# MCP6002 1MHz Low-Power Rail-to-Rail Dual Op-Amp

- **Manufacturer**: Microchip Technology
- **Type**: Chip
- **Year**: 2004
- **URL (German)**: https://pinoutdb.org/component/mcp6002
- **URL (English)**: https://pinoutdb.org/en/component/mcp6002
- **Description**: 1MHz, Low-Power Op Amp, DIP-8
- **Datasheets & Links**:
  - [MCP6002 Datasheet (PDF)](http://ww1.microchip.com/downloads/en/DeviceDoc/21733j.pdf) (datasheet)

## View: DIP-8 Top View (Package: dip)

| Pin | Signal Name | Type | Alternative Functions / Description |
| :--- | :--- | :--- | :--- |
| 1 | OUT A | Analog | Amplifier Output, Channel A — rail-to-rail output; drives within 25mV of each supply rail [Analog] |
| 2 | INA- | Analog | Inverting Input (-), Channel A [Analog] |
| 3 | INA+ | Analog | Non-Inverting Input (+), Channel A — rail-to-rail input range (0V to VDD) [Analog] |
| 4 | VSS | Ground | Negative Supply / Ground (0V for single-supply operation; +1.8V to +6.0V range) [Ground] |
| 5 | INB+ | Analog | Non-Inverting Input (+), Channel B — rail-to-rail input range (0V to VDD) [Analog] |
| 6 | INB- | Analog | Inverting Input (-), Channel B [Analog] |
| 7 | OUT B | Analog | Amplifier Output, Channel B — rail-to-rail output; drives within 25mV of each supply rail [Analog] |
| 8 | VDD | Power | Positive Supply Voltage (+1.8V to +6.0V; add 100nF bypass cap to VSS near pin) [Power] |


---
Source: PinoutDatabase (https://pinoutdb.org). Verify against the manufacturer datasheet before production use.
