# DS1307 64 x 8 Serial Real-Time Clock (I2C)

- **Manufacturer**: Maxim Integrated / Analog Devices
- **Type**: Chip
- **Year**: 2001
- **URL (German)**: https://pinoutdb.org/component/ds1307
- **URL (English)**: https://pinoutdb.org/en/component/ds1307
- **Description**: 64 x 8, Serial, I2C Real-time clock, 4.5V to 5.5V VCC, 0°C to +70°C, DIP-8
- **Datasheets & Links**:
  - [DS1307 Datasheet (PDF)](https://datasheets.maximintegrated.com/en/ds/DS1307.pdf) (datasheet)

## View: DIP-8 Top View (Package: dip)

| Pin | Signal Name | Type | Alternative Functions / Description |
| :--- | :--- | :--- | :--- |
| 1 | X1 | Digital | Crystal Oscillator Input — connect 32.768kHz crystal; load capacitors per crystal spec [Oscillator] |
| 2 | X2 | Digital | Crystal Oscillator Output — connect to crystal only; do not load [Oscillator] |
| 3 | VBAT | Power | Backup Battery Input (2.5V–3.5V, e.g. CR2032 via diode); maintains timekeeping when VCC is absent or below 1.25×VBAT [Power] |
| 4 | GND | Ground | System Ground (0V) [Ground] |
| 5 | SDA | Digital | I2C Serial Data Line (requires 4.7kΩ pull-up; address fixed at 0x68) [I2C] |
| 6 | SCL | Digital | I2C Serial Clock Line (max 100kHz) [I2C] |
| 7 | SQW/OUT | Digital | SQW — Square Wave Output (open-drain; programmable: 1Hz, 4.096kHz, 8.192kHz, 32.768kHz; requires pull-up) [Clock], OUT — General-Purpose Output bit (when SQW disabled; level set by OUT bit in control register) [Output] |
| 8 | VCC | Power | Positive Power Supply [Power] |


---
Source: PinoutDatabase (https://pinoutdb.org). Verify against the manufacturer datasheet before production use.
