# L293 Quadruple Half-H Drivers

- **Manufacturer**: STMicroelectronics / TI
- **Type**: Chip
- **Year**: 1986
- **URL (German)**: https://pinoutdb.org/component/l293
- **URL (English)**: https://pinoutdb.org/en/component/l293
- **Description**: Quadruple Half-H motor driver IC providing four independently controlled half-bridge outputs rated 600mA each; no internal flyback diodes (add external diodes for inductive loads).
- **Datasheets & Links**:
  - [L293 Datasheet (PDF)](http://www.ti.com/lit/ds/symlink/l293.pdf) (datasheet)

## View: DIP-16 Top View (Package: dip)

| Pin | Signal Name | Type | Alternative Functions / Description |
| :--- | :--- | :--- | :--- |
| 1 | EN1,2 | Digital | Channel 1 & 2 Enable (Active High — HIGH enables outputs 1Y/2Y; PWM here controls motor speed) [Control] |
| 2 | 1A | Digital | Channel 1 Logic Input (HIGH: 1Y = HIGH; LOW: 1Y = LOW when EN1,2 is HIGH) [Input] |
| 3 | 1Y | Digital | Channel 1 Output (connect to motor terminal A; state follows 1A when EN1,2 is HIGH) [Output] |
| 4 | GND | Ground | Ground / Heat Sink (solder pad pairs 4,5 and 12,13 to ground plane or copper pour) [Ground] |
| 5 | GND | Ground | Ground / Heat Sink [Ground] |
| 6 | 2Y | Digital | Channel 2 Output (connect to motor terminal B; state follows 2A when EN1,2 is HIGH) [Output] |
| 7 | 2A | Digital | Channel 2 Logic Input (HIGH: 2Y = HIGH; LOW: 2Y = LOW when EN1,2 is HIGH) [Input] |
| 8 | VCC2 | Power | Motor Power Supply (+4.5V to +36V; powers channels 1–4 output stages) [Power] |
| 9 | EN3,4 | Digital | Channel 3 & 4 Enable (Active High — HIGH enables outputs 3Y/4Y; PWM here controls motor speed) [Control] |
| 10 | 3A | Digital | Channel 3 Logic Input (HIGH: 3Y = HIGH; LOW: 3Y = LOW when EN3,4 is HIGH) [Input] |
| 11 | 3Y | Digital | Channel 3 Output (connect to motor terminal A; state follows 3A when EN3,4 is HIGH) [Output] |
| 12 | GND | Ground | Ground / Heat Sink [Ground] |
| 13 | GND | Ground | Ground / Heat Sink [Ground] |
| 14 | 4Y | Digital | Channel 4 Output (connect to motor terminal B; state follows 4A when EN3,4 is HIGH) [Output] |
| 15 | 4A | Digital | Channel 4 Logic Input (HIGH: 4Y = HIGH; LOW: 4Y = LOW when EN3,4 is HIGH) [Input] |
| 16 | VCC1 | Power | Logic Power Supply (+5V; powers internal logic and input buffers; separate from motor supply VCC2) [Power] |


---
Source: PinoutDatabase (https://pinoutdb.org). Verify against the manufacturer datasheet before production use.
