# SSD1306 0.96" I2C / SPI OLED Display Module

- **Manufacturer**: Solomon Systech / Generic
- **Type**: Module
- **Year**: 2008
- **URL (German)**: https://pinoutdb.org/component/ssd1306-0-96-oled
- **URL (English)**: https://pinoutdb.org/en/component/ssd1306-0-96-oled
- **Description**: Standard monochrome 128x64 dot matrix OLED display module driven by the SSD1306 controller with built-in charge pump and support for 4-pin I2C and 7-pin SPI pinouts.
- **Datasheets & Links**:
  - [Solomon Systech SSD1306 Datasheet (PDF)](https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf) (datasheet)
  - [Adafruit SSD1306 Arduino Library GitHub](https://github.com/adafruit/Adafruit_SSD1306) (github)

## View: 4-Pin I2C Header (Package: pin_header)

| Pin | Signal Name | Type | Alternative Functions / Description |
| :--- | :--- | :--- | :--- |
| 1 | GND | Ground | Ground (0V) [Ground] |
| 2 | VCC | Power | Power Supply (+3.3V to +5V DC) [Power] |
| 3 | SCL | Digital | I2C Serial Clock Line (SCK) [I2C] |
| 4 | SDA | Digital | I2C Serial Data Line (SDA) [I2C] |


## View: 7-Pin SPI Header (Package: pin_header)

| Pin | Signal Name | Type | Alternative Functions / Description |
| :--- | :--- | :--- | :--- |
| 1 | GND | Ground | Ground (0V) [Ground] |
| 2 | VCC | Power | Power Supply (+3.3V to +5V DC) [Power] |
| 3 | D0 | Digital | SPI Clock (SCK [SPI], CLK) [Clock] |
| 4 | D1 | Digital | SPI Data Input (MOSI [SPI], DIN) [SPI] |
| 5 | RES | Digital | Reset (Active Low) [Reset] |
| 6 | DC | Digital | Data/Command Control Pin [Digital] |
| 7 | CS | Digital | Chip Select (Active Low) [SPI] |


---
Source: PinoutDatabase (https://pinoutdb.org). Verify against the manufacturer datasheet before production use.
