# Raspberry Pi Compute Module Zero (CM0 / CM0Lite)

- **Manufacturer**: Raspberry Pi Ltd
- **Type**: Module
- **Year**: 2026
- **URL (German)**: https://pinoutdb.org/component/raspberry-pi-compute-module-zero
- **URL (English)**: https://pinoutdb.org/en/component/raspberry-pi-compute-module-zero
- **Description**: Compact 39mm x 33mm System-on-Module based on Raspberry Pi Zero 2 W with RP3A0 SiP (quad-core 64-bit BCM2837 @ 1GHz, 512MB LPDDR2, optional 8GB/16GB eMMC or Lite) featuring 132 castellated edge pins at 1mm pitch.
- **Datasheets & Links**:
  - [Raspberry Pi Compute Module Zero Datasheet (PDF)](https://pip.raspberrypi.com/) (datasheet)
  - [Official Raspberry Pi Documentation](https://www.raspberrypi.com/documentation/computers/compute-module.html) (docs)

## View: 132-Pin Castellated Edge Pinout (Top View) (Package: custom)

| Pin | Signal Name | Type | Alternative Functions / Description |
| :--- | :--- | :--- | :--- |
| 1 | GND | Ground | Ground (0 V) [Ground] |
| 2 | DSI_D3_P | Digital | DSI Display Data 3 Positive (Differential) [Differential] |
| 3 | DSI_D3_N | Digital | DSI Display Data 3 Negative (Differential) [Differential] |
| 4 | GND | Ground | Ground (0 V) [Ground] |
| 5 | DSI_D2_P | Digital | DSI Display Data 2 Positive (Differential) [Differential] |
| 6 | DSI_D2_N | Digital | DSI Display Data 2 Negative (Differential) [Differential] |
| 7 | GND | Ground | Ground (0 V) [Ground] |
| 8 | DSI_CK_P | Digital | DSI Display Clock Positive (Differential) [Clock] |
| 9 | DSI_CLK_N | Digital | DSI Display Clock Negative (Differential) [Clock] |
| 10 | GND | Ground | Ground (0 V) [Ground] |
| 11 | DSI_D1_P | Digital | DSI Display Data 1 Positive (Differential) [Differential] |
| 12 | DSI_D1_N | Digital | DSI Display Data 1 Negative (Differential) [Differential] |
| 13 | GND | Ground | Ground (0 V) [Ground] |
| 14 | DSI_D0_P | Digital | DSI Display Data 0 Positive (Differential) [Differential] |
| 15 | DSI_D0_N | Digital | DSI Display Data 0 Negative (Differential) [Differential] |
| 16 | GND | Ground | Ground (0 V) [Ground] |
| 17 | HDMI_HPD | Digital | Input HDMI Hotplug Detect (internally pulled down 100k, 5V tolerant) [Input] |
| 18 | HDMI_SDA | Digital | Bidirectional HDMI I2C SDA (internally pulled up 1.8k to 3.3V, 5V tolerant) [I2C] |
| 19 | HDMI_SCL | Digital | Bidirectional HDMI I2C SCL (internally pulled up 1.8k to 3.3V, 5V tolerant) [Clock] |
| 20 | HDMI_CEC | Digital | HDMI Consumer Electronics Control (internally pulled up 27k, 5V tolerant) [Digital] |
| 21 | GND | Ground | Ground (0 V) [Ground] |
| 22 | HDMI_CK_N | Digital | Output HDMI Clock Negative [Clock] |
| 23 | HDMI_CK_P | Digital | Output HDMI Clock Positive [Clock] |
| 24 | GND | Ground | Ground (0 V) [Ground] |
| 25 | HDMI_D0_N | Digital | Output HDMI TX0 Negative [Differential] |
| 26 | HDMI_D0_P | Digital | Output HDMI TX0 Positive [Differential] |
| 27 | GND | Ground | Ground (0 V) [Ground] |
| 28 | HDMI_D1_N | Digital | Output HDMI TX1 Negative [Differential] |
| 29 | HDMI_D1_P | Digital | Output HDMI TX1 Positive [Differential] |
| 30 | GND | Ground | Ground (0 V) [Ground] |
| 31 | HDMI_D2_N | Digital | Output HDMI TX2 Negative [Differential] |
| 32 | HDMI_D2_P | Digital | Output HDMI TX2 Positive [Differential] |
| 33 | GND | Ground | Ground (0 V) [Ground] |
| 34 | GND | Ground | Ground (0 V) [Ground] |
| 35 | USB_N | Digital | USB 2.0 High-Speed Differential Data Negative (D-) [Differential] |
| 36 | USB_P | Digital | USB 2.0 High-Speed Differential Data Positive (D+) [Differential] |
| 37 | GND | Ground | Ground (0 V) [Ground] |
| 38 | USB_OTG | Digital | USB OTG ID Pin (internally pulled up; ground for USB Host mode) [Input] |
| 39 | CVBS | Analog | Analog Composite Video Output (requires 75 Ohm termination) [Analog] |
| 40 | GND | Ground | Ground (0 V) [Ground] |
| 41 | CM0_3.3V | Power | Regulated 3.3V Power Output (max 300mA per pin, 600mA total) [Power] |
| 42 | SDA0 | Digital | I2C Data Pin (GPIO44, used for camera/display; 1.8k pullup) [I2C] |
| 43 | SCL0 | Digital | I2C Clock Pin (GPIO45, used for camera/display; 1.8k pullup) [Clock] |
| 44 | CAM_GPIO | Digital | Camera Control Signal / GPIO40 (3.3V signal) [Digital] |
| 45 | GND | Ground | Ground (0 V) [Ground] |
| 46 | CSI_D3_P | Digital | CSI Camera Data 3 Positive (Differential) [Differential] |
| 47 | CSI_D3_N | Digital | CSI Camera Data 3 Negative (Differential) [Differential] |
| 48 | GND | Ground | Ground (0 V) [Ground] |
| 49 | CSI_D2_P | Digital | CSI Camera Data 2 Positive (Differential) [Differential] |
| 50 | CSI_D2_N | Digital | CSI Camera Data 2 Negative (Differential) [Differential] |
| 51 | GND | Ground | Ground (0 V) [Ground] |
| 52 | CSI_CK_P | Digital | CSI Camera Clock Positive (Differential) [Clock] |
| 53 | CSI_CK_N | Digital | CSI Camera Clock Negative (Differential) [Clock] |
| 54 | GND | Ground | Ground (0 V) [Ground] |
| 55 | CSI_D1_P | Digital | CSI Camera Data 1 Positive (Differential) [Differential] |
| 56 | CSI_D1_N | Digital | CSI Camera Data 1 Negative (Differential) [Differential] |
| 57 | GND | Ground | Ground (0 V) [Ground] |
| 58 | CSI_D0_P | Digital | CSI Camera Data 0 Positive (Differential) [Differential] |
| 59 | CSI_D0_N | Digital | CSI Camera Data 0 Negative (Differential) [Differential] |
| 60 | GND | Ground | Ground (0 V) [Ground] |
| 61 | RUN_PG | Digital | Bidirectional Reset / Power Good (drive low via 220 Ohm to reset) [Reset] |
| 62 | GLOBAL_EN | Digital | Global Power Enable Input (drive low to power off; internal 10k to 5V) [Input] |
| 63 | GND | Ground | Ground (0 V) [Ground] |
| 64 | CM0_1.8V | Power | Regulated 1.8V Power Output (max 300mA per pin, 600mA total) [Power] |
| 65 | CM0_1.8V | Power | Regulated 1.8V Power Output (max 300mA per pin, 600mA total) [Power] |
| 66 | GND | Ground | Ground (0 V) [Ground] |
| 67 | 5V | Power | Main 5V DC Power Input (4.75V to 5.25V) [Power] |
| 68 | 5V | Power | Main 5V DC Power Input (4.75V to 5.25V) [Power] |
| 69 | GND | Ground | Ground (0 V) [Ground] |
| 70 | NC | NC | Do not connect / Reserved [NC] |
| 71 | NC | NC | Do not connect / Reserved [NC] |
| 72 | GND | Ground | Ground (0 V) [Ground] |
| 73 | GPIO21 | Digital | General Purpose I/O Pin 21 (PCM_DOUT / SPI1_SCLK / GPCLK1) [Digital] |
| 74 | GPIO20 | Digital | General Purpose I/O Pin 20 (PCM_DIN / SPI1_MOSI / GPCLK0) [Digital] |
| 75 | GND | Ground | Ground (0 V) [Ground] |
| 76 | GPIO26 | Digital | General Purpose I/O Pin 26 [Digital] |
| 77 | GPIO16 | Digital | General Purpose I/O Pin 16 (SPI1_CS2 / UART0_CTS) [Digital] |
| 78 | GND | Ground | Ground (0 V) [Ground] |
| 79 | GPIO19 | Digital | General Purpose I/O Pin 19 (PCM_FS / SPI1_MISO / PWM1) [Digital] |
| 80 | GPIO13 | Digital | General Purpose I/O Pin 13 (PWM1 / DPI_D9) [Digital] |
| 81 | GND | Ground | Ground (0 V) [Ground] |
| 82 | GPIO12 | Digital | General Purpose I/O Pin 12 (PWM0 / DPI_D8) [Digital] |
| 83 | GPIO6 | Digital | General Purpose I/O Pin 6 (GPCLK2 / DPI_D2) [Digital] |
| 84 | GND | Ground | Ground (0 V) [Ground] |
| 85 | GPIO5 | Digital | General Purpose I/O Pin 5 (GPCLK1 / DPI_D1) [Digital] |
| 86 | ID_SC | Digital | HAT EEPROM I2C Clock / GPIO1 [Clock] |
| 87 | GND | Ground | Ground (0 V) [Ground] |
| 88 | ID_SD | Digital | HAT EEPROM I2C Data / GPIO0 [I2C] |
| 89 | GPIO7 | Digital | General Purpose I/O Pin 7 (SPI0_CE1_N / DPI_D3) [Digital] |
| 90 | GND | Ground | Ground (0 V) [Ground] |
| 91 | GPIO8 | Digital | General Purpose I/O Pin 8 (SPI0_CE0_N / DPI_D4) [Digital] |
| 92 | GPIO11 | Digital | General Purpose I/O Pin 11 (SPI0_SCLK / DPI_D7) [Clock] |
| 93 | GND | Ground | Ground (0 V) [Ground] |
| 94 | GPIO25 | Digital | General Purpose I/O Pin 25 [Digital] |
| 95 | GPIO9 | Digital | General Purpose I/O Pin 9 (SPI0_MISO / DPI_D5) [Digital] |
| 96 | GND | Ground | Ground (0 V) [Ground] |
| 97 | GPIO10 | Digital | General Purpose I/O Pin 10 (SPI0_MOSI / DPI_D6) [Digital] |
| 98 | GPIO24 | Digital | General Purpose I/O Pin 24 [Digital] |
| 99 | GND | Ground | Ground (0 V) [Ground] |
| 100 | GND | Ground | Ground (0 V) [Ground] |
| 101 | GPIO23 | Digital | General Purpose I/O Pin 23 [Digital] |
| 102 | GPIO22 | Digital | General Purpose I/O Pin 22 [Digital] |
| 103 | GND | Ground | Ground (0 V) [Ground] |
| 104 | GPIO27 | Digital | General Purpose I/O Pin 27 [Digital] |
| 105 | GPIO18 | Digital | General Purpose I/O Pin 18 (PCM_CLK / PWM0) [Digital] |
| 106 | GND | Ground | Ground (0 V) [Ground] |
| 107 | GPIO17 | Digital | General Purpose I/O Pin 17 (SPI1_CS1 / UART0_RTS) [Digital] |
| 108 | GPIO15 | Digital | General Purpose I/O Pin 15 (UART0_RXD / UART1_RXD) [Digital] |
| 109 | GND | Ground | Ground (0 V) [Ground] |
| 110 | GPIO14 | Digital | General Purpose I/O Pin 14 (UART0_TXD / UART1_TXD) [Digital] |
| 111 | GPIO4 | Digital | General Purpose I/O Pin 4 (GPCLK0 / DPI_D0) [Digital] |
| 112 | GND | Ground | Ground (0 V) [Ground] |
| 113 | GPIO3 | Digital | General Purpose I/O Pin 3 (I2C1_SCL / 1.8k pull-up) [Clock] |
| 114 | GPIO2 | Digital | General Purpose I/O Pin 2 (I2C1_SDA / 1.8k pull-up) [I2C] |
| 115 | GND | Ground | Ground (0 V) [Ground] |
| 116 | WiFi_ON | Digital | Wi-Fi Power Enable (drive low to disable Wi-Fi; internal 10k pull-up) [Input] |
| 117 | BT_ON | Digital | Bluetooth Power Enable (drive low to disable BT; internal 10k pull-up) [Input] |
| 118 | LED_nACT | Digital | Active-Low System Activity LED Signal (max 5mA) [Output] |
| 119 | CM0_3.3V | Power | Regulated 3.3V Power Output (max 300mA per pin, 600mA total) [Power] |
| 120 | GPIO_VREF | Digital | GPIO Bank Voltage Supply Input (Connect to CM0_3.3V or CM0_1.8V) [Power] |
| 121 | nRPI_BOOT | Digital | Force USB Bootloader Mode (pull low to boot over USB) [Input] |
| 122 | SD_VREF | Digital | SDIO Interface Voltage Reference (CM0Lite: connect to 3.3V or 1.8V) [Power] |
| 123 | GND | Ground | Ground (0 V) [Ground] |
| 124 | SD_DAT1 | Digital | SDIO Data Line 1 (CM0Lite only) [Digital] |
| 125 | SD_DAT0 | Digital | SDIO Data Line 0 (CM0Lite only) [Digital] |
| 126 | GND | Ground | Ground (0 V) [Ground] |
| 127 | SD_CLK | Digital | SDIO Clock Signal (CM0Lite only) [Clock] |
| 128 | SD_CMD | Digital | SDIO Command / Response Signal (CM0Lite only) [Digital] |
| 129 | GND | Ground | Ground (0 V) [Ground] |
| 130 | SD_DAT3 | Digital | SDIO Data Line 3 (CM0Lite only) [Digital] |
| 131 | SD_DAT2 | Digital | SDIO Data Line 2 (CM0Lite only) [Digital] |
| 132 | GND | Ground | Ground (0 V) [Ground] |


---
Source: PinoutDatabase (https://pinoutdb.org). Verify against the manufacturer datasheet before production use.
