# TJA1051 High-Speed CAN Transceiver

- **Manufacturer**: NXP Semiconductors
- **Type**: Chip
- **Year**: 2010
- **URL (German)**: https://pinoutdb.org/component/tja1051t
- **URL (English)**: https://pinoutdb.org/en/component/tja1051t
- **Description**: High-Speed CAN Transceiver, silent mode, SOIC-8
- **Datasheets & Links**:
  - [TJA1051 Datasheet (PDF)](http://www.nxp.com/docs/en/data-sheet/TJA1051.pdf) (datasheet)

## View: SOIC-8 Top View (Package: dip)

| Pin | Signal Name | Type | Alternative Functions / Description |
| :--- | :--- | :--- | :--- |
| 1 | TXD | Digital | CAN TX Data Input — from MCU CAN controller; LOW drives bus dominant; HIGH = recessive; 3.3V/5V logic compatible [Input] |
| 2 | GND | Ground | System Ground (0V) [Ground] |
| 3 | VCC | Power | Positive Power Supply (+4.5V to +5.5V DC); add 100nF bypass cap to GND near pin [Power] |
| 4 | RXD | Digital | CAN RX Data Output — to MCU CAN controller; LOW = bus dominant; HIGH = recessive; push-pull output [Output] |
| 5 | NC | NC | - |
| 6 | CANL | Digital | CAN Bus Low — differential bus line; dominant = 1.5V, recessive = 2.5V; terminate with 120Ω between CANH and CANL at each end [Bidirectional] |
| 7 | CANH | Digital | CAN Bus High — differential bus line; dominant = 3.5V, recessive = 2.5V; terminate with 120Ω between CANH and CANL at each end [Bidirectional] |
| 8 | S | Digital | Silent Mode Select — LOW: normal operation; HIGH: silent mode (TXD disabled, RXD still active, no bus disturbance); tie LOW if not needed [Control] |


---
Source: PinoutDatabase (https://pinoutdb.org). Verify against the manufacturer datasheet before production use.
