# LM741 General Purpose Operational Amplifier

- **Manufacturer**: Texas Instruments
- **Type**: Chip
- **Year**: 1968
- **URL (German)**: https://pinoutdb.org/component/lm741
- **URL (English)**: https://pinoutdb.org/en/component/lm741
- **Description**: Operational Amplifier, DIP-8/TO-99-8
- **Datasheets & Links**:
  - [LM741 Datasheet (PDF)](http://www.ti.com/lit/ds/symlink/lm741.pdf) (datasheet)

## View: DIP-8 Top View (Package: dip)

| Pin | Signal Name | Type | Alternative Functions / Description |
| :--- | :--- | :--- | :--- |
| 1 | NULL | Analog | Offset Null Pin 1 — connect 10kΩ pot between pins 1 and 5 with wiper to V- to null input offset voltage; leave NC if offset nulling not required [Analog] |
| 2 | INA- | Analog | Inverting Input (-) — output swings negative when this input rises above IN+ [Analog] |
| 3 | INA+ | Analog | Non-Inverting Input (+) — output swings positive when this input rises above IN- [Analog] |
| 4 | V- | Ground | Negative Supply Voltage (typically -15V for bipolar ±15V operation; add 100nF bypass cap to V+) [Ground] |
| 5 | NULL | Analog | Offset Null Pin 2 — see pin 1; connect 10kΩ pot wiper to V-, with ends at pins 1 and 5 [Analog] |
| 6 | OUT A | Analog | Amplifier Output — swings to within ~2V of each supply rail; short-circuit protected; drives up to ±25mA [Analog] |
| 7 | V+ | Power | Positive Supply Voltage (typically +15V for bipolar ±15V operation; ±5V to ±18V range; add 100nF bypass cap to V-) [Power] |
| 8 | NC | NC | - |


---
Source: PinoutDatabase (https://pinoutdb.org). Verify against the manufacturer datasheet before production use.
