# ATtiny13 8-Bit AVR Microcontroller (DIP-8)

- **Manufacturer**: Microchip / Atmel
- **Type**: Chip
- **Year**: 2004
- **URL (German)**: https://pinoutdb.org/component/attiny13
- **URL (English)**: https://pinoutdb.org/en/component/attiny13
- **Description**: 20MHz, 1kB Flash, 64B SRAM, 64B EEPROM, debugWIRE, DIP-8
- **Datasheets & Links**:
  - [ATtiny13 Datasheet (PDF)](http://ww1.microchip.com/downloads/en/DeviceDoc/doc2535.pdf) (datasheet)

## View: DIP-8 Top View (Package: dip)

| Pin | Signal Name | Type | Alternative Functions / Description |
| :--- | :--- | :--- | :--- |
| 1 | RESET/PB5 | Digital | Reset Input (Active Low; pull HIGH with 10kΩ for normal operation) [Reset], ADC0 — ADC Channel 0 Input [Analog], dW — debugWIRE Interface (single-wire debug) [Digital], PCINT5 — Pin Change Interrupt 5 [Digital] |
| 2 | PB3 | Digital | CLKI — External Clock Input (when selected via fuse) [Oscillator], ADC3 — ADC Channel 3 Input [Analog], PCINT3 — Pin Change Interrupt 3 [Digital] |
| 3 | PB4 | Digital | ADC2 — ADC Channel 2 Input [Analog], PCINT4 — Pin Change Interrupt 4 [Digital] |
| 4 | GND | Ground | System Ground (0V) [Ground] |
| 5 | PB0 | Digital | MOSI — SPI Master Out / Slave In [SPI], AIN0 — Analog Comparator Positive Input [Analog], OC0A — Timer/Counter0 Compare Match A Output (PWM) [PWM], PCINT0 — Pin Change Interrupt 0 [Digital] |
| 6 | PB1 | Digital | MISO — SPI Master In / Slave Out [SPI], AIN1 — Analog Comparator Negative Input [Analog], OC0B — Timer/Counter0 Compare Match B Output (PWM) [PWM], PCINT1 — Pin Change Interrupt 1 [Digital] |
| 7 | PB2 | Digital | SCK — SPI Clock [SPI], ADC1 — ADC Channel 1 Input [Analog], T0 — Timer/Counter0 External Clock Input [Clock], INT0 — External Interrupt 0 [Digital], PCINT2 — Pin Change Interrupt 2 [Digital] |
| 8 | VCC | Power | Positive Power Supply (1.8V – 5.5V) [Power] |


---
Source: PinoutDatabase (https://pinoutdb.org). Verify against the manufacturer datasheet before production use.
