# PCA9685 16-Channel 12-Bit PWM / Servo Driver

- **Manufacturer**: NXP Semiconductors / Adafruit
- **Type**: Module
- **Year**: 2009
- **URL (German)**: https://pinoutdb.org/component/pca9685
- **URL (English)**: https://pinoutdb.org/en/component/pca9685
- **Description**: I2C-bus controlled 16-channel LED and PWM controller optimized for RGB/RGBA color backlighting and 12-bit servo motor control up to 1.6 kHz.
- **Datasheets & Links**:
  - [NXP PCA9685 Datasheet (PDF)](https://www.nxp.com/docs/en/data-sheet/PCA9685.pdf) (datasheet)
  - [Adafruit PCA9685 16-Channel Servo Driver Guide](https://learn.adafruit.com/16-channel-pwm-servo-driver) (docs)

## View: 6-Pin I2C Control Header (Package: pin_header)

| Pin | Signal Name | Type | Alternative Functions / Description |
| :--- | :--- | :--- | :--- |
| 1 | GND | Ground | Ground Reference (0V) [Ground] |
| 2 | ~OE | Digital | Output Enable (Active Low) — HIGH disables all PWM outputs; tie to GND for always-enabled [Control] |
| 3 | SCL | Digital | I2C Serial Clock (up to 1 MHz Fast-Mode Plus) [I2C] |
| 4 | SDA | Digital | I2C Serial Data [I2C] |
| 5 | VCC | Power | Logic Supply Voltage (3.0V to 5.5V DC) [Power] |
| 6 | V+ | Power | Servo / High-Power Rail (+5V to +6V DC, max 10A via terminal block) — powers servo motors; independent from VCC logic supply [Power] |


---
Source: PinoutDatabase (https://pinoutdb.org). Verify against the manufacturer datasheet before production use.
