# LM386 Low Voltage Audio Power Amplifier

- **Manufacturer**: Texas Instruments
- **Type**: Chip
- **Year**: 1980
- **URL (German)**: https://pinoutdb.org/component/lm386
- **URL (English)**: https://pinoutdb.org/en/component/lm386
- **Description**: Low Voltage Audio Power Amplifier, DIP-8/SOIC-8/SSOP-8
- **Datasheets & Links**:
  - [LM386 Datasheet (PDF)](http://www.ti.com/lit/ds/symlink/lm386.pdf) (datasheet)

## View: DIP-8 Top View (Package: dip)

| Pin | Signal Name | Type | Alternative Functions / Description |
| :--- | :--- | :--- | :--- |
| 1 | GAIN | Analog | Gain Control Pin 1 — connect a capacitor (10µF) between pins 1 and 8 for 200× gain; add resistor in series to set gain between 20× and 200×; leave open for default 20× gain [Control] |
| 2 | INA- | Analog | Inverting Input (-) — typically connected to GND via bypass cap or directly; differential input with pin 3 [Analog] |
| 3 | INA+ | Analog | Non-Inverting Input (+) — audio signal input; biased internally to V+/2; couple through a capacitor from source [Analog] |
| 4 | GND | Ground | System Ground (0V) [Ground] |
| 5 | OUT A | Analog | Audio Output — biased at V+/2; connect to speaker via series coupling capacitor (220–470µF) and optional Zobel network (10Ω + 47nF to GND) for stability [Analog] |
| 6 | V+ | Power | Positive Supply Voltage (+4V to +12V; add 100µF + 100nF bypass caps to GND near pin) [Power] |
| 7 | BYPASS | Analog | Internal Voltage Divider Bypass — connect 10µF capacitor to GND to reduce power supply noise and improve PSRR; leave NC if unused (performance degrades) [Analog] |
| 8 | GAIN | Analog | Gain Control Pin 8 — used together with pin 1; connect capacitor (10µF) between pins 1 and 8 for 200× gain; default gain with no connection is 20× [Control] |


---
Source: PinoutDatabase (https://pinoutdb.org). Verify against the manufacturer datasheet before production use.
