# NE555 Precision Single Timer

- **Manufacturer**: Signetics / TI
- **Type**: Chip
- **Year**: 1972
- **URL (German)**: https://pinoutdb.org/component/ne555d
- **URL (English)**: https://pinoutdb.org/en/component/ne555d
- **Description**: Precision Timers, 555 compatible, SOIC-8
- **Datasheets & Links**:
  - [NE555 Datasheet (PDF)](http://www.ti.com/lit/ds/symlink/ne555.pdf) (datasheet)

## View: SOIC-8 Top View (Package: dip)

| Pin | Signal Name | Type | Alternative Functions / Description |
| :--- | :--- | :--- | :--- |
| 1 | GND | Ground | System Ground (0V) [Ground] |
| 2 | TRIG | Analog | Trigger Input — when voltage falls below 1/3 VCC, output goes HIGH and timing begins; active-low pulse input [Input] |
| 3 | OUT | Digital | Timer Output — HIGH during timing period; can source/sink up to 200mA; connect LED/relay directly [Output] |
| 4 | RST | Digital | Reset (Active Low) — forces output LOW and discharge transistor ON regardless of other inputs; tie to VCC if unused [Reset] |
| 5 | CONT | Analog | Control Voltage — direct access to internal 2/3 VCC voltage divider; connect 10nF cap to GND to reduce noise; can be used to modulate threshold [Analog] |
| 6 | THRES | Analog | Threshold — when voltage rises above 2/3 VCC, output goes LOW and discharge transistor turns ON [Analog] |
| 7 | DISCH | Digital | Discharge — open-collector switch connects timing capacitor to GND during output LOW phase; connect to RC timing network [Output] |
| 8 | VCC | Power | Positive Supply Voltage (+4.5V to +16V; add 100nF bypass cap to GND near pin) [Power] |


---
Source: PinoutDatabase (https://pinoutdb.org). Verify against the manufacturer datasheet before production use.
