# ESP8266 ESP-01 / ESP-01S Wi-Fi Module

- **Manufacturer**: Espressif Systems / Ai-Thinker
- **Type**: Module
- **Year**: 2014
- **URL (German)**: https://pinoutdb.org/component/esp8266-esp01
- **URL (English)**: https://pinoutdb.org/en/component/esp8266-esp01
- **Description**: Ultra-compact 2.4 GHz Wi-Fi module with integrated TCP/IP stack, 32-bit Tensilica MCU, and 2x4 (8-pin) 2.54mm pitch header.
- **Datasheets & Links**:
  - [ESP8266EX Datasheet (PDF)](https://www.espressif.com/sites/default/files/documentation/0a-esp8266ex_datasheet_en.pdf) (datasheet)
  - [ESP-01 Module Documentation (Ai-Thinker)](https://docs.ai-thinker.com/esp8266) (docs)

## View: 2x4 Male Header (Top View) (Package: pin_header)

| Pin | Signal Name | Type | Alternative Functions / Description |
| :--- | :--- | :--- | :--- |
| 1 | GND | Ground | Ground (0V) [Ground] |
| 2 | TXD | Digital | UART0 TXD [UART], GPIO1 [GPIO] |
| 3 | GPIO2 | Digital | GPIO2 — General Purpose I/O (must be HIGH during boot for normal operation; LOW selects UART1 debug output) [GPIO], TXD1 — UART1 Transmit (debug output only; active during boot) [UART] |
| 4 | CH_PD | Digital | Chip Power Down [Power], Chip Enable — must be pulled HIGH (≥0.9V) for normal operation; do not leave floating [Control] |
| 5 | GPIO0 | Digital | GPIO0 — General Purpose I/O [GPIO], Boot Mode Select — pull LOW during reset to enter flash programming mode (UART download); HIGH = normal boot [Control] |
| 6 | RST | Digital | External Reset (Active Low) [Reset] |
| 7 | RXD | Digital | UART0 RXD [UART], GPIO3 [GPIO] |
| 8 | VCC | Power | +3.3V Power Supply (DO NOT CONNECT 5V) [Power] |


---
Source: PinoutDatabase (https://pinoutdb.org). Verify against the manufacturer datasheet before production use.
