Pinouts & Pin-Belegungen
für Stecker & Buchsen.

Pin-Belegungen für USB-C, HDMI, DisplayPort, Ethernet RJ45, SATA, M.2, ATX & Audio-Stecker.

Bereits 276+ Bauteile verfügbar

Alle Boards, Chips & Stecker

Entwicklungsplattformen, Mikrocontroller, ICs und Standard-Schnittstellen

Connector
Intel / Formfactors.org

4-Pin PWM PC Fan Connector

Standard 4-pin 2.54mm pitch polarized motherboard connector for PC cooling fans featuring Ground, +12V DC power, Tachometer RPM feedback pulse, and 25 kHz PWM speed control.

Connector
Intel / Molex (Mini-Fit Jr.)

ATX 24-Pin Motherboard Power Supply

Standard 24-pin dual-row power connector defined in ATX12V 2.0+ specifications providing +3.3V, +5V, +12V, -12V, +5VSB standby power, PS_ON# power switch, and PWR_OK signal.

Connector
USB-IF (USB Implementers Forum)

Micro-USB Type-B 5-Pin Interface

Compact 5-pin USB 2.0 connector with dedicated OTG ID pin for dynamic host/device mode negotiation.

Connector
PCI-SIG

PCI Express 8-Pin Power Connector

Standard 8-pin PCIe power connector for high-performance graphics cards (GPUs). Delivers up to 150W of +12V power via 3 main +12V rails, 3 Ground rails, and 2 Sense detection pins.

Connector
SD Association

SD Card Interface

Standard 9-pin full-size Secure Digital (SD/SDHC/SDXC) memory card interface and host socket supporting SDIO 4-bit parallel bus mode and 1-bit SPI serial bus mode with physical write-protect lock switch.

Connector
SATA-IO (Serial ATA International Organization)

Serial ATA (SATA) 15-Pin Power Connector

Standard 15-pin power interface for SATA drives delivering +3.3V, +5V, +12V DC power lines with staggered pre-charge contacts for hot-plugging.

Connector
IBM / VESA

VGA (DE-15 / D-Sub 15-Pin Interface)

Standard 15-pin 3-row D-Sub connector for analog RGB component video signals, horizontal/vertical synchronization, and DDC2B (I2C) display communication.

Connector
CTIA / OMTP (Telecommunications Standard)

3.5mm TRRS 4-Pole Audio/Headset Jack

Standard 3.5mm (1/8") 4-conductor miniature audio connector for stereo audio output and microphone input (CTIA standard: Left, Right, Ground, Mic).

Connector
Apple Inc.

Apple Lightning Connector

Proprietary 8-pin reversible connector used for Apple iOS devices (iPhone, iPad, iPod) carrying power (VBUS), high-speed differential USB data, and accessory control signals.

Connector
SSIF / Intel

EPS12V 8-Pin CPU Power Connector

Standard 8-pin EPS12V motherboard power connector delivering high-current +12V DC power directly to the CPU VRM voltage regulator module (up to 336W).

Connector
TIA / EIA (Telecommunications Industry Association)

RJ45 8P8C Modular Connector (Ethernet)

8-position 8-contact modular connector for twisted pair Ethernet networking (10Base-T, 100Base-TX, 1000Base-T Gigabit, and Power over Ethernet / PoE).

Connector
EIA / TIA (Electronic Industries Alliance)

RS-232 Serial Port DB9 (DE-9)

Standard 9-pin D-Sub connector for asynchronous serial data communication (RS-232 / EIA-232) and industrial CAN bus interfaces.

Connector
SATA-IO (Serial ATA International Organization)

Serial ATA (SATA) 7-Pin Data Connector

Standard 7-pin L-shaped interface for high-speed serial storage devices (HDDs, SSDs, optical drives) up to SATA Revision 3.0 (6 Gbit/s).

Connector
SD Association

microSD Card Interface

Standard 8-pin microSD memory card interface supporting SDIO 4-bit parallel bus mode and 1-bit SPI serial bus mode for microcontrollers and embedded systems.

Connector
Molex

Molex 4-Pin LP4 Power Connector

Standard 4-pin LP4 peripheral power connector used for desktop PC drives, liquid cooling pumps, fans, and internal hardware (+12V and +5V rails).

Häufige Fragen & Transparenz

Wissenswertes zu Datenquellen, Nutzung und Datenschutz

Woher stammen die Pinout-Daten und Spezifikationen?

Die Pinout-Daten und technischen Angaben basieren auf den Datenblättern der jeweiligen Hersteller sowie frei zugänglichen Dokumentationen und öffentlichen Quellen. Da PinoutDatabase ein unabhängiges Projekt ist, das ich als Einzelperson pflege, gebe ich mein Bestes für hohe Genauigkeit, Fehler können aber natürlich vorkommen.

Darf ich die Grafiken nutzen und wie werden sie erstellt?

Die SVG-Vektordateien und PNG-Grafiken dürfen für private Zwecke frei heruntergeladen und verwendet werden. Die Diagramme erstelle ich je nach Bauteil entweder manuell oder generiere sie automatisiert anhand der jeweiligen Gehäuse-Bauform und Pinbelegung.

Fehler entdeckt oder ein Bauteil fehlt? Wie kann ich Feedback geben?

Feedback aus der Community ist sehr willkommen! Wenn du einen Fehler entdeckst oder ein bestimmtes Bauteil vermisst, nutze einfach den 'Fehler melden'-Button direkt auf der jeweiligen Bauteilseite oder schreibe mir eine Nachricht über das Kontaktformular.

Ist die Nutzung kostenlos und wie steht es um den Datenschutz?

Aktuell ist die Nutzung von PinoutDatabase komplett kostenlos und ohne Registrierung möglich. Alle interaktiven Web-Tools laufen rein clientseitig in deinem Browser. Ausführliche Details zur Datenverarbeitung findest du direkt auf der Datenschutzseite.