# NodeMCU V2 (ESP8266 / ESP-12E)

- **Manufacturer**: Espressif Systems
- **Type**: Board
- **Year**: 2014
- **URL (German)**: https://pinoutdb.org/component/esp8266-nodemcu
- **URL (English)**: https://pinoutdb.org/en/component/esp8266-nodemcu
- **Description**: Popular Wi-Fi development board powered by the ESP8266 32-bit Tensilica L106 microcontroller running at 80/160 MHz, with integrated USB-UART, 4MB Flash, and 30 breadboard-friendly pins.
- **Datasheets & Links**:
  - [ESP8266EX Datasheet (PDF)](https://www.espressif.com/sites/default/files/documentation/0a-esp8266ex_datasheet_en.pdf) (datasheet)
  - [ESP8266 Arduino Core Documentation](https://arduino-esp8266.readthedocs.io/) (docs)
  - [NodeMCU GitHub Repository](https://github.com/nodemcu/nodemcu-devkit-v1.0) (github)

## View: 30-Pin Dual-Inline Pinout (Package: board_dual)

| Pin | Signal Name | Type | Alternative Functions / Description |
| :--- | :--- | :--- | :--- |
| 1 | A0 | Analog | Analog In ADC0 (max 3.3V with onboard divider) [ADC] |
| 2 | RSV | NC | Reserved [NC] |
| 3 | RSV | NC | Reserved [NC] |
| 4 | SD3 | Digital | SPI Data 3 (GPIO10 - Flash internal) [SPI] |
| 5 | SD2 | Digital | SPI Data 2 (GPIO9 - Flash internal) [SPI] |
| 6 | SD1 | Digital | SPI MOSI (GPIO8 - Flash internal) [SPI] |
| 7 | CMD | Digital | SPI CS (GPIO11 - Flash internal) [SPI] |
| 8 | SD0 | Digital | SPI MISO (GPIO7 - Flash internal) [SPI] |
| 9 | CLK | Digital | SPI SCLK (GPIO6 - Flash internal) [SPI] |
| 10 | GND | Ground | Ground (0V) [Ground] |
| 11 | 3V3 | Power | +3.3V Power Rail Output [Power] |
| 12 | EN | Digital | Chip Enable (High = Active) [Reset] |
| 13 | RST | Digital | External Reset (Active Low) [Reset] |
| 14 | GND | Ground | Ground (0V) [Ground] |
| 15 | VIN | Power | External Input Voltage (5V-9V DC) [Power] |
| 16 | D0 | Digital | GPIO16 [GPIO], Deep Sleep Wake (WAKE) [Reset] |
| 17 | D1 | Digital | GPIO5 [GPIO], I2C SCL [I2C] |
| 18 | D2 | Digital | GPIO4 [GPIO], I2C SDA [I2C] |
| 19 | D3 | Digital | GPIO0 [GPIO], Boot Mode Select (FLASH) [Debug] |
| 20 | D4 | Digital | GPIO2 [GPIO], Built-in Blue LED [LED], Boot Mode [Debug] |
| 21 | 3V3 | Power | +3.3V Power Rail [Power] |
| 22 | GND | Ground | Ground (0V) [Ground] |
| 23 | D5 | Digital | GPIO14 [GPIO], HSPI SCLK [SPI] |
| 24 | D6 | Digital | GPIO12 [GPIO], HSPI MISO [SPI] |
| 25 | D7 | Digital | GPIO13 [GPIO], HSPI MOSI [SPI], UART2 RXD [UART] |
| 26 | D8 | Digital | GPIO15 [GPIO], HSPI CS [SPI], Boot Mode (Pull-down) [Debug] |
| 27 | RX | Digital | GPIO3 [GPIO], UART0 RXD [UART] |
| 28 | TX | Digital | GPIO1 [GPIO], UART0 TXD [UART] |
| 29 | GND | Ground | Ground (0V) [Ground] |
| 30 | 3V3 | Power | +3.3V Power Rail [Power] |


---
Source: PinoutDatabase (https://pinoutdb.org). Verify against the manufacturer datasheet before production use.
