# nRF24L01+ 2.4GHz Wireless Transceiver Module

- **Manufacturer**: Nordic Semiconductor
- **Type**: Module
- **Year**: 2008
- **URL (German)**: https://pinoutdb.org/component/nrf24l01-plus
- **URL (English)**: https://pinoutdb.org/en/component/nrf24l01-plus
- **Description**: Ultra low-power 2Mbps 2.4 GHz RF transceiver with Enhanced ShockBurst hardware protocol accelerator and 2x4 (8-pin) male header.
- **Datasheets & Links**:
  - [Nordic Semiconductor nRF24L01+ Product Specification (PDF)](https://infocenter.nordicsemi.com/pdf/nRF24L01P_PS_v1.0.pdf) (datasheet)
  - [RF24 Arduino Driver Library GitHub](https://github.com/nRF24/RF24) (github)

## View: 2x4 Male Header (Top View) (Package: pin_header)

| Pin | Signal Name | Type | Alternative Functions / Description |
| :--- | :--- | :--- | :--- |
| 1 | GND | Ground | Ground (0V) [Ground] |
| 2 | VCC | Power | +1.9V to +3.6V Supply Voltage (MAX 3.6V - 5V WILL DESTROY CHIP) [Power] |
| 3 | CE | Digital | Chip Enable — HIGH activates RX or TX mode; LOW puts module in standby [Control] |
| 4 | CSN | Digital | SPI Chip Select Not (Active Low) [SPI] |
| 5 | SCK | Digital | SPI Serial Clock (max 10 MHz) [SPI] |
| 6 | MOSI | Digital | SPI Master Out Slave In (5V Tolerant) [SPI] |
| 7 | MISO | Digital | SPI Master In Slave Out [SPI] |
| 8 | IRQ | Digital | Interrupt Request (Active Low) [Interrupt] |


---
Source: PinoutDatabase (https://pinoutdb.org). Verify against the manufacturer datasheet before production use.
