Die interaktive Datenbank für
Pinouts & Pin-Belegungen.

Interaktive Diagramme, Pin-Funktionen und technische Datenblätter für Mikrocontroller, Entwicklungsboards und ICs auf einen Blick.

Bereits 276+ Bauteile verfügbar

Alle Boards, Chips & Stecker

Entwicklungsplattformen, Mikrocontroller, ICs und Standard-Schnittstellen

Chip
Texas Instruments / RCA

CD4017B Decade Counter with 10 Decoded Outputs

5-stage Johnson counter with 10 decoded outputs. Advances on rising clock edge. 3–18V supply. Used in LED chasers, sequencers, and frequency dividers.

Chip
Texas Instruments / RCA

CD4066B Quad Bilateral Analog Switch

Four independent bidirectional analog switches. Each switch passes analog or digital signals in both directions when the control input is HIGH. 3–18V supply, Ron typically 80Ω.

Chip
WCH (Jiangsu Qinheng)

CH340G USB to Serial UART Bridge Controller

USB serial converter, UART, SOIC-16

Chip
Aosong Electronics

DHT11 Humidity and Temperature Sensor Module

3.3V to 5.5V, temperature and humidity module, DHT11

Chip
Aosong Electronics

DHT22 / AM2302 Digital Humidity and Temperature Sensor

Capacitive humidity and temperature sensor with a single-wire proprietary digital interface (NOT I2C). 3.3–5.5V supply. Accuracy: ±2% RH, ±0.5°C. Requires a 10kΩ pull-up on the DATA line.

Module
Texas Instruments / Pololu

DRV8825 Stepper Motor Controller (StepStick)

High-current microstepping bipolar stepper driver with built-in indexing translator, supporting up to 2.5A peak per coil, 45V motor supply, and 1/32 microstepping.

Chip
Maxim Integrated / Analog Devices

DS1307 64 x 8 Serial Real-Time Clock (I2C)

64 x 8, Serial, I2C Real-time clock, 4.5V to 5.5V VCC, 0°C to +70°C, DIP-8

Chip
Maxim Integrated / Analog Devices

DS3231 Extremely Accurate I2C Integrated RTC/TCXO/Crystal

Extremely Accurate I2C-Integrated RTC/TCXO/Crystal SOIC-16

Chip
FTDI Chip

FT232RL USB to Serial UART Interface IC

USB to Serial Interface, SSOP-28

Sensor
ElecFreaks / SparkFun / Generic

HC-SR04 Ultrasonic Distance Sensor

Standard 4-pin ultrasonic distance measuring sensor providing 2 cm to 400 cm non-contact measurement with 3 mm ranging accuracy.

Sensor
Texas Instruments

INA219 High-Side Current & Power Sensor Module

Bidirectional current and power monitor with I2C-compatible interface, capable of measuring high-side voltages up to +26V and currents up to 3.2A with 0.1 ohm shunt.

Chip
Infineon / International Rectifier

IRF540N 100V Single N-Channel HEXFET Power MOSFET

Advanced HEXFET Power MOSFET utilizing advanced processing techniques to achieve extremely low on-resistance (44 mOhm) and fast switching speeds up to 100V and 33A continuous drain current.

Chip
Infineon / International Rectifier

IRLZ44N 55V Logic-Level N-Channel HEXFET Power MOSFET

5th Generation HEXFET logic-level gate drive power MOSFET fully specified at 4V and 5V gate drive for direct microcontroller driving (Arduino, ESP32, Raspberry Pi) with 47A rating.

Chip
STMicroelectronics / TI

L293 Quadruple Half-H Drivers

Quadruple Half-H motor driver IC providing four independently controlled half-bridge outputs rated 600mA each; no internal flyback diodes (add external diodes for inductive loads).

Chip
STMicroelectronics

L298N Dual Full-Bridge Driver

Dual full-bridge motor driver in Multiwatt-15 package, rated for up to 46V and 2A continuous per bridge (4A peak). No internal flyback diodes, add external diodes for inductive loads.

Häufige Fragen & Transparenz

Wissenswertes zu Datenquellen, Nutzung und Datenschutz

Woher stammen die Pinout-Daten und Spezifikationen?

Die Pinout-Daten und technischen Angaben basieren auf den Datenblättern der jeweiligen Hersteller sowie frei zugänglichen Dokumentationen und öffentlichen Quellen. Da PinoutDatabase ein unabhängiges Projekt ist, das ich als Einzelperson pflege, gebe ich mein Bestes für hohe Genauigkeit, Fehler können aber natürlich vorkommen.

Darf ich die Grafiken nutzen und wie werden sie erstellt?

Die SVG-Vektordateien und PNG-Grafiken dürfen für private Zwecke frei heruntergeladen und verwendet werden. Die Diagramme erstelle ich je nach Bauteil entweder manuell oder generiere sie automatisiert anhand der jeweiligen Gehäuse-Bauform und Pinbelegung.

Fehler entdeckt oder ein Bauteil fehlt? Wie kann ich Feedback geben?

Feedback aus der Community ist sehr willkommen! Wenn du einen Fehler entdeckst oder ein bestimmtes Bauteil vermisst, nutze einfach den 'Fehler melden'-Button direkt auf der jeweiligen Bauteilseite oder schreibe mir eine Nachricht über das Kontaktformular.

Ist die Nutzung kostenlos und wie steht es um den Datenschutz?

Aktuell ist die Nutzung von PinoutDatabase komplett kostenlos und ohne Registrierung möglich. Alle interaktiven Web-Tools laufen rein clientseitig in deinem Browser. Ausführliche Details zur Datenverarbeitung findest du direkt auf der Datenschutzseite.