# LM311 Voltage Comparator with Strobe

- **Manufacturer**: Texas Instruments
- **Type**: Chip
- **Year**: 1970
- **URL (German)**: https://pinoutdb.org/component/lm311
- **URL (English)**: https://pinoutdb.org/en/component/lm311
- **Description**: Voltage Comparator, DIP-8/SOIC-8
- **Datasheets & Links**:
  - [LM311 Datasheet (PDF)](https://www.st.com/resource/en/datasheet/lm311.pdf) (datasheet)

## View: DIP-8 Top View (Package: dip)

| Pin | Signal Name | Type | Alternative Functions / Description |
| :--- | :--- | :--- | :--- |
| 1 | GND | Ground | Output Emitter (Ground) — emitter of open-collector output transistor; connect to GND for single-supply or to negative rail for bipolar supply [Ground] |
| 2 | INA+ | Analog | Non-Inverting Input (+) — output goes HIGH when IN+ > IN- [Analog] |
| 3 | INA- | Analog | Inverting Input (-) — output goes LOW when IN- > IN+ [Analog] |
| 4 | V- | Ground | Negative Supply — connect to negative rail (bipolar operation, e.g. -15V) [Ground], Ground (0V) — connect to GND for single-supply operation [Ground] |
| 5 | BAL | Analog | Offset Balance / Strobe — connect with pin 6 via 20kΩ pot between V+ and V- to null input offset; when used as strobe, driving LOW forces output LOW regardless of input; leave NC if unused [Control] |
| 6 | BAL | Analog | Offset Balance — second balance pin; used together with pin 5 for offset null adjustment; leave NC if unused [Analog] |
| 7 | OUT | Digital | Comparator Output (Open-Collector) — requires external pull-up resistor to desired voltage; output LOW when IN+ < IN-, high-Z (HIGH via pull-up) when IN+ > IN- [Output] |
| 8 | V+ | Power | Positive Supply Voltage (+5V to +36V single-supply, or ±15V bipolar) [Power] |


---
Source: PinoutDatabase (https://pinoutdb.org). Verify against the manufacturer datasheet before production use.
