# JST-XH 4-Pin 2.54mm Wire-to-Board Connector

- **Manufacturer**: JST Manufacturing Co.
- **Type**: Connector
- **Year**: 1985
- **URL (German)**: https://pinoutdb.org/component/jst-xh-4pin
- **URL (English)**: https://pinoutdb.org/en/component/jst-xh-4pin
- **Description**: Standard 4-pin 2.54mm (0.1 inch) pitch wire-to-board polarized disconnectable connector. Universally utilized for 3D printer stepper motor wiring, endstops, I2C/UART interconnect cables, and 3S LiPo battery balancing ports with a 3A current rating.
- **Datasheets & Links**:
  - [JST XH Series Official Technical Catalog (PDF)](https://www.jst-mfg.com/product/pdf/eng/eXH.pdf) (datasheet)
  - [JST XH Series Product Page](https://www.jst.com/products/crimp-style-connectors-wire-to-board-type/xh-connector/) (manufacturer)

## View: 4-Pin Header Top View (Package: jst_xh)

| Pin | Signal Name | Type | Alternative Functions / Description |
| :--- | :--- | :--- | :--- |
| 1 | PIN_1 | Power | Pin 1: Power VCC (+3.3V / +5V / +12V) / LiPo Cell 1 Tap / Stepper Phase A+ [Power] |
| 2 | PIN_2 | Digital | Pin 2: Signal / TX / SDA / LiPo Cell 2 Tap / Stepper Phase A- [Digital] |
| 3 | PIN_3 | Digital | Pin 3: Signal / RX / SCL / LiPo Cell 3 Tap / Stepper Phase B+ [Digital] |
| 4 | PIN_4 | Ground | Pin 4: Ground (GND 0V) / LiPo Common Negative / Stepper Phase B- [Ground] |


---
Source: PinoutDatabase (https://pinoutdb.org). Verify against the manufacturer datasheet before production use.
