ADM3053 Isolated CAN Transceiver
Isolated CAN transceiver with iCoupler data isolation and isoPower isolated DC-DC supply. Slope control on RS; standby when RS is high. 20 pins.
Aliase:ADM3053
SOIC-20 Top View
20 Pins
Pin-Tabelle20
| Pin | Signal / Name | Typ | Alternative Funktionen |
|---|---|---|---|
| 1 | GND1 | Ground | Ground, logic side |
| 2 | NC | NC | No connect, do not connect |
| 3 | GND1 | Ground | Ground, logic side |
| 4 | RxD | Digital | Receiver output data |
| 5 | TxD | Digital | Driver input data |
| 6 | VIO | Power | iCoupler power supply, decouple to GND1 |
| 7 | GND1 | Ground | Ground, logic side |
| 8 | VCC | Power | isoPower power supply, decouple to pin 9 |
| 9 | GND1 | Ground | Ground, logic side |
| 10 | GND1 | Ground | Ground, logic side |
| 11 | GND2 | Ground | Ground for isolated DC-DC converter |
| 12 | VISOOUT | Power | Isolated power supply output, tie to VISOIN |
| 13 | GND2 | Ground | Ground for isolated DC-DC converter |
| 14 | VREF | Analog | Reference voltage output, not to be connected |
| 15 | CANL | Digital | Low-level CAN voltage input/output |
| 16 | GND2 | Ground | Ground, bus side |
| 17 | CANH | Digital | High-level CAN voltage input/output |
| 18 | RS | Digital | Slope control, short to GND2 for full speed; high = standby |
| 19 | VISOIN | Power | Isolated power supply input, tie to VISOOUT |
| 20 | GND2 | Ground | Ground, bus side |