# RC522 13.56 MHz RFID / NFC Reader Module (MFRC522)

- **Manufacturer**: NXP Semiconductors / Generic
- **Type**: Module
- **Year**: 2006
- **URL (German)**: https://pinoutdb.org/component/rc522
- **URL (English)**: https://pinoutdb.org/en/component/rc522
- **Description**: Popular contactless 13.56 MHz RFID reader/writer module based on the MFRC522 IC, supporting ISO/IEC 14443 A / MIFARE cards via SPI interface.
- **Datasheets & Links**:
  - [NXP MFRC522 Datasheet (PDF)](https://www.nxp.com/docs/en/data-sheet/MFRC522.pdf) (datasheet)
  - [MFRC522 Arduino Library GitHub](https://github.com/miguelbalboa/rfid) (github)

## View: 8-Pin Male Header (Top View) (Package: pin_header)

| Pin | Signal Name | Type | Alternative Functions / Description |
| :--- | :--- | :--- | :--- |
| 1 | SDA | Digital | SPI Chip Select / NSS (Active Low) — pull LOW to select module; used as SDA label on module silkscreen [SPI] |
| 2 | SCK | Digital | SPI Serial Clock (max 10MHz) [SPI] |
| 3 | MOSI | Digital | SPI Master Out Slave In [SPI] |
| 4 | MISO | Digital | SPI Master In Slave Out [SPI] |
| 5 | IRQ | Digital | Interrupt Output [Interrupt] |
| 6 | GND | Ground | Ground (0V) [Ground] |
| 7 | RST | Digital | Reset [Reset], Power-Down (Active Low) — LOW puts module into power-down/reset state [Control] |
| 8 | 3V3 | Power | Supply Voltage (+3.3V ONLY - NOT 5V TOLERANT) [Power] |


---
Source: PinoutDatabase (https://pinoutdb.org). Verify against the manufacturer datasheet before production use.
