RS-232 Transceiver
Two-channel line driver and receiver with ±15-kV ESD protection and internal charge pump for 3.0V to 5.5V operation. Meets EIA/TIA-232-F standards while operating directly from 3.3V microcontroller logic without external high voltage supplies.
SN754410 Quadruple Half-H Motor Driver
Quadruple high-current half-H driver designed to provide bidirectional drive currents of up to 1A at voltages from 4.5V to 36V. Pin-compatible higher-current modern alternative to the popular L293D with internal output clamp diodes for inductive transient suppression.
Häufige Fragen & Transparenz
Wissenswertes zu Datenquellen, Nutzung und Datenschutz
Woher stammen die Pinout-Daten und Spezifikationen?
Die Pinout-Daten und technischen Angaben basieren auf den Datenblättern der jeweiligen Hersteller sowie frei zugänglichen Dokumentationen und öffentlichen Quellen. Da PinoutDatabase ein unabhängiges Projekt ist, das ich als Einzelperson pflege, gebe ich mein Bestes für hohe Genauigkeit, Fehler können aber natürlich vorkommen.
Darf ich die Grafiken nutzen und wie werden sie erstellt?
Die SVG-Vektordateien und PNG-Grafiken dürfen für private Zwecke frei heruntergeladen und verwendet werden. Die Diagramme erstelle ich je nach Bauteil entweder manuell oder generiere sie automatisiert anhand der jeweiligen Gehäuse-Bauform und Pinbelegung.
Fehler entdeckt oder ein Bauteil fehlt? Wie kann ich Feedback geben?
Feedback aus der Community ist sehr willkommen! Wenn du einen Fehler entdeckst oder ein bestimmtes Bauteil vermisst, nutze einfach den 'Fehler melden'-Button direkt auf der jeweiligen Bauteilseite oder schreibe mir eine Nachricht über das Kontaktformular.
Ist die Nutzung kostenlos und wie steht es um den Datenschutz?
Aktuell ist die Nutzung von PinoutDatabase komplett kostenlos und ohne Registrierung möglich. Alle interaktiven Web-Tools laufen rein clientseitig in deinem Browser. Ausführliche Details zur Datenverarbeitung findest du direkt auf der Datenschutzseite.